Skip to content

Aircraft STC directory

REVO Lake Model 250 STCs

The Jun 30, 2026 FAA DRS snapshot contains 17 selected supplemental type certificates with status Current whose public applicability data names the REVO Lake Model 250. Use it to identify modification scope and recorded holders—not to determine serial-number effectivity, compatibility, installation approval, or commercial availability.

17
listed Current at snapshot
10
holder directories
8
modification categories
Jun 13, 2024
latest recorded revision

Modification demand surface

Other aircraft modifications6
Fuel systems2
Engine and powerplant2
Cabin and interiors2
Aircraft connectivity2
Avionics1
Landing gear and brakes1
Propellers1

Recorded holders

Recently revised Lake Model 250 STCs

Showing the 17 most recently revised records. Each entry links to the FAA source and separates public approval data from private commercial claims.

SA970NEAircraft connectivity

Installation of wing filler for auxiliary fuel tanks, miscellaneous structural modifications and optional radome, dual alternator system, bow compartment covers, upper fin revision, disassembly provisions and dual rudder/aileron electric trim system in accordance with Aerofab, Inc. Drawing List 4-0001, Revision I, dated October 23, 1996, or later FAA-approved revision. The installation is applicable in the following configurations: United States of America Department of Transportation - Federal Aviation Administration Supplemental Type Certificate (Continuation Sheet) ___________________________________________________________________________________________________________________________________ Any alteration of this certificate is punishable by a fine of not exceeding $1,000, or imprisonment not exceeding 3 years, or both. ___________________________________________________________________________________________________________________________________ FAA Form 8110-2-1(10-69) PAGE 4 of 4 PAGES This certificate may be transferred in accordance with FAR 21.47. United States of America Department of Transportation -- Federal Aviation Administration Supplemental Type Certificate _____________________________________________________________________________________________________________________________________ Any alteration of this certificate is punishable by a fine of not exceeding $1,000, or imprisonment not exceeding 3 years, or both. _____________________________________________________________________________________________________________________________________ FAA Form 8110-2(10-68) PAGE 1 of 1 PAGES This certificate may be transferred in accordance with FAR 21.47. CONFIGURATION 1: Basic installation with aft seats installed in accordance with Configuration 1 of STC SA469NE. Optional items may be installed in any combination as follows: Option 1: Radome In accordance with drawings 150017, 190011, 190018 and 190019. Mass with an equivalent weight of 35 lbs. may be installed with a center of gravity no farther forward than 6.61 inches aft of bulkhead 190011-11, as defined in Aerofab, Inc. Engineering Report 4-250-2, dated November 4, 1991, and drawing 190019. This STC does not approve the installation of a radar, antenna, wave guide or transmitter, nor radar/radome system compatibility. Option 2: Dual Alternator System In accordance with drawings 4-7781 and 4-7782. Option 3: Bow Compartment Covers In accordance with drawing 4-3501. Option 4: Upper Fin Revision In accordance with drawing 4-2652, Revision C. Option 5: Disassembly Provisions In accordance with drawing 300015. Option 6: Dual Rudder/Aileron Electric Trim System In accordance with drawing 4-3519 and STC SA1142SO. CONFIGURATION 2: Same as Configuration 1 except aft sets installed in accordance with Configuration 2 of STC SA469NE and aft seat weight restriction placard installed in accordance with drawing 4-7003.

FAA holder: Revo Inc

View record