Aircraft STC directory
Air Tractor AT-402 STCs
The Jun 30, 2026 FAA DRS snapshot contains 59 selected supplemental type certificates with status Current whose public applicability data names the Air Tractor AT-402. Use it to identify modification scope and recorded holders—not to determine serial-number effectivity, compatibility, installation approval, or commercial availability.
Modification demand surface
Recorded holders
Recently revised AT-402 STCs
Showing the 59 most recently revised records. Each entry links to the FAA source and separates public approval data from private commercial claims.
Installation of a digital payload hopper quantity and spray boom pressure indicating system.
FAA holder: Reabe Design LLC
Installation of the Avia Propeller Ltd. model V508H/108/A propeller.
FAA holder: MT-Propeller Entwicklung GmbH
Installation of L-3 Communications Avionics Systems.
FAA holder: Acron Aviation Inc.
Installation of L-3 GENESIS (TM) Electronic Standby Instrument System (ESI-500/MAG-500).
FAA holder: Acron Aviation Inc.
Installation of secondary voltage indication system.
FAA holder: Visual Instruments LLC
Spray System Installation. See attached FAA Approved Model List (AML) SA01995WI for required data.
FAA holder: Aeronautix, LLC
Installation of AeroLED's Holdings, LLC., position lights, navigation lights, strobe lights and beacon lights.
FAA holder: AeroLED's Holdings, LLC
Installation of a True Quantity Gauge System.
FAA holder: Reabe Design LLC
Installation of a Hydraulic Actuator and Auger.
FAA holder: Texas Transland LLC
Installation of a Reabe Aircraft Improvement Power Gate Control System.
FAA holder: Reabe Design LLC
Fabrication and installation of the Fuel Flow Monitoring System.
FAA holder: DV Aviation Inc.
Installation of a Lever Throttle Quadrant.
FAA holder: Kawak Aviation Technologies Inc
Approval of the L-3 Communications NGT 9000/9000R ADS-B system installed.
FAA holder: ADS-B Technologies LLC
Installation of a Supplemental Lighting System.
FAA holder: Aviation Specialties Unlimited Inc.
Installation of a Garmin transponders: (a) GTX 330/330D/33/33D with ADS-B Out functionality; (b) GTX 335/335R/345/345R with ADS-B Out and In functionality; or (c) GTX 335R/345R with ADS-B Out functionality in select airplanes installed with G950/G1000 systems.
FAA holder: Garmin International Inc
Fabrication and installation of new or replacement of existing instrument panel lights dimmer control.
FAA holder: Seaton Engineering Corp.
Fabrication and installation of Landing Light Controller.
FAA holder: Seaton Engineering Corp.
Installation of Garmin GTN 6XX/7XX Navigation System.
FAA holder: Garmin International Inc
Installation of Garmin GTN 6XX/7XX Navigation System.
FAA holder: Garmin International Inc
Installation of Electronics International Inc. Glass Panel Engine Monitor (with In-Flight Data).
FAA holder: Electronics International Inc.
Installation of Latitude Technologies Skynode S200 Satcom system.
FAA holder: Latitude Technologies Corporation
Installation of J.P. Instruments (JPI) Primary Engine Data Management System.
FAA holder: J. P. Instruments
Installation of a ground single point fueling system.
FAA holder: Turbine Conversions Ltd
Installation of the Flight Data Acquisition Storage and Transmission System (Fast).
FAA holder: Amtech Aeronautical Limited
Installation of a replacement airframe fuel pump in accordance with Cascade Flying Service Master Drawing List FW-CFS545-90, Rev. B, dated October 19, 2011, or later FAA approved revision.
FAA holder: Cascade Aircraft conversions LLC
Installation of a Cable Cutter System on the Main Landing Gear.
FAA holder: Hershey Flying Service Inc
Installation of a Center Windshield.
FAA holder: Hershey Flying Services
Installation of Globalstar Antenna and Cradle provisions to support a Globalstar GPS-1700 in non-composite airplanes.
FAA holder: Avidyne Corporation
Installation of AMSAFE Aviation Inflatable Restraints.
FAA holder: AMSAFE Inc.
Installation of Garmin GDL 88 ADS-B UAT Transceiver System.
FAA holder: Garmin International Inc
Installation of a Hartzell Propeller model .HC-B4TN-3C/T10702NS (4 Blade).
FAA holder: Aero Innovations LLC
Approval of the L-3 Communications NGT 2000/2500 ADS-B system.
FAA holder: ADS-B Technologies, LLC
Installation of winglets.
FAA holder: Aero Spraying Service Inc.
Installation of Challenger Reusable Air Filter.
FAA holder: Challenger Aviation Products Inc.
Installation of Rotary Gatekeeper and provisions equipment.
FAA holder: Turbine Conversions Ltd
Installation of Vortex Generators on the wings.
FAA holder: Micro AeroDynamics Inc
Installation of EGT 701 series fuel flow instrument.
FAA holder: J P Instruments
Installation of J.P. Instruments (JPI) fuel flow indicating system.
FAA holder: J P Instruments
Installation of a Trace Engines, LP OE600A model engine, McCauley 3FF34C529/106AW[X]-0 model propeller and associated systems.
FAA holder: Trace Engines LP
Installation of the E-Tec ET-107 System that uses a sequential 24V to 48V Fast Start in order to reduce turbine exhaust gas temperatures (EGT) during engine starts.
FAA holder: Air Repair Inc
Installation of a Cool Start System in accordance with Installation Instructions , Revision A, dated April 14, 2011, or later FAA Approved revision.
FAA holder: Turbine Conversions Ltd
Installation of an improved cowling, air inlet and filtration system.
FAA holder: Turbine Conversions Ltd
Replace front 30 inches of fiberglass canopy top with L.P. Aero Plastics Inc. acrylic top in accordance with Reabe Aircraft Improvement Inc. Installation Instructions as listed on AML No. SA00770CH, amended January 14, 2011, or later FAA approved revisions.
FAA holder: Reabe Aircraft Improvement Inc
Installation electrostatic spray equipment and controls in accordance with ZEE Systems, Inc. Document Number Z03-1 MDL-MDI, Revision D, dated 10-22-10; Airplane Flight Manual Supplement Document Number Z03-AFMS, Rev IR dated 12/27/2010; Instructions for Continued Airworthiness (ICA), Z03K000, Rev IR, dated 11-15-10, or later FAA approved revision are a required part of this modification.
FAA holder: Spectrum Electrostatic Sprayers Inc.
Installation of fuel flow/pressure instruments. (W/TSIO-360-MB1).
FAA holder: Electronics International Inc.
Installation of a Time Trac Data Recorder.
FAA holder: P2 Incorporated
Installation of Electronics International digital volt/amp gauges and accessories.
FAA holder: Electronics International Inc.
Precise Flight Inc. Pulselite Control System.
FAA holder: Precise Flight Inc
Installation of hydraulically driven material dispersal gate for fire fighting applications.
FAA holder: Turbine Conversions Ltd
Installation of Pratt & Whitney Engine Services, Inc. Aircraft Data Acquisition System ADAS+, P/N ADAS-K-010.
FAA holder: Pratt & Whitney Engine Services Inc.
Installation of a Powered Hopper Lid and Auger System.
FAA holder: Reabe Design LLC
Replacement of 12 refrigerant in air conditioning system with Enviro Refrigerant Hotshot R414B.
FAA holder: Scale Modelbuilders Inc.
Installation of the Automatic Flagman Dispenser Models in accordance with Automatic Flagman Master Drawing Lists specified in attached AML, or later FAA approved revision.This STC supercedes several existing STC s as listed in the notes on the attached AML.
FAA holder: R-S Sales Inc.
Installation of Walter M601E-11 model turbine engine and an AVIA Propeller Limited VJ8.510 or VJ8.510AG propeller system or Hartzell HC-B3TW-3/T10282NS+4 model propeller.
FAA holder: Turbine Conversions Ltd
Installation of automatic flagman Model 4 dispensor system on the upper surface of the right wing root.
FAA holder: R-S Sales Inc.