FAA STC category
Cabin and interiors STCs
Seating, cabin arrangement, galley, lavatory, entertainment, and interior changes. This directory contains 4,853 selected records listed with their cited source statuses in their cited FAA DRS snapshots and links every entry to its source.
Installation of an Interior Reconfiguration.
FAA holder: Jamco Aero Design and Engineering Pte Ltd
Conversion of Divan Seating to four places will be performed.
FAA holder: Bombardier Inc
Installation of an aft lavatory reconfiguration.
FAA holder: B/E Aerospace Inc - FSI
Installation of electronic consoles on cabin seat rails.
FAA holder: Avcon Industries, Inc
Fabrication and Installation of rear seat shoulder harnesses.
FAA holder: Dart Aerospace USA Inc.
Installation of Lavatory A on A330 Passenger to Freighter.
FAA holder: ELBE Flugzeugwerke GmbH
Installation of Airbus LiTeMood Cabin Lighting Upgrade.
FAA holder: STG Aerospace Ltd Brecon House, william Brown Close
Installation of an Interior Reconfiguration.
FAA holder: Jamco Aero Design and Engineering Pte Ltd
Operation with the left-hand and/or right-hand aft/side cabin doors removed.
FAA holder: Airbus Helicopters Canada Limited
Installation of the Mission Interior on a Hawker Beechcraft Corp. King Air B300/B300C Series Aircraft.
FAA holder: Sierra Nevada Corporation/Integrated Mission Systems
Installation of Passenger In-Seat Power System.
FAA holder: Chippewa Aerospace Inc
Installation of a VVIP Cabin Interior.
FAA holder: StandardAero Business Aviation Services, LLC
Installation of Galley A4 and Galley F3.
FAA holder: Airworthy Cabins Solutioins, LLC
Restricting the aircraft to six (6) seats (2 at 95, 2 at 132, 2 at 195, *1 at 242) for operation under 14 CFR Part 68 (BasicMed). * - Optional potty seat is exempt from this requirement, providing that it is placarded THIS SEAT NOT TO BE OCCUPIED FOR TAXI, TAKE-OFF OR LANDING.
FAA holder: Avpro Technical Services LLC
Installation of stowage boxes into an existing galley.
FAA holder: Driessen Aircraft Interior Systems, Inc DBA Zodiac Galleys USA Inc
Installation of 278 (18BC/68PY/192EY) Passenger Seating Arrangement.
FAA holder: AAR Engineering Services
Installation of an Executive Cabin Interior.
FAA holder: Comlux America LLC
Installation of the Replacement Hammock Seat Support.
FAA holder: Sealand Aviation Ltd
Installation of a cabin interior.
FAA holder: Southern Aviation Parts and Services
Modification of a existing approved interior configuration.
FAA holder: LMI Aerospace
Modification of an existing approved interior configuration.
FAA holder: LMI Aerospace
Installation of a passenger seating arrangement.
FAA holder: LMI Aerospace
Modification of an existing approved Interior Configuration.
FAA holder: LMI Aerospace
Installation of a Passenger Seating Arrangement.
FAA holder: LMI Aerospace
Installation of a video entertainment system.
FAA holder: LMI Aerospace
737-800 Slimline Lavatory and Economy Class Seat Modification (HIC Compliant).
FAA holder: United Airlines Inc
Installation of an Executive Style Interior for 737-8LZ.
FAA holder: Bizjet International Sales & Support Inc
Install passenger cabin upgrade.
FAA holder: Global Aerospace Design Corp.
Installation of an executive interior.
FAA holder: Bizjet International Sales & Support Inc
Modification of Short Brothers SD3-60 Sherpa to include incorporation of OEM static line and support structure, paratroop door modification, seating configuration, door edge protector and battery vent tube.
FAA holder: U.S. Department of Agriculture--Forest Service
Installation of Panasonic In-Flight Entertainment System.
FAA holder: Delta Engineering Corporation
Installation of a Bleed Air System for cabin heat and de-icing system pneumatic service.
FAA holder: Pen Turbo Aviation, Inc
Interior Reconfiguration on Boeing Model 777-300ER series airplanes.
FAA holder: B/E Aerospace Inc - FSI
Installation of Door 2 Galley Interior Reconfiguration.
FAA holder: Elisen & Associes Inc
Installation of an Airplane Interior - Medevac.
FAA holder: Gulfstream Aerospace Corporation
Front seat shoulder harness/lap belt assembly installation.
FAA holder: Alpha Aviation Inc
Installation of Max Pilot View Kit consisting of a new RH 'bubble' door with a larger transparent area, a new 'bow' shaped floor structure which the door conforms to, a floor viewing aperture outboard of the RH pilot's seat and a corresponding transparent section in the underlying fairing,.
FAA holder: GVH Aerospace Limited
Installation of Cabin Interior Noise Reduction System.
FAA holder: N2 Development, Inc.
Reconfiguration of cabin floor plan.
FAA holder: StandardAero Business Aviation Services LLC
Installation of VIP Cabin Interior Completion.
FAA holder: Lufthansa Technik AG
Installation of Emergency Medical Services Interior and Systems.
FAA holder: Air Methods Corporation
Installation of a Cabin Interior Reconfiguration.
FAA holder: Delta Engineering Corporation
Reconfiguration of the cabin floor plan arrangement.
FAA holder: StandardAero Business Aviation Services, LLC
Reconfiguration of the cabin floor plan arrangement.
FAA holder: StandardAero Business Aviation Services, LLC
Economy Class Cabin refresh to include revising the seating configuration from 9 to 10 abreast seats, rework of the passenger service units, installation of new class dividers, installation of new in-flight entertainment, refresh of all partitions, monument/partition/stowage refresh and installation of new floor coverings.
FAA holder: Northwest Aerospace Technologies Inc
Installation of a Wireless In-Flight Entertainment (IFE) System.
FAA holder: Astronics Armstrong Aerospace
Installation of Structural and Electrical provisions for a Panasonic in-flight entertainment (IFE) television (TV) monitor into a B747-400 crew rest compartment in accordance with TAECO GA Aviation Services LLC Master Drawing List MDL251BC0001, Revision P, dated June 26, 2008, or later Federal Aviation Administration (FAA) approved revision.
FAA holder: VT DRB Aviation Consultants
Reconfiguration of an existing interior layout for odel MD-11.
FAA holder: VT DRB Aviation Consultants
Installation of an Executive Interior and Reduction in Maximum Zero Fuel Weight form 28,814 to 28,279 pounds.
FAA holder: VT DRB Aviation Consultants
Installation of an interior reconfiguration from a 2-class configuration to an all economy class configuration.
FAA holder: VT DRB Aviation Consultants
Re-configuration of the cabin interior in accordance with Data List DL1797M00, Revision E, dated October 19, 2011 or later FAA approved revision. Airplane Flight Manual Supplement 1797R25C03, Revision IR, dated October 18, 2011 or later FAA approved revision is required.
FAA holder: VT DRB Aviation Consultants
Installation of an interior reconfiguration to be operated as part of an Air Canada Leisure Carrier Fleet.
FAA holder: VT DRB Aviation Consultants
Installation of an interior reconfiguration to be operated as part of an Air Canada Leisure Carrier Fleet.
FAA holder: VT DRB Aviation Consultants
Installation of an interior reconfiguration from JAL "international" to "domestic" configuration.
FAA holder: VT DRB Aviation Consultants
Installation of an interior reconfiguration from 170 passengers to 189.
FAA holder: VT DRB Aviation Consultants
Installation of an executive style interior.
FAA holder: VT DRB Aviation Consultants
Installation of a "Group P" interior configuration.
FAA holder: VT DRB Aviation Consultants
Reconfiguration of cabin interior.
FAA holder: VT DRB Aviation Consultants
One-time installation of an executive interior.
FAA holder: VT DRB Aviation Consultants
Installation of cabinetry on the airplane seat tracks.
FAA holder: Textron Aviation Inc.
Installation of a refreshment/entertainment cabinet (structural provisions only).
FAA holder: Textron Aviation Inc.
Installation of refreshment/ entertainment cabinets (structural provisions only).
FAA holder: Textron Aviation Inc.
Installation of an Auxiliary Table in the main deck door 2 galley complex.
FAA holder: Textron Aviation Inc.
Replace cabin door with cargo door.
FAA holder: Intercontinental Jet Service Corporation
Replace cabin door with cargo door.
FAA holder: Intercontinental Jet Service Corporation
Replace inside cabin windows with aluminum plates.
FAA holder: Intercontinental Jet Service Corporation
Replace inside cabin windows with aluminum plates.
FAA holder: Intercontinental Jet Service Corporation
Installation of Jamco Galley System Digital Key Lock Replacement.
FAA holder: Jamco America Inc
Installation of an interior reconfiguration.
FAA holder: Jamco America Inc
Installation of a Gogo Business Aviation LLC AVANCE L3 cabin router line replaceable unit,.
FAA holder: Gogo Business Aviation LLC
Installation of an Executive Interior.
FAA holder: Associated Air Center, Inc. - c/o CT Corporation System
Installation of an executive interior.
FAA holder: Associated Air Center, Inc. - c/o CT Corporation System
One-Time Only STC for the installation of an executive interior with medical equipment.
FAA holder: Associated Air Center, Inc. - c/o CT Corporation System
Post modification STC for installation of an Executive Interior.
FAA holder: Associated Air Center, Inc. - c/o CT Corporation System
Post modification STC for installation of an Executive Interior.
FAA holder: Associated Air Center, Inc. - c/o CT Corporation System
Installation of executive interior. Approval limited to only 737-7AW, serial number 30031.
FAA holder: Associated Air Center, Inc. - c/o CT Corporation System
Installation of an executive interior. Approval is limited to Boeing 737-7BC, serial number 30328 ONLY.
FAA holder: Associated Air Center, Inc. - c/o CT Corporation System
Installation of an executive interior.
FAA holder: Associated Air Center, Inc. - c/o CT Corporation System
Installation of an executive interior.
FAA holder: Associated Air Center, Inc. - c/o CT Corporation System
Modification of an Existing Sports/Business Style Interior.
FAA holder: Associated Air Center, Inc. - c/o CT Corporation System
Installation of an Executive Interior.
FAA holder: Associated Air Center, Inc. - c/o CT Corporation System
Installation of an Executive Interior.
FAA holder: Associated Air Center, Inc. - c/o CT Corporation System
Installation of an Executive Interior.
FAA holder: Associated Air Center, Inc. - c/o CT Corporation System
Installation of interior arrangement.
FAA holder: Associated Air Center, Inc. - c/o CT Corporation System
Installation of a quick change interior.
FAA holder: Associated Air Center, Inc. - c/o CT Corporation System
Installation of an interior arrangement.
FAA holder: Associated Air Center, Inc. - c/o CT Corporation System