ST03771AT-DCabin and interiors
Installation of an Airplane Interior .
FAA holder: Gulfstream Aerospace Corporation
FAA STC category
Cabin and interiors STCs
Seating, cabin arrangement, galley, lavatory, entertainment, and interior changes. This directory contains 4,850 selected records listed with status Current in the June 30, 2026 FAA DRS snapshot and links every entry to its source.
Showing 3,001–3,120 of 4,850Page 26 of 41
View record
ST02063SECabin and interiors
Installation of new sidewalls and a cabin lighting system into the first class area of Boeing 747-400 airplanes.
FAA holder: Northwest Aerospace Technologies Inc
ST10898SC-DCabin and interiors
Installation of an Executive Interior.
FAA holder: Associated Air Center LP
ST02294LACabin and interiors
Installation of Cabin Interior Noise Reduction Kit.
FAA holder: Aircraft Technical Development Inc. dba Aerocon Engineering Company
ST02827CHCabin and interiors
Installation of In-flight Entertainment (IFE) System Relocation/Upgrade and Lavatory 1F-1C Installation.
FAA holder: Envoy Aerospace LLC
ST01527WI-DCabin and interiors
Installation of Microwave Oven in the Right Hand Forward Galley on Learjet 60XR aircraft.
FAA holder: Learjet Inc
SA2460NMCabin and interiors
Installation of all economy seating arrangement.
FAA holder: Five Star Airlines
SA2565CE-DCabin and interiors
Install Duncan Aviation, Inc., Cabin Flood System.
FAA holder: Duncan Aviation Inc
ST01376ATCabin and interiors
Installation of a MAS 2000E audio/video passenger entertainment system.
FAA holder: EJM Aerospace Services
ST02533ATCabin and interiors
Installation of a General Dynamics EmPower AC In-Seat Power Supply.
FAA holder: EJM Aerospace Services
ST02535ATCabin and interiors
Installation of a General Dynamics EmPower AC In-seat power supply system.
FAA holder: EJM Aerospace Services
ST03763AT-DCabin and interiors
ONE ONLY STC, SN 5211: Installation of an aft passenger cabin flight crew sleeping facility, mid cabin bulkheads and ottoman storage assembly.
FAA holder: Gulfstream Aerospace Corporation
ST02274LACabin and interiors
ONE ONLY STC Model 777-200 (Serial Number 30214) - Interior Modifications.
FAA holder: Regent Aerospace Corporation
ST02409ATCabin and interiors
One-time only installation of interior with coat closets, cabin divider, four C39b single sleeper seats (TSO C39b) with adapter plates, 40 first-class double seats (TSO C39b), club table, two-seat and five-seat settees (not for TTL occupancy), bar unit, and lamp. Approved for serial number 27924 ONLY.
FAA holder: Flight Services Group
SR09519RCCabin and interiors
Installation of Night Vision Goggle Compatible Interior Lighting System.
FAA holder: Aero Dynamix Inc.
ST01982SECabin and interiors
Removal of existing In-Flight Entertainment (IFE) overhead monitors and installation of new Imagik 17" LCD bulkhead and overhead monitors.
FAA holder: Imagik International Corporation
ST10971SCCabin and interiors
Installation of interior components.
FAA holder: COMTECH Aviation Services Inc.
SA00793SECabin and interiors
Installation of cabin door loop manufactured.
FAA holder: Sterling Paul M
ST02056SECabin and interiors
Redecoration of various interior components on Boeing Model 747-400 series aircraft.
FAA holder: Marlin Engineering Inc.
ST02779NYCabin and interiors
The installation of the 16G Side Facing Mid Cabin Divan modification.
FAA holder: ACS-NAI Limited
SH7927SWCabin and interiors
Installation of limousine style cabin/cockpit window divider.
FAA holder: Texas Aviation Services
SR09148RCCabin and interiors
Installation of 2-Place passenger seating.
FAA holder: Texas Aviation Services
SA01576WICabin and interiors
Installation of seat headrest assembly.
FAA holder: Aviation Fabricators Inc
ST03755AT-DCabin and interiors
Installation of an Airplane Interior.
FAA holder: Gulfstream Aerospace Corporation
ST03648AT-DCabin and interiors
Installation of a Cabin/Baggage Compartment.
FAA holder: Gulfstream Aerospace Corporation
ST02052SECabin and interiors
Installation of new sidewalls and cabin lighting system in the first class area of Boeing 777-200 airplanes.
FAA holder: Northwest Aerospace Technologies Inc
SA03273ATCabin and interiors
Installation of an air conditioning and pressurization system, Peter Schiff Aero s Cabin Comfort Unit (CCU).
FAA holder: Peter Schiff Aero Inc.
ST00297BOCabin and interiors
Installation and activation of an International Communications Group (ICG) NxtMail Server Cabin Wireless Local Area Network (CWLAN).
FAA holder: Learjet Inc.
ST03752AT-DCabin and interiors
Installation of an Airplane Interior.
FAA holder: Gulfstream Aerospace Corporation
ST03751AT-DCabin and interiors
Installation of 16 Passenger Cabin Interior; S/N 5251 only.
FAA holder: Gulfstream Aerospace Corporation
ST10487SC-DCabin and interiors
Relocation of passenger seats in the F/C cabin in accordance with American Airlines Master Data List J1359-MDL, Revision A, dated 8 February 2010 or later FAA approved revision.
FAA holder: American Airlines Inc
ST03750AT-DCabin and interiors
Installation of an Airplane Interior.
FAA holder: Gulfstream Aerospace Corporation
SH1099CECabin and interiors
Installation of cabin heater and engine exhaust tail pipe extension.
FAA holder: Kinzie Industries Inc.
ST02771NYCabin and interiors
Upgrade the existent cabin lighting from fluorescent and incandescent to LED.
FAA holder: Innotech Aviation a Division of IMP Group Limited
ST02047SECabin and interiors
Installation of a new seats and In Flight Entertainment system into Boeing 777-300ER airplanes.
FAA holder: Northwest Aerospace Technologies Inc
ST10968SCCabin and interiors
Installation of a cabin/cockpit AC power supply system for personal electronic device(s) and a TIA convection oven and its controller.
FAA holder: ASIG LLC
ST01881SE-DCabin and interiors
Installation of an interior reconfiguration on Boeing Model 777-300ER series aircraft in accordance with Jamco America, Inc., Master drawing List MDL1268-1, Rev. C, dated January 19, 2010, or later Federal Aviation Administration (FAA) approved revision.
FAA holder: Jamco America Inc
ST10967SCCabin and interiors
Installation of an Executive Interior.
FAA holder: Gore Design Completions Ltd
ST02265LACabin and interiors
Installation of the Newport Aeronautical Development interior modification.
FAA holder: Newport Aeronautical Development
ST03748AT-DCabin and interiors
Installation of an Airplane Interior.
FAA holder: Gulfstream Aerospace Corporation
SA10955SCCabin and interiors
Installation of a passenger seating system to replace five existing Decrane single seats with Model FS1101 single seats.
FAA holder: Piaggio America Inc.
SR09562RCCabin and interiors
Installation of Night Vision Goggle Compatible Interior Lighting System.
FAA holder: Aero Dynamix Inc.
ST03746AT-DCabin and interiors
Installation of an Airplane Interior.
FAA holder: Gulfstream Aerospace Corporation
SA03469ATCabin and interiors
Installation of an Equipment Console, Model AEC 1100, in the passenger cabin interior.
FAA holder: Pilatus Business Aircraft
SA1390SWCabin and interiors
Modification of divan, 2-place jump seat, and large refreshment center.
FAA holder: Mitsubishi Heavy Industries America Inc
ST00016ATCabin and interiors
Installation of a 126-passenger tourist class seating configuration.
FAA holder: Burns Aerospace Corporation
ST01221ATCabin and interiors
Installation of a Matsushita System 2000E entertainment system.
FAA holder: EJM Aerospace Services
ST01394ATCabin and interiors
Installation of a MAS 2000E Audio/ Video Passenger Entertainment System.
FAA holder: EJM Aerospace Services
ST03823ATCabin and interiors
Installation of Passenger Cabin Electrically Powered Window Shades.
FAA holder: Aerospace Technologies Group Inc.
SA1746SOCabin and interiors
Manufacture and installation of pallet assemblies for a palletized seat system.
FAA holder: Pemco Aeroplex Inc
SA3447NMCabin and interiors
Installation of a executive interior in the cabin compartment, modification of the flight station, and installation of instrumentation and communications equipment. (L-1011-385-3 S/N 193G, 1250 AND UP).
FAA holder: Lockheed Martin Aeronautics Company
SA5304NM-DCabin and interiors
Reconfiguration of interior seating.This approval is limited to Boeing 747-273C, Serial No. 20651.
FAA holder: Lockheed Martin Aeronautics Company
ST03742AT-DCabin and interiors
Installation of a Cabin/Baggage Compartment (FGH).
FAA holder: Gulfstream Aerospace Corporation
ST02722NYCabin and interiors
Installation of Cabin Management System Upgrade.
FAA holder: Innotech Aviation a Division of IMP Group Limited
ST02745NYCabin and interiors
The installation of In-flight Entertainment System.
FAA holder: Aero Consulting Services Ltd.
ST01697SECabin and interiors
Cabin altitude reversion to 6,500 feet in lieu of 8,000 feet at 41,000 feet flight altitude (Lower Cabin Altitude modification).
FAA holder: Boeing Company The
SA1474GLCabin and interiors
Install Aero Fabricators shoulder harness and seat belt assembly.
FAA holder: Aero Fabricators Co
ST10650SC-DCabin and interiors
Installation of Mid Cabin Cabinet Structural Installation in accordance with Data List Report No. F9EX-01066, Revision J dated 4-16-08, or later FAA approved revision.
FAA holder: Dassault Falcon Jet Corp.
ST10957SCCabin and interiors
Installation of Interior Cabinets Only Zero Passengers.
FAA holder: AeroNautique
ST01958SE-DCabin and interiors
Interior reconfiguration of Boeing Model 747-400 series airplanes in accordance with Jamco America, Inc. Master Drawing List (MDL) No. MDL1309-1, Revision J, dated September 28, 2009, or later Federal Aviation Administration (FAA) approved revision.
FAA holder: Jamco America Inc
SA09642AC-DCabin and interiors
Installation of Cabin Configuration for Flight Inspection Operations.
FAA holder: Aviation Systems Standards, Aircraft Maintenance and Engineering Division AVN-300
SA09643AC-DCabin and interiors
Installation of Cabin Configuration for Flight Inspection Operations.
FAA holder: Aviation Systems Standards, Aircraft Maintenance and Engineering Division AVN-300
SH110WECabin and interiors
Dual Foldable/Rigid Internal Litter Installation of the left side of the passenger compartment.
FAA holder: Air Space Design and Manufacturing LLC
SH87WECabin and interiors
Installation of twin litters on the left side of the interior passenger compartment including the supporting structure and a moveable center door post.
FAA holder: Air Space Design and Manufacturing LLC
ST01791SE-DCabin and interiors
Installation of a lavatory and galley modification on Boeing Model 747-400 series airplanes in accordance with Jamco America, Inc. Master Drawing List (MDL) No. IA-143MDL, Revision C, dated September 18, 2009, or later Federal Aviation Administration (FAA) approved revision.
FAA holder: Jamco America Inc
ST02357AKCabin and interiors
Limit the maximum passenger seating capacity to 19.
FAA holder: Peninsula Airways Inc
ST02756CH-DCabin and interiors
Installation of an in flight entertainment (IFE) system.
FAA holder: Standard Aero
ST03730AT-DCabin and interiors
Installation of an Airplane Interior.
FAA holder: Gulfstream Aerospace Corporation
ST10927SCCabin and interiors
Installation of an International Water Guard, model IWG-A4, water purification system and associated wiring and plumbing in the aft lavatory.
FAA holder: Dassault Falcon Jet Corporation
ST10929SCCabin and interiors
Installation of an International Water Guard, model IWG-A4, water purification system and associated wiring and plumbing in the aft lavatory of Falcon 2000 and Falcon 2000ex aircraft.
FAA holder: Dassault Falcon Jet Corporation
ST10922SCCabin and interiors
Installation of Cabin Interior Furnishings and Systems.
FAA holder: Hawker Beechcraft Corporation
SA1248SOCabin and interiors
Installation of single point seat belt and shoulder harness restraint systems for the pilot's, co-pilot's, forward observer's and flight attendant's seat assemblies.
FAA holder: Pemco Aeroplex Inc
SA1428SOCabin and interiors
Installation of 76 first class passenger seat interior.
FAA holder: Pemco Aeroplex Inc
SA1489SOCabin and interiors
Installation of 68 first class seat interior and related equipment.
FAA holder: Pemco Aeroplex Inc
SA1579SOCabin and interiors
Installation of a ninety four (94) first class passenger seat interior.
FAA holder: Pemco Aeroplex Inc
SA1740SOCabin and interiors
Installation of a class B combination cargo/passenger compartment.
FAA holder: Pemco World Air Services
SA2200SOCabin and interiors
Modification of floor panels and seat tracks.
FAA holder: Pemco Aeroplex Inc
SA3246SOCabin and interiors
Installation of interior cabin modification.
FAA holder: Pemco Aeroplex Inc
SA3267SOCabin and interiors
This modification will allow interior reconfiguration .
FAA holder: Pemco Aeroplex Inc
ST00123ATCabin and interiors
Passenger interior reconfiguration. (737-300 SERIES S/N 26284).
FAA holder: Pemco Aeroplex Inc
ST00379ATCabin and interiors
Installation of passenger interior configuration.
FAA holder: Pemco Aeroplex Inc
ST00497ATCabin and interiors
Installation of passenger interior configuration.
FAA holder: Pemco Aeroplex Inc
ST01008ATCabin and interiors
Installation of an interior modification including galley and lavatory and passenger seat rearrangement.
FAA holder: Pemco Aeroplex Inc
ST01009ATCabin and interiors
Installation of an interior modification including galley, dividers, stowage closets, and passenger seat rearrangement.
FAA holder: Pemco Aeroplex Inc
ST1035SOCabin and interiors
Installation of a combination passenger/cargo interior to include all cargo, 44 passenger/cargo, 10 passenger/cargo, and 6 passenger/cargo configurations. (340 MODIFIED IN ACCORDANCE WITH STC SA4-1100) (440 MILITARY C-131E MODIFIED IN ACCORDANCE WITH ST C SA4-1100.
FAA holder: Pemco Aeroplex Inc
ST02642NY-DCabin and interiors
Update of a Panasonic System 2000E In-Flight Passenger Entertainment System to a System 2000E Hybrid.
FAA holder: Delta Engineering Corporation
ST00129BOCabin and interiors
Installation of executive interior modifications. Applies to Boeing model 757-2G4.
FAA holder: Greenpoint Technologies
ST03696AT-DCabin and interiors
Installation of an Airplane Interior.
FAA holder: Gulfstream Aerospace Corporation
SR0258NY-DCabin and interiors
Installation of a RosenView VX Moiving Map / DVD Player Cabin Entertainment System.
FAA holder: Keystone Helicopter Corp.
ST02719NYCabin and interiors
Complete Custom Aircraft Interior Installation.
FAA holder: Bombardier Inc
SA02353AK-DCabin and interiors
Fabrication and installation of F. Atlee Dodge Aircraft Services, LLC P/N 6103-01 (left) and/or 6103-02 (right) rear jump seat.
FAA holder: F. Atlee Dodge Aircraft Services, LLC
SA2575SOCabin and interiors
Installation of the Fenwall Lavatory Smoke Detector System.
FAA holder: Kosola & Associates Inc
SA2584SOCabin and interiors
Installation of 107 Passenger Interior.
FAA holder: Kosola & Associates Inc
SA2639SOCabin and interiors
Modification of forward passenger cabin seating.
FAA holder: Kosola & Associates Inc
ST01007LA-DCabin and interiors
Installation of Hollingsead Sentry One Cabin Mounted Video Camera System.
FAA holder: Audio International
ST01008LA-DCabin and interiors
Installation of Hollingsead International Sentry One Cabin Mounted Video Camera System.
FAA holder: Audio International
ST02715NYCabin and interiors
Installation of a VIP and Economy Configuration Interior.
FAA holder: Field Aviation Co, Inc
SA03716ATCabin and interiors
Installation of an EMTEQ Aerospace Seat Warmer System (SWS).
FAA holder: Hawker Beechcraft Corporation
ST02708NYCabin and interiors
Complete Custom Aircraft Interior modification to be completed.
FAA holder: DECA Aviation Engineering Limited
SA2591AWECabin and interiors
Installation of an Interior Arrangement.
FAA holder: United Air Lines Inc
SA2755NM-DCabin and interiors
Replace first class seats and increase coach seating.
FAA holder: United Air Lines Inc
SA2837WE-DCabin and interiors
Install new lavatory module/bustle assembly at door 2 RH/LH, underfloor plumbing and related systems, modified main deck floor support structure, external service panel.
FAA holder: United Air Lines Inc
SA3591WE-DCabin and interiors
Installs new lavatory module/ bustle assembly at door 2 RH/LH, underfloor plumbing and related systems, modified main deck floor support structure, external service panel.
FAA holder: United Air Lines Inc
ST10854SC-DCabin and interiors
Installation of Mid Cabin Settee Installation.
FAA holder: Dassault Falcon Jet Corp.
ST02700CH-DCabin and interiors
One Time Installation of a 12 Passenger Executive Interior.
FAA holder: Gulfstream Aerospace Corporation