STC SA125CE
FAA DRS lists SA125CE as Current · Reissued, held by BF Goodrich Aerospace, for Kelowna Flightcraft R & D 340, Kelowna Flightcraft R & D 440, and Kelowna Flightcraft R & D 240 Series. Recorded change: Installation of Hoskins Supplemental Model B of F High Intensity Wing Tip Lights, Model C or 30-0329-3 Dual Tail Light, with or without Model 2 High Intensity Fuselage Lights. Snapshot dated June 30, 2026.
Recorded modification
What the FAA record covers
Installation of Hoskins Supplemental Model B of F High Intensity Wing Tip Lights, Model C or 30-0329-3 Dual Tail Light, with or without Model 2 High Intensity Fuselage Lights.
SA125CE identifies the approval, recorded holder, named aircraft, and modification scope. It does not confirm kit availability, serial-number effectivity, data rights, price, or installation authority.
Applicability
Aircraft named in FAA DRS
Named aircraft: Kelowna Flightcraft R & D 340, Kelowna Flightcraft R & D 440, and Kelowna Flightcraft R & D 240 Series. Confirm the approved model list, serial effectivity, configuration, and certificate revision.
Buyer checks
Confirm before sourcing
- 01Does it cover the exact Kelowna Flightcraft R & D 340 and Kelowna Flightcraft R & D 440, and 1 more aircraft configuration model, serial range, and configuration?
- 02Which configuration, loads, materials, inspections, and damage limits apply?
- 03Who can legally supply the design data, kit, instructions, and ICAs?
- 04What parts, labor, conformity, and return-to-service work are excluded?
Related aircraft structures STCs
Replace the Cameron Balloons US burner with Thunder & Colt (B2EU) and (B3EU)) Stratus double burner via standard burner frame gimbal block.
FAA holder: Cameron Balloons US
Installation of Powertech Electronic Powered Window Shades in accordance with Aerospace Technologies Group (ATG) Engineering Drawing List LIEDL30001, Revision A, Dated October 20, 2008, or later FAA approved revision.
FAA holder: Aerospace Technologies Group Inc.
a. Fuselage and wing Fatigue Life Expended (FLE) based on Quest s usage profile and recorded flight data. b. Fabrication and installation of the fuselage and wing identification placards in accordance with Quest Diagnostics document No.QDTBM-2010-007, Rev.A. c. The aircraft must be maintained in accordance with Section 6 (Instructions for Continued Airworthiness) of the Maintenance Plan for Continued Airworthiness, QDTBM-2010-006, Rev.A and dated June 13, 2011.
FAA holder: Quest Diagnostics
Installation of vortex generators on wing upper surfaces in accordance with J.V.E., Inc. Drawing List JVE-501, Revision IR, dated 01/05/96, and Installation Manual JVE-0596, Revision IR, dated 01/05/96, or later FAA approved revisions.
FAA holder: D'Shannon Products Ltd.