STC SA09452AC-D
FAA DRS lists SA09452AC-D as Current · Issued, held by S-TEC Corporation, for Reims Aviation SA F182Q. Recorded change: Installation of S-TEC System 40X/40X Single and Two Axis Automatic Flight Guidance Systems, Model ST-793-40X/50X. Snapshot dated June 30, 2026.
Recorded modification
What the FAA record covers
Installation of S-TEC System 40X/40X Single and Two Axis Automatic Flight Guidance Systems, Model ST-793-40X/50X.
SA09452AC-D identifies the approval, recorded holder, named aircraft, and modification scope. It does not confirm kit availability, serial-number effectivity, data rights, price, or installation authority.
Applicability
Aircraft named in FAA DRS
Named aircraft: Reims Aviation SA F182Q. Confirm the approved model list, serial effectivity, configuration, and certificate revision.
Buyer checks
Confirm before sourcing
- 01Does it cover the exact Reims Aviation SA F182Q model, serial range, and configuration?
- 02Which configuration, parts, installation data, limitations, and ICAs apply?
- 03Who can legally supply the design data, kit, instructions, and ICAs?
- 04What parts, labor, conformity, and return-to-service work are excluded?
Related other aircraft modifications STCs
Installation of a Vertical Fin Cap with LED Light Kit in accordance with Master Drawing List AA-04133 Revision D dated August 5, 2010, or later FAA approved revision. Instructions for Continued Airworthiness, AAI Report Number AA-06111, Rev. B dated January 15, 2010, or later FTW AEG accepted revision is required.
FAA holder: Bell Helicopter Textron Inc.
Fabrication of Aerometals, LLC, Transmission Oil Seals in accordance with Master Drawing List Aero-MDL-004, dated November 9, 2009, or later FAA-approved revision; and installation in accordance with the corresponding Aerometals Installation Instructions, as referenced on the continuation page.
FAA holder: Aerometals
Fabrication of Aerometals, LLC, Transmission Oil Seals in accordance with Master Drawing List Aero-MDL-004, dated November 9, 2009, or later FAA-approved revision; and installation in accordance with the corresponding Aerometals Installation Instructions, as referenced on the continuation page.
FAA holder: Aerometals
: Fabrication of Aerometals Output Spline Spray Nozzle in accordance with Aerometals Master Drawing List No. Aero-MDL-009, Revision NC, dated April 30, 2009, or later FAA-approved revision; and installation in accordance with Aerometals Installation Instructions No. Aero-Inst-009, Revision NC, dated April 30, 2009, or later FAA-approved revision.
FAA holder: Aerometals