STC ST00719DE
FAA DRS lists ST00719DE as Current · Reissued, held by Sierra Nevada Corporation, for Cessna Aircraft 680. Recorded change: Installation of structural fittings in the wing as provisions to accommodate future external stores in accordance with Sierra Nevada Corporation Drawing List, Report No MDL-0142-25-9316, Revision A, dated February 15, 2011, FAA approved March 29, 2011, or later FAA approved revision. Snapshot dated June 30, 2026.
Recorded modification
What the FAA record covers
Installation of structural fittings in the wing as provisions to accommodate future external stores in accordance with Sierra Nevada Corporation Drawing List, Report No MDL-0142-25-9316, Revision A, dated February 15, 2011, FAA approved March 29, 2011, or later FAA approved revision.
ST00719DE identifies the approval, recorded holder, named aircraft, and modification scope. It does not confirm kit availability, serial-number effectivity, data rights, price, or installation authority.
Applicability
Aircraft named in FAA DRS
Named aircraft: Cessna Aircraft 680. Confirm the approved model list, serial effectivity, configuration, and certificate revision.
Buyer checks
Confirm before sourcing
- 01Does it cover the exact Cessna Aircraft 680 model, serial range, and configuration?
- 02Which configuration, loads, materials, inspections, and damage limits apply?
- 03Who can legally supply the design data, kit, instructions, and ICAs?
- 04What parts, labor, conformity, and return-to-service work are excluded?
Related aircraft structures STCs
Replace the Cameron Balloons US burner with Thunder & Colt (B2EU) and (B3EU)) Stratus double burner via standard burner frame gimbal block.
FAA holder: Cameron Balloons US
Installation of Powertech Electronic Powered Window Shades in accordance with Aerospace Technologies Group (ATG) Engineering Drawing List LIEDL30001, Revision A, Dated October 20, 2008, or later FAA approved revision.
FAA holder: Aerospace Technologies Group Inc.
a. Fuselage and wing Fatigue Life Expended (FLE) based on Quest s usage profile and recorded flight data. b. Fabrication and installation of the fuselage and wing identification placards in accordance with Quest Diagnostics document No.QDTBM-2010-007, Rev.A. c. The aircraft must be maintained in accordance with Section 6 (Instructions for Continued Airworthiness) of the Maintenance Plan for Continued Airworthiness, QDTBM-2010-006, Rev.A and dated June 13, 2011.
FAA holder: Quest Diagnostics
Installation of vortex generators on wing upper surfaces in accordance with J.V.E., Inc. Drawing List JVE-501, Revision IR, dated 01/05/96, and Installation Manual JVE-0596, Revision IR, dated 01/05/96, or later FAA approved revisions.
FAA holder: D'Shannon Products Ltd.