Aircraft STC directory
Air Tractor AT-301 STCs
The cited FAA DRS record snapshots contain 54 selected supplemental type certificates with status Current whose public applicability data names the Air Tractor AT-301. Use it to identify modification scope and recorded holders—not to determine serial-number effectivity, compatibility, installation approval, or commercial availability.
Modification demand surface
Recorded holders
Recently revised AT-301 STCs
Showing the 54 most recently revised records. Each entry links to the FAA source and separates public approval data from private commercial claims.
Application of fabric and polyurethane finishing system.
FAA holder: Shady Aviation LLC
Installation of secondary voltage indication system.
FAA holder: Visual Instruments LLC
Remove original cloth covering and install Ceconite covering.
FAA holder: Ceconite Division of Poly-Fiber Inc.
Installation of a Lever Throttle Quadrant.
FAA holder: Kawak Aviation Technologies Inc
The HIPEC Covering and Finishing System must be performed and maintained.
FAA holder: HIPEC Aircraft Coatings Inc.
Installation and maintenance of Oratex 6000 Covering and Coating System.
FAA holder: Lanitz-Prena Folien Factory GmbH
Installation of the Flight Grip Model 135 Control Stick Grip.
FAA holder: Air Products & Parts LLC
Installation of a SkyTrax100B UAT receiver.
FAA holder: Avidyne Corporation
Installation of Airwolf Filter Corp. Air Oil Separator.
FAA holder: Airwolf Filter Corporation
Installation of Gustin Aviation chip detector light system.
FAA holder: A & L Aircraft Parts Inc
Fabrication and installation of new or replacement of existing instrument panel lights dimmer control.
FAA holder: Seaton Engineering Corp.
Fabrication and installation of Landing Light Controller.
FAA holder: Seaton Engineering Corp.
Installation of Latitude Technologies Skynode S200 Satcom system must be performed.
FAA holder: Latitude Technologies Corporation
Installation of a Cable Cutter System on the Main Landing Gear.
FAA holder: Hershey Flying Service Inc
Installation of Cooper Superflite 102 Fabric.
FAA holder: Aviation Products Systems Inc.
Installation of winglets.
FAA holder: Aero Spraying Service Inc.
Installation of Electronics International Inc. Glass Panel Engine Monitor (with In Flight Data) CGR-30P.
FAA holder: Electronics International Inc.
Installation of Rotary Gatekeeper and provisions equipment.
FAA holder: Turbine Conversions Ltd
Installation of Electronics International Inc. Glass Panel Engine Monitor (with In-Flight Data) CGR-30C.
FAA holder: Electronics International Inc.
Installation of Vortex Generators on the wings.
FAA holder: Micro AeroDynamics Inc
Installation of EGT 701 series fuel flow instrument.
FAA holder: J P Instruments
Installation of J.P. Instruments (JPI) fuel flow indicating system.
FAA holder: J P Instruments
Installation of freon air conditioning unit (wind-driven compressor).
FAA holder: Collins Aircraft Dynamics Inc
Replace front 30 inches of fiberglass canopy top with L.P. Aero Plastics Inc. acrylic top in accordance with Reabe Aircraft Improvement Inc. Installation Instructions as listed on AML No. SA00770CH, amended January 14, 2011, or later FAA approved revisions.
FAA holder: Reabe Aircraft Improvement Inc
Installation of fuel flow/pressure instruments. (W/TSIO-360-MB1).
FAA holder: Electronics International Inc.
Installation of a Time Trac Data Recorder.
FAA holder: P2 Incorporated
Installation of Electronics International digital volt/amp gauges and accessories.
FAA holder: Electronics International Inc.
Installation of Electronics International Inc. Glass Panel Engine Monitor (with In-Flight Data) MVP-50P.
FAA holder: Electronics International Inc.
Installation of Pacific Propeller Inc 22D40/AG200-2 and 12D40/AG100-2 propellers, governors, and associated systems.
FAA holder: Pacific Propeller International LLC
Installation of Pheromone aerial application system. (AT-400A RESTRICTED CATEGORY).
FAA holder: Herculite Products Inc
Replacement of 12 refrigerant in air conditioning system with Enviro Refrigerant Hotshot R414B.
FAA holder: Scale Modelbuilders Inc.
Installation of Pacific Propellers EAC-12D40-425/AG-100-4S or EAC-22D40/AG-200-4S propeller assemblies using P&W 600 hp R-1340-S1H series engines.
FAA holder: Pacific Propeller International LLC
Installation of fiberglass covering. (M-62 SERIES PT-19) (G-73 SCHWEIZER).
FAA holder: Razorback Fabrics Inc
Installation of a Model 6 Automatic Flagman dispensor system on the upper surface of the right wing root.
FAA holder: Automatic Flagman Company
Installation of Poly-Fiber covering material.
FAA holder: Poly-Fiber Inc.
Installation of Goodyear 29X11-10, 8 ply or 10 ply tires and 8.50X10 tubes.
FAA holder: Reabe Aircraft Improvement Inc
Installation of M-20 Oil Separator, model 600-WP.
FAA holder: M-20 Oil Separators LLC
Installation of an electronic digital engine tachometer horizon model P-1000.
FAA holder: Horizon Instruments Inc