Aircraft STC directory
MD Helicopter 369F STCs
The Jun 30, 2026 FAA DRS snapshot contains 69 selected supplemental type certificates with status Current whose public applicability data names the MD Helicopter 369F. Use it to identify modification scope and recorded holders—not to determine serial-number effectivity, compatibility, installation approval, or commercial availability.
Modification demand surface
Recorded holders
Recently revised 369F STCs
Showing the 69 most recently revised records. Each entry links to the FAA source and separates public approval data from private commercial claims.
Installation of an Isolair Model3700-110 spray tank system. (500N restricted category).
FAA holder: Isolair Inc.
Installation of right-side utility mount.
FAA holder: Airfilm Camera Systems LLC
Installation of left-side utility mount.
FAA holder: Airfilm Camera Systems LLC
Installation of aft belly utility mount.
FAA holder: Airfilm Camera Systems LLC
Installation of external pod, camera mount, and 12 volt power provision.
FAA holder: Dart Aerospace USA Inc.
Installation of Garmin GTN 6XX/7XX Navigation System.
FAA holder: Garmin International Inc.
Installation of pneumatic door actuators.
FAA holder: Dart Aerospace USA Inc.
Installation of two underfuselage jacking hard points.
FAA holder: Dart Aerospace USA Inc.
Installation of laser mapping system.
FAA holder: Dart Aerospace USA Inc.
Installation of Human External Cargo (HEC) Long-Line Kit.
FAA holder: Boost Human External Cargo Systems Inc.
Fabrication of Onboard Systems Model 200-034-00, 200-034-01, and 200-034-02 Load Weigh Kits.
FAA holder: Onboard Systems International
Fabrication of Onboard Systems Model 200-187-00 cargo hook kit.
FAA holder: Onboard Systems International LLC
Fabrication of Onboard Systems Model 200-231-00 and 200-231-01 Cargo Hook Attach Point Kit and installation of these Cargo Hook Attach Point Kits.
FAA holder: Onboard Systems International
Fabrication of Onboard Systems International Model 200-264-00, 200-264-01, and 200-264-02 Cargo Hook Kits.
FAA holder: Onboard Systems International
Installation of air conditioning system.
FAA holder: Fargo Manufacturing Co.
Installation of belly-mounted, cargo carrier.
FAA holder: Fargo Manufacturing Co.
Installation of Fargo 19-gallon auxiliary fuel tank with STC SH656GL.
FAA holder: Fargo Manufacturing Co.
Replacement of door glass with sliding window.
FAA holder: The NORDAM Group LLC
Installation of an SX-16 Nightsun searchlight on a forward quick mount kit.
FAA holder: Bell Helicopter Textron Inc.
Installation of a passenger door window.
FAA holder: Bell Helicopter Textron Inc.
Installation of windshield.
FAA holder: Bell Helicopter Textron Inc.
Installation of Heli-Plex P/N39HP913 windshield assembly.
FAA holder: Bell Helicopter Textron Inc.
Installation of an Inframetrics Model IRTV-445 FLIR on a forward quick mount kit.
FAA holder: Bell Helicopter Textron Inc.
Installation of an Istec/Wescam Model 104/12 camera on a forward quick mount kit.
FAA holder: Bell Helicopter Textron Inc.
Manufacture of Nightscanner searchlight kit.
FAA holder: Bell Helicopter Textron Inc.
Installation of rain gutters over pilot and passenger doors.
FAA holder: Bell Helicopter Textron Inc.
Installation of SX-5 searchlight on a forward quick-mount kit.
FAA holder: Bell Helicopter Textron Inc.
Installation of automatic door openers.
FAA holder: Bell Helicopter Textron Inc.
Installation of slide window assembly in pilot and passenger door.
FAA holder: Bell Helicopter Textron Inc.
Installation of a crew door window.
FAA holder: Bell Helicopter Textron Inc.
Remove existing fuel cap locks and replace with Aeronautical Acessories locking fuel cap assembly, P/N 500-281-001.
FAA holder: Bell Helicopter Textron Inc.
Installation of Spectrolab SX-16C nightsun searchlight.
FAA holder: Gerbino Flight Systems
Installation of a P.A. speaker kit.
FAA holder: Allen J Gerbino, Gerbino Flight Systems
Installation of quick removal door hinges.
FAA holder: Gerbino Flight Systems
Installation of VIP single passenger seats.
FAA holder: Gerbino Flight Systems
Installation of replacement windshield and windows.
FAA holder: Bell Helicopter Textron Inc.
Installation of range extension fuel tank in cargo area.
FAA holder: ROBERTSON FUEL SYSTEMS LLC
Installation of Garmin Model 400W / 500W Series GPS-WAAS Navigation System.
FAA holder: Garmin AT Inc.
Installation of a Teledyne-Gill P/N G-641 lead acid battery.
FAA holder: Rolls-Royce Engine Services-Oakland Inc.
Installation of Aviation Development Corporation oil filter.
FAA holder: Aviation Development Corporation
Installation of expanded lateral center of gravity kit.
FAA holder: Winco Inc.
Fabrication of the Winco Side Pull Handle Assembly per Drawing No. W002, Revision N/C, dated December 13, 2002, or later FAA-approved revision, and the Hook Link Assembly, Part No. 369SP-200, per Colorado Helicopters Drawing No. 369SP-200, Revision C, dated September 11, 1991, or later FAA-approved revision; and installation and maintenance of this system.
FAA holder: Winco Inc.
Installation of a wire strike protection system.
FAA holder: Bristol Aerospace Ltd
Installation of side pull hook assembly.
FAA holder: Colorado Helicopters Inc
Installation of external cargo rack and work platform between the skid gears.
FAA holder: Haverfield International
Installation of an Airborne Workstation.
FAA holder: Haverfield International
Installation of a Pratt & Whitney Engine Services, Inc. Health Usage Monitoring System (HUMS) Model 1122, P/N HUMS-A-070-1.
FAA holder: Pratt & Whitney Engine Services Inc.
Installation of an enlarged instrument panel and back lighted instrument overlay.
FAA holder: Heritage Aviation Ltd
Installation of Fibre Reinforced Plastic Interior Trim Panels and Ducting.
FAA holder: Prism Helicopters Ltd
Installation of Apical emergency float kit, p/n 20491.
FAA holder: Apical Industries Inc
Installation of an electronic weighing system, for monitoring cargo hook weight, in accordance with Measurement Systems International, Inc., Installation drawing No. D00327, Sheets 1 and 2, or Drawing D00473, Rev. E.
FAA holder: Measurement Systems Intl Inc
Installation of seat access panel in accordance with ALM Technologies, Inc., Drawing List, Document No. 3698001, dated August 21, 1987, or later FAA approved revision.
FAA holder: Enviro Systems Inc.
Installation of Teledyne Battery Products G-641 and G-641S lead-acid battery.
FAA holder: Teledyne Battery Products
Installation of Concorde RG500 battery in accordance with Aero-Jet Trading 'Installation Instructions Concorde Battery Hughes 500 & MD369 Series Helicopter' Manual Number AJ-369, Revision New, dated May 18, 1999, or later FAA approved revision.
FAA holder: Advanced Power Products
Installation of a Pratt & Whitney Engine Services, Inc.-Honeywell IntelliStart Plus+TM Electronic Control System P/N DPU-K-010.
FAA holder: Pratt & Whitney Engine Services Inc.
Installation of Utility Equipment Kit consisting of Cargo Mirror, Bearpaws and Bubble or Wedge Door Windows.
FAA holder: Dart Aero Accessories, Inc
Installation of forward door and aft door bubble type windows.
FAA holder: Tech-Tool Plastics Inc
Installation of Aerometals tailboom, P/N 369X23500-505, 507; or installation of Yehnert tailboom P/N YH-228-X as replacements for MDHI tailboom P/N 369D23500-Y.
FAA holder: Aerometals
Installation of engine compressor inspection panel in accordance with Installation Instructions RDE 109-20, Rev A, dated 5/10/00, or later FAA approved revisions.
FAA holder: Dodds Robert L (RDE)
Installation of Aerometals Low Speed Actuator Assemblies, P/N 369X7014.
FAA holder: Aerometals
Installation of an auxiliary fuel tank in the aft passenger compartment.
FAA holder: Tower Aerospace, Inc