Aircraft STC directory
MD Helicopter 369HM STCs
The Jun 30, 2026 FAA DRS snapshot contains 84 selected supplemental type certificates with status Current whose public applicability data names the MD Helicopter 369HM. Use it to identify modification scope and recorded holders—not to determine serial-number effectivity, compatibility, installation approval, or commercial availability.
Modification demand surface
Recorded holders
Recently revised 369HM STCs
Showing the 84 most recently revised records. Each entry links to the FAA source and separates public approval data from private commercial claims.
Installation of right-side utility mount.
FAA holder: Airfilm Camera Systems LLC
Installation of left-side utility mount.
FAA holder: Airfilm Camera Systems LLC
Installation of aft belly utility mount.
FAA holder: Airfilm Camera Systems LLC
Installation of pneumatic door actuators.
FAA holder: Dart Aerospace USA Inc.
Installation of engine firewall in Hughes 369 model helicopter.
FAA holder: Thoroughbred Aviation Maintenance Inc
Fabrication of Onboard Systems Model 200-034-00, 200-034-01, and 200-034-02 Load Weigh Kits.
FAA holder: Onboard Systems International
Fabrication of Onboard Systems Model 200-187-00 cargo hook kit.
FAA holder: Onboard Systems International LLC
Fabrication of Onboard Systems International Model 200-264-00, 200-264-01, and 200-264-02 Cargo Hook Kits.
FAA holder: Onboard Systems International
Installation of the Automatic Flagman Model 135 Control Stick Grip.
FAA holder: Air Products & Parts LLC
Installation of belly-mounted cargo carrier.
FAA holder: Fargo Manufacturing Co.
Installation of a starter generator cooling system.
FAA holder: Fargo Manufacturing Co.
Installation of belly-mounted, cargo carrier.
FAA holder: Fargo Manufacturing Co.
Installation of Fargo 19-gallon auxiliary fuel tank with STC SH656GL.
FAA holder: Fargo Manufacturing Co.
Installation of Modified front window canopy.
FAA holder: The NORDAM Group LLC
Installation of an SX-16 Nightsun searchlight on a forward quick mount kit.
FAA holder: Bell Helicopter Textron Inc.
Installation of a passenger door window.
FAA holder: Bell Helicopter Textron Inc.
Installation of an Inframetrics Model IRTV-445 FLIR on a forward quick mount kit.
FAA holder: Bell Helicopter Textron Inc.
Installation of an Istec/Wescam Model 104/12 camera on a forward quick mount kit.
FAA holder: Bell Helicopter Textron Inc.
Manufacture of Nightscanner searchlight kit.
FAA holder: Bell Helicopter Textron Inc.
Installation of rain gutters over pilot and passenger doors.
FAA holder: Bell Helicopter Textron Inc.
Installation of SX-5 searchlight on a forward quick-mount kit.
FAA holder: Bell Helicopter Textron Inc.
Installation of automatic door openers.
FAA holder: Bell Helicopter Textron Inc.
Installation of slide window assembly in pilot and passenger door.
FAA holder: Bell Helicopter Textron Inc.
Installation of a crew door window.
FAA holder: Bell Helicopter Textron Inc.
Remove existing fuel cap locks and replace with Aeronautical Acessories locking fuel cap assembly, P/N 500-281-001.
FAA holder: Bell Helicopter Textron Inc.
Installation of Spectrolab SX-16C nightsun searchlight.
FAA holder: Gerbino Flight Systems
Installation of a P.A. speaker kit.
FAA holder: Allen J Gerbino, Gerbino Flight Systems
Installation of quick removal door hinges.
FAA holder: Gerbino Flight Systems
Installation of VIP single passenger seats.
FAA holder: Gerbino Flight Systems
Installation of replacement windshield and windows.
FAA holder: Bell Helicopter Textron Inc.
Installation of range extension fuel tank in cargo area.
FAA holder: ROBERTSON FUEL SYSTEMS LLC
Installation of generator kit No. 369-100.
FAA holder: Gulfstream-California Inc.
Installation of Aviation Development Corporation oil filter.
FAA holder: Aviation Development Corporation
Installation of a wire strike protection system.
FAA holder: Bristol Aerospace Ltd
Installation of APC starter- generator, P/N 150SG111Q, 150SG121Q, and 150SG124Q.
FAA holder: Shurka Aerospace Inc
Installation of a replacement main rotor blade, part number 500P2100-301 and 303.
FAA holder: Helicopter Technology Co
Installation of a Pratt & Whitney Engine Services, Inc. Health Usage Monitoring System (HUMS) Model 1122, P/N HUMS-A-070-1.
FAA holder: Pratt & Whitney Engine Services Inc.
Installation of Fibre Reinforced Plastic Interior Trim Panels and Ducting.
FAA holder: Prism Helicopters Ltd
Installation of Apical emergency float kit, p/n 20491.
FAA holder: Apical Industries Inc
Installation of Stainless Steel Skid shoes.
FAA holder: Papas Gary Los Angeles Laboratories Inc.
Installation of Teledyne Battery Products G-641 and G-641S lead-acid battery.
FAA holder: Teledyne Battery Products
Installation of a Pratt & Whitney Engine Services, Inc.-Honeywell IntelliStart Plus+TM Electronic Control System P/N DPU-K-010.
FAA holder: Pratt & Whitney Engine Services Inc.
Installation of Utility Equipment Kit consisting of Cargo Mirror, Bearpaws and Bubble or Wedge Door Windows.
FAA holder: Dart Aero Accessories, Inc
Installation of forward door and aft door bubble type windows.
FAA holder: Tech-Tool Plastics Inc
Installation of an auxiliary fuel tank in the aft passenger compartment.
FAA holder: Tower Aerospace, Inc
Installation of Apical utility float kit.
FAA holder: Apical Industries Inc
Installation of 36-inch main rotor blade leading edge abrasion strips.
FAA holder: Composite Technology, Inc