FAA STC category
Landing gear and brakes STCs
Landing gear, brake, wheel, tire, skid, and undercarriage changes. This directory contains 568 selected records listed with status Current in their cited FAA DRS snapshots and links every entry to its source.
Installation of fully enclosed main landing gear door system for high-flotation- gear-equipped aircraft.
FAA holder: Raisbeck Engineering Inc.
Installation to enlarge the existing main landing gear over-wing access hole in the upper wing skin.
FAA holder: M2 Aviation Soultions LLC
Installation of a High Skid Cross Tube Landing Gear.
FAA holder: McDermott Aviation 214 Holdings, LLC
Installation of landing gear harnesses.
FAA holder: Aereos Repairs LLC
Installation of Wheel and Brake Assemblies.
FAA holder: Game Aerospace LLC
Installation of replacement skid tubes.
FAA holder: Bell Helicopter Textron Inc.
Installation of the Meggitt Wireless Tire Pressure Sensor.
FAA holder: 3S Certification LLC
Installation of aluminum and fiberglass wheel covers.
FAA holder: Premiere-Aviation Inc.
Attach a casting to the landing gear fuselage attach angles just above main landing gear legs.
FAA holder: McFarlane Aviation LLC
Installation of a left side bubble window and a modified left side main landing gear fairing.
FAA holder: Aerocraft Incorporated
Installation of main landing gear spotlights.
FAA holder: The Boeing Company
Installation to enlarge the existing main landing gear over-wing access in the upper wing skin.
FAA holder: M2 Aviation Solutions LLC.
Installation of the Grove Disk Brake System.
FAA holder: Grove Aircraft Landing Gear Systems Inc.
Installation of titanium main landing gear assembly.
FAA holder: Mr. Thomas Anderson
Installation of Alternate Main Landing Gear Tires, Michelin P/N 026-335-0.
FAA holder: Metrea Special Aerospace ISR Inc.
Installation of Alternate Main Landing Gear Tires, Michelin P/N 026-335-0.
FAA holder: Metrea Special Aerospace ISR Inc.
Replace the o-ring seals in the landing gear lower strut seal.
FAA holder: Metrea Special Aerospace ISR Inc.
Replace the o-ring seals in the landing gear lower strut.
FAA holder: Metrea Special Aerospace ISR Inc.
Replacement of original O rings and backup rings from landing gear lower bearing and floating piston with Green Tweed, Inc. AGT seals.
FAA holder: Metrea Special Aerospace ISR Inc.
Installation of Main Landing Gear Wire Harness Assemblies.
FAA holder: NIACC Avitech Technologies
Manufacture of High Skid Landing Gear.
FAA holder: McDermott Aviation Ltd.
Installation of Acme Aero Shock landing gear shock absorbers.
FAA holder: Acme Suspensions LLC
Installation of Acme Stinger tailwheel landing gear shock absorber.
FAA holder: Acme Suspensions LLC
Installation of Skid Shoes.
FAA holder: Airbus Helicopters Canada Limited
Replacement of fiberglass main landing gear legs with aluminum parts.
FAA holder: Helio Alaska Inc.
Repair scheme for main landing gear assemblies.
FAA holder: Helio Alaska Inc.
Installation of Airframes Alaska Brake Pedal and Master Cylinder Assembly.
FAA holder: Airframes Alaska LLC
Installation of Landing Gear Strut Data Collection System.
FAA holder: Mammoth Freighters LLC
Removal of landing gear and installation of seaplane conversion.
FAA holder: PC6-AU23 Spares LLC
Installation of flap actuated landing gear warning system.
FAA holder: Walter Timothy Miller
Installation of a flap actuated landing gear warning system.
FAA holder: Walter Timothy Miller
Installation of new main landing gear doors.
FAA holder: Raisbeck Engineering Inc.
Installation of Raisbeck fully enclosed main landing gear doors.
FAA holder: Raisbeck Engineering Inc.
Installation of fully enclosed main landing gear doors.
FAA holder: Raisbeck Engineering Inc.
Installation of fully enclosed main landing gear door system and associated actuation mechanism.
FAA holder: Raisbeck Engineering Inc.
Installation of fully enclosed main landing gear door system for high-flotation-gear-equipped aircraft.
FAA holder: Raisbeck Engineering Inc.
Installation of main landing gear door system for high flotation gear equipped aircraft.
FAA holder: Raisbeck Engineering Inc.
Installation of the nose tire scraper P/N TSL-100.
FAA holder: Aero Twin Inc.
Installation of main landing gear fairings.
FAA holder: Summit Aviation Inc
Installation of a ground intrusion detection system which consists of an external surveillance camera, sensors in the wheel wells to detect movement, and a VCR to record images.
FAA holder: L3Harris Technologies Integrated Systems L.P.
Installation of elevator trim wheel assembly in place of the type certificated trim wheel assembly in accordance with QMI, Inc. Trim Wheel Installation Instructions for Cessna 180, Early 182, and 185 Aircraft, Rev Level A, dated November 1, 2019, or later FAA approved revision.
FAA holder: McFarlane Aviation LLC
Installation of alternate electro-hydraulic power pack system for operation of main wheel skis.
FAA holder: F.Atlee Dodge Aircraft Services
Installation of Wipaire Skis Main Wheel Skis Model C2200.
FAA holder: F.Atlee Dodge Aircraft Services
Installation of Wipaire Skis Inc. Model AWB2500A (Aircraft Skis) (FluiDyne) (Federal) Main and AWN1200 Nose Wheel skis.
FAA holder: F.Atlee Dodge Aircraft Services
Installation of Wipaire Skis Inc. Model AWB2500A (Aircraft Skis) (FluiDyne) (Federal) Main and Model AWN1200 Nose Wheel skis.
FAA holder: F.Atlee Dodge Aircraft Services
Installation of Model C-2200 main skis and Model AWT-2500 or AWT-2500A tail wheel skis.
FAA holder: F.Atlee Dodge Aircraft Services
Installation of C-3000 main ski and AWN-1200 nose wheel ski.
FAA holder: F.Atlee Dodge Aircraft Services
Installation of Wipaire Skis Model C-2200 main ski and Model AWT-2500 or AWT-2500A tail wheel skis.
FAA holder: F.Atlee Dodge Aircraft Services
Installation of Wipaire Skis Model C-2200 main skis and Model AWT-2500 or AWT-2500A tail wheel ski.
FAA holder: F.Atlee Dodge Aircraft Services
Installation of Wipaire Skis Model C-2200 main and Model CTF-2200 tail wheel skis.
FAA holder: F.Atlee Dodge Aircraft Services
Installation of Wipaire Skis Model C-2200 main and Model CTF-2200 tail wheel skis.
FAA holder: F.Atlee Dodge Aircraft Services
Installation of Wipaire Skis Model A2000A main wheel replacement ski.
FAA holder: F.Atlee Dodge Aircraft Services
Installation of model AWB-2500A(aircraft skis) main and AWN-1200 nose wheel-skis.
FAA holder: ee Dodge Aircraft Services
Installation of Model C-2200 main main and AWN1200A nose wheel skis.
FAA holder: F.Atlee Dodge Aircraft Services
Installation of Model C2200 main ski and AWN-1200A nose wheel ski.
FAA holder: F.Atlee Dodge Aircraft Services
Installation of Wipaire Skis Inc. Model 2500 (Aircraft Skis) (FluiDyne) Wheel skis.
FAA holder: F.Atlee Dodge Aircraft Services
Installation of Wipaire Skis (Fluidyne Engineering Corporation) Main Wheel Skis Model C3000A.
FAA holder: F.Atlee Dodge Aircraft Services
Installation of an EMTEQ/ACS-NAI Nose Landing Gear Tow Guard.
FAA holder: Woven Electronics LLC
Installation of main landing gear fairings.
FAA holder: Whelen Aerospace Technologies
Installation of main landing gear fairings.
FAA holder: Whelen Aerospace Technologies
Installation of 'speed spats' main landing gear fairings.
FAA holder: Whelen Aerospace Technologies
Installation of main landing gear fairings.
FAA holder: Whelen Aerospace Technologies
Installation of main landing gear fairings.
FAA holder: Whelen Aerospace Technologies
Install Aircraft Wheel and Brake CONVERSION Kit 199-92, N/C.
FAA holder: KAMAN Corporation Aircraft Wheel and Brake LLC
Addition of low drag main landing gear fairings.
FAA holder: Curry Aviation LLC
Main Wheel and Brake Assembly for the Viking Air DHC-6 Series aircraft.
FAA holder: PMA Design and Manufacturing
Installation of Parker Hannifin Wheel/Brake Assembly P/N 40-424/30-244 (conversion kit no. 199-241).
FAA holder: KAMAN Corporation Aircraft Wheel and Brake LLC
Installation of Parker Hannifin Corporation, Aircraft Wheel & Brake Division 199-282 Conversion Kit for main wheels and brakes.
FAA holder: Kaman Corporation Aircraft Wheel and Brake LLC
Install Aircraft Wheel & Brake Conversion Kit 199-150, N/C.
FAA holder: Kaman Corporation Aircraft Wheel and Brake LLC
Replace existing nose wheel with Cleveland nose wheel P/N 40-204.
FAA holder: KAMAN Corporation Aircraft Wheel and Brake LLC
Replace existing nose wheel with Cleveland nose wheel P/N 40-204.
FAA holder: KAMAN Corporation Aircraft Wheel and Brake LLC
Install Cleveland wheel P/N 40-46 Rev. K and brake P/N 30-31, Rev. L.
FAA holder: Kaman Corporation Aircraft Wheel and Brake LLC
Replace existing nose wheel with Cleveland nose wheel P/N 40-204by installing Parker Hannifin conversion kit 199-126.
FAA holder: KAMAN Corporation Aircraft Wheel and Brake LLC
Installation of Cleveland wheel No. 40-97A and brake No. 30-63A.
FAA holder: Kaman Corporation Aircraft Wheel & Brake LLC
Installation of wheel and brake assemblies and axle spacer.
FAA holder: Kaman Corporation Aircraft Wheel and Brake LLC
Install Cleveland Acft Products wheel and brake conversion kit, P/N 199-51.
FAA holder: Kaman Corporation Aircraft Wheel and Brake LLC