ST00923LA-DCabin and interiors
Installation of 14-passenger cabin interior. Approved for installation on G-IV serial number 1420 ONLY.
FAA holder: Gulfstream Aerospace Corporation
FAA STC category
Cabin and interiors STCs
Seating, cabin arrangement, galley, lavatory, entertainment, and interior changes. This directory contains 4,850 selected records listed with status Current in the June 30, 2026 FAA DRS snapshot and links every entry to its source.
Showing 4,681–4,800 of 4,850Page 40 of 41
View record
ST00922LA-DCabin and interiors
Installation of 15-passenger cabin interior. Approved for installation on GV serial number 612 ONLY.
FAA holder: Gulfstream Aerospace Corporation
ST09782SC-DCabin and interiors
Installation of an executive cabin interior.
FAA holder: Gulfstream Aerospace Corporation
SA9048NM-DCabin and interiors
Installation of PTC model 850 business class seats with provisions only modification for GTE Airfone Installation. This STC approves mechanical and structural installation of the seat assemblies only.
FAA holder: Midwest Express Airlines
SH876NECabin and interiors
Sound reduction wall panel system (SRWPS) interior installation.
FAA holder: Sikorsky Aircraft Corporation
SA02277ATCabin and interiors
Installation of a passenger seat. STC SA1335SO is a required part of this STC.
FAA holder: JAARS Inc.
ST01377CHCabin and interiors
Install 283 passenger seating configuration.
FAA holder: American Trans Air
ST00921LA-DCabin and interiors
Installation of 16-passenger cabin interior. Approved for installation of GV serial number 598 ONLY.
FAA holder: Gulfstream Aerospace Corporation
SR00969LACabin and interiors
Installation of a stabilized camera mount in the cabin.
FAA holder: Tokorozawa Koki USA, Inc.
SA1890WECabin and interiors
Installation of executive interior. Approved for Convair model 240, serial number 160 ONLY.
FAA holder: Kelowna Flightcraft Ltd
ST00638LACabin and interiors
Installation of AB10143-401 passenger seat.
FAA holder: Airbase Services, Inc.
SA1954SWCabin and interiors
Jump seat installation.
FAA holder: Mitsubishi Heavy Industries America Inc.
ST00015ATCabin and interiors
Installation of cargo door, Class 'E' cargo compartment interior, cargo handling system and barrier bulkhead.
FAA holder: W.D.C. Leasing
ST09658SCCabin and interiors
Installation of a cabin center headliner panel assembly and/or side ledge mounted game tables.
FAA holder: R T Aviation, Inc.
ST00773NYCabin and interiors
Installation of a passenger cabin liquor/beverage service cart P/N E500169. (747-222B, 238B, 422) (767-322).
FAA holder: Driessen Aircraft Interior Systems USA, Inc
ST00774NYCabin and interiors
Installation of a passenger cabin Liquor/beverage service cart P/N E500170. (757-222) (767-222) (727-222) (737 SERIES 222, 291, 322, 522) (747-100 SERIES 238B).
FAA holder: Driessen Aircraft Interior Systems USA, Inc
ST00983NYCabin and interiors
Installation of inflight service 'duty free' galley cart P/N E500169-01. For models 747-238, 747-422, 747-451; 757-222; 767-222, 767-322; 777-222.
FAA holder: Driessen Aircraft Interior Systems USA, Inc
SA1119WECabin and interiors
Installation of two additional emergency exits, seat track installation, Burns seats, modified buffets and carryon luggage racks and an interior arrangement.
FAA holder: Kelowna Flightcraft Ltd
SA1338WECabin and interiors
Installation of seat track, additional emergency exit and interior arrangement. (340 640 (340D), 440 Military C-131E 640 (440D)).
FAA holder: Kelowna Flightcraft Ltd
SA1407SWCabin and interiors
Provide 52-passenger seat aircraft with cargo carrying capability by installing an aft cargo door and reinforcing the floor and fuselage shell. Installation of STC SA1096WE required.
FAA holder: Kelowna Flightcraft Ltd
ST01092LACabin and interiors
Installation of Regent Aerospace wall mounted double flight attendant seat, p/n 883595-01.
FAA holder: Regent Aerospace Corporation
ST00918LA-DCabin and interiors
Installation of 14-passenger cabin interior. Approved for installation on GV serial number 599 ONLY.
FAA holder: Gulfstream Aerospace Corporation
ST00917LA-DCabin and interiors
Installation of 14-passenger cabin interior. Approved for installation on G-IV serial number 1415 ONLY.
FAA holder: Gulfstream Aerospace Corporation
ST00866WI-DCabin and interiors
Miscellaneous interior and electrical installations using FAA approved Boeing Document D800-10610-16, or later FAA approved revision. For model 747-2G4B.
FAA holder: Boeing Commercial Airplane Group
ST002254ATCabin and interiors
Installation of a custom interior.
FAA holder: Garrett Aviation Consulting Group LLP
SA7056SW-DCabin and interiors
Installation of the automatic cabin electrical load shed system.
FAA holder: Dassault Falcon Jet
SA4318SWCabin and interiors
Belt attachments for toilet seat.
FAA holder: AAR Airframe and Accessories Group
SA7616SWCabin and interiors
Installation of a cabin air temperature gage.
FAA holder: AAR Airframe and Accessories Group Inc
SA8114SWCabin and interiors
Installation of a cabin auxiliary heater system (electric), ground use only.
FAA holder: AAR Airframe and Accessories Group Inc
ST01179CH-DCabin and interiors
Installation of a forward left-hand lavatory passenger seat.
FAA holder: Gulfstream Aerospace Corporation
SA5309NM-DCabin and interiors
Installation of Hughes-Avicom APAX-150 worldlink passenger entertainment system.
FAA holder: Northwest Airlines Inc
SA9041NM-DCabin and interiors
Installation of Hughes-Avicon International video entertainment system. Limited to the DC-10-30 aircraft listed in Systems Lists 623872, 624144, and 623859.
FAA holder: Northwest Airlines Inc
ST00857SECabin and interiors
Installation of an upper deck galley in freighter aircraft.
FAA holder: Jamco America Inc
ST09842SCCabin and interiors
Installation of a left and right-hand galley. Approval is limited to Gulfstream G-1159A serial number 326 ONLY.
FAA holder: Million Air
ST00916LA-DCabin and interiors
Installation of 16-passenger cabin interior. Approved for Gulfstream GV serial number 602 only.
FAA holder: Gulfstream Aerospace Corporation
ST09780SC-DCabin and interiors
Installation of an aft belted lavatory for occupancy during taxi takeoff and landing.
FAA holder: Gulfstream Aerospace Corporation
ST00828SECabin and interiors
Removal of a forward left hand windscreen, relocation of the first three rows of left hand seats and installation of a double passenger seat immediately aft of the forward left hand entry door. Relocation of the emergency equipment from the deleted windscreen to the overhead bin.
FAA holder: Northwest Aerospace Technologies Inc
ST00914LA-DCabin and interiors
Installation of 18-passenger cabin interior. Approved for installation on GV serial number 600 only.
FAA holder: Gulfstream Aerospace Corporation
ST00915LA-DCabin and interiors
Installation of 14-passenger cabin interior.
FAA holder: Gulfstream Aerospace Corporation
SA02164AKCabin and interiors
Fabrication of bayonet-type seat foot assemblies and seat locking pin assembly.
FAA holder: DER Associates, Inc.
ST00912LA-DCabin and interiors
Installation of 12-passenger cabin interior.
FAA holder: Gulfstream Aerospace Corporation
ST09779SC-DCabin and interiors
S/N 1394 ONLY: Installation of an executive cabin interior.
FAA holder: Gulfstream Aerospace Corporation
ST01176CH-DCabin and interiors
Installation of forward right hand lavatory service panel structure. For serial numbers 1400 and on.
FAA holder: Gulfstream Aerospace Corporation
ST09776SC-DCabin and interiors
S/N 3002 ONLY: Installation of an executive passenger cabin interior.
FAA holder: Gulfstream Aerospace Corporation
ST09775SC-DCabin and interiors
Installation of a forward right-hand galley.
FAA holder: Gulfstream Aerospace Corporation
ST09778SC-DCabin and interiors
S/N 1385 ONLY: Installation of an executive cabin interior.
FAA holder: Gulfstream Aerospace Corporation
ST00915WICabin and interiors
Installation of interior panels (headliner, sidewall, windowliner, etc.).
FAA holder: Midcoast Aviation Inc
ST01176NYCabin and interiors
Installation of replacement floor panels in the cabin and cargo compartment.
FAA holder: Comtek Advanced Structures Ltd.
ST01254NYCabin and interiors
Installation of Galley Structures (P/N CG42A0100 and CG72A0100).
FAA holder: Comtek Advanced Structures Ltd.
ST00890WI-DCabin and interiors
Upper deck interior arrangement as defined by FAA Approved Boeing Document D800-1016-13.
FAA holder: Boeing Commercial Airplane Group
ST00891WI-DCabin and interiors
Upper deck galley installation as defined by FAA Approved Boeing Document D800-1016-14.
FAA holder: Boeing Commercial Airplane Group
ST09834SCCabin and interiors
Installation of an alternate cabin emergency exit to a position opposite the entry door.
FAA holder: Addison Express LLC
ST02220ATCabin and interiors
Manufacture of merchandise sales cart, P/N CNF023-101-( ) for galley stowage.
FAA holder: JK Aerospace, Inc.
SA8300SW-DCabin and interiors
Installation of automatic cabin electrical load shed system.
FAA holder: Dassault Falcon Jet
SA09830SCCabin and interiors
Installation of an entertainment cabinet.
FAA holder: Schwartz Engineering Co
ST02206ATCabin and interiors
Manufacture and installation of a high sound transmission loss composite passenger cabin interior system.
FAA holder: AAR Manufacturing Group Inc
ST00904WICabin and interiors
Full Interior Modification including RH Fwd Galley, Interior Shell, Entertainment Cabinet, Cabin Chairs and Side Facing Divan, lavatory, and Cabin Management System.
FAA holder: Executive Aircraft Corporation
ST00462CH-DCabin and interiors
Installation of aircraft cabin interior furnishings and cabinetry.
FAA holder: Garrett Aviation Services
ST01175CH-DCabin and interiors
Installation of an aft lavatory.
FAA holder: Gulfstream Aerospace Corporation
ST00911LA-DCabin and interiors
Installation of 15-passenger cabin interior.
FAA holder: Gulfstream Aerospace Corporation
ST02195ATCabin and interiors
Installation of design enhancements to existing main deck galleys (G1 through G8) and to the upper deck galley complex.
FAA holder: B/E Aerospace, Inc
SA145SWCabin and interiors
Installed cabin door (hinged at the bottom).
FAA holder: Signature Flight Support Corporation
SA188SWCabin and interiors
Installation of Scene-A-Ramic cabin windows.
FAA holder: Signature Flight Support Corporation
SA1994SWCabin and interiors
Installation of jump seat.
FAA holder: Signature Flight Support Corporation
SA2-1020Cabin and interiors
Interior arrangement in the cabin from Station 133 to 525.
FAA holder: Signature Flight Support Corporation
SA2-249Cabin and interiors
Alter cabin windows on R.H. side of fuselage.
FAA holder: Signature Flight Support Corporation
SA2-250Cabin and interiors
Alter cabin windows on R.H. side of fuselage.
FAA holder: Signature Flight Support Corporation
SA2-43Cabin and interiors
Fuselage structure modified R & L side to incorporte enlarged windows and relocation of the cabin emergency exit.
FAA holder: Signature Flight Support Corporation
SA2-515Cabin and interiors
Installation of cabin seats.
FAA holder: Signature Flight Support Corporation
SA2-770Cabin and interiors
Installation of extended cabin windows left hand and right hand side.
FAA holder: Signature Flight Support Corporation
SA2-80Cabin and interiors
Installed additional structure to support Warren McArthur seat Model 192.
FAA holder: Signature Flight Support Corporation
SA2-809Cabin and interiors
Installation of lavatory window L.H. side of aircraft between Stations 149 and 164 (inches aft of datum).
FAA holder: Signature Flight Support Corporation
SA2-910Cabin and interiors
Installation of electronic and interior equipment.
FAA holder: Signature Flight Support Corporation
SA2282SWCabin and interiors
Installation of auxiliary battery in aft cabin with rerouting of control system cables.
FAA holder: Signature Flight Support Corporation
SA2362SWCabin and interiors
Installation of jump seat.
FAA holder: Signature Flight Support Corporation
SA2363SWCabin and interiors
Installation of lavatory seat structure.
FAA holder: Signature Flight Support Corporation
SA2797SWCabin and interiors
Installation of jump seat (F.S. 496) approved for takeoff and landing.
FAA holder: Signature Flight Support Corporation
SA2899SWCabin and interiors
Installation of hostess jump seat and table.
FAA holder: Signature Flight Support Corporation
SA308SWCabin and interiors
Geneerco cabin floor installation.
FAA holder: Signature Flight Support Corporation
SA310SWCabin and interiors
Installation of Jump Seat.
FAA holder: Signature Flight Support Corporation
SA400SWCabin and interiors
Installation of interior arrangement.
FAA holder: Signature Flight Support Corporation
SA4206SWCabin and interiors
Installation of executive interior including shower with hot water tank and oxygen system changes.
FAA holder: Signature Flight Support Corporation
SA496SWCabin and interiors
Installation of cockpit jump seat.
FAA holder: Signature Flight Support Corporation
SA509SWCabin and interiors
Installation of execulette side mounted lavatory.
FAA holder: Signature Flight Support Corporation
SA562SWCabin and interiors
Install a stairway on main cabin door.
FAA holder: Signature Flight Support Corporation
SA78SWCabin and interiors
Installation of enlarged lavatory window on right side of aft fuselage station 444.
FAA holder: Signature Flight Support Corporation
ST01064LACabin and interiors
Installation of retrofit audio/video entertainment system includes Matsushita Passenger Control Unit (PCU) and Seat Electronic Box (SEB) in Brice Model B1000 seat.
FAA holder: Global Aviation
ST00910LA-DCabin and interiors
Installation of 14 passenger cabin interior. Approved for G-IV serial number 1395 ONLY.
FAA holder: Gulfstream Aerospace Corporation
SA2364SWCabin and interiors
Installation of two-place isle facing seat with end cabinets.
FAA holder: Signature Flight Support Corporation
ST01964ATCabin and interiors
Manufacture of a meal service cart for galley stowage.
FAA holder: JK Aerospace, Inc.
SA1106EACabin and interiors
Installation of baggage compartment structural entrance area for use with drawer jump seat.
FAA holder: Bombardier Completion Center Inc
SA1107EACabin and interiors
Installation of aft cabin bulkhead and door installation.
FAA holder: Bombardier Completion Center Inc
SA1114EACabin and interiors
Installation of cabin lining.
FAA holder: Bombardier Completion Center Inc
SA1116EACabin and interiors
Installation of forward cabin bulkhead LHS and RHS.
FAA holder: Bombardier Completion Center Inc
SA1140EACabin and interiors
Installation of a three place side facing divan, aft cabin left hand side.
FAA holder: Bombardier Completion Center Inc
SA1152EACabin and interiors
Installation of miscellaneous interior modifications.
FAA holder: Bombardier Completion Center Inc
SA1183EACabin and interiors
Installation of bar galley unit.
FAA holder: Bombardier Completion Center Inc
SA198NECabin and interiors
Installation of Bulkhead Cabin Door Fuselage Station 238.00.
FAA holder: Bombardier Completion Center Inc
SA199NECabin and interiors
Installation of dual Baker M-1035-1123/M1050/M2000 Cockpit Audio Public Address, Passenger Briefing, Entertainment, Intercom System.
FAA holder: Bombardier Completion Center Inc
SA200NECabin and interiors
Installation of Cockpit and Cabin Air Distribution System.
FAA holder: Bombardier Completion Center Inc
SA251NECabin and interiors
Installation of cabin headliner and TV entertainment.
FAA holder: Bombardier Completion Center Inc
SA350NECabin and interiors
Installation of modified Boeing 727-200 interior shell.
FAA holder: Bombardier Completion Center Inc
SA453NECabin and interiors
Modification of existing interior shell to allow reactivation of cargo door.
FAA holder: Bombardier Completion Center Inc
SA49NECabin and interiors
Installation of folding jump seat seat in the cockpit area.
FAA holder: Bombardier Completion Center Inc
ST01231NYCabin and interiors
Installation of a cabin door pressure advisory system.
FAA holder: D & D Design Inc
SA3366WECabin and interiors
Modification of cabin interior. Installation includes all or part of the following: overhead storage compartment, sculptured ceiling and sidewall panels, flourescent cabin lighting, standby lighting, emergency lighting, and overwing exit locator sign.
FAA holder: Britax Heath Tecna Inc.
SA3848WECabin and interiors
Installation of HITCO refrigerated galley module.
FAA holder: Britax Heath Tecna Inc.
ST01500ATCabin and interiors
Installation of interior cabin arrangement.
FAA holder: Aero Design Services, Inc
ST00909LA-DCabin and interiors
Installation of passenger cabin interior. Approved for installation on G-IV, serial number 1393 ONLY.
FAA holder: Gulfstream Aerospace Corporation
ST01270CHCabin and interiors
Install vent door system in a main cabin window of 727s modified with a cargo door per STC SA1444SO, SA1509SO, and SA1543SO.
FAA holder: National Aircraft Service Inc
ST01082CH-DCabin and interiors
Installation of a 14 Passenger Corporate Interior Seating Arrangement.
FAA holder: Gulfstream Aerospace Corporation
ST00908LA-DCabin and interiors
Installation of passenger cabin interior. Approved for installation on G-IV, serial number 1390 ONLY.
FAA holder: Gulfstream Aerospace Corporation
ST02152ATCabin and interiors
Installation of a custom interior (G-III, s/n 335).
FAA holder: Jormac Aerospace
SA94NECabin and interiors
Interior, electrical, and avionic installations.
FAA holder: Bombardier Completion Center Inc
ST00666NYCabin and interiors
Installation of in-seat video system components.
FAA holder: Inflight Canada Inc
ST00907LA-DCabin and interiors
Installation of passenger cabin interior.
FAA holder: Gulfstream Aerospace Corporation