SR09320RCAircraft structures
Installation of passenger sliding door kit.
FAA holder: Aeronautical Accessories, Inc.
FAA STC category
Aircraft structures STCs
Fuselage, wing, floor, door, window, frame, and other structural changes. This directory contains 1,149 selected records listed with status Current in the June 30, 2026 FAA DRS snapshot and links every entry to its source.
Showing 1,081–1,149 of 1,149Page 10 of 10
View record
SA6061NMAircraft structures
Installation of electrothermal upper wing anti-ice system.
FAA holder: Honeywell International Inc.
ST09870SCAircraft structures
Installation of Mechanical Window Shades.
FAA holder: Lou Martin & Associates
SA02174AK-DAircraft structures
Fabrication and installation of antifog window liner kit no. ATSW8 in Model 208, or Kit No. ATSW8-B in Model 208B.
FAA holder: Aero Twin, Inc
ST09850SCAircraft structures
Installation of left and right wing trailing edge interconnect wire harness system.
FAA holder: Aviation Devices & Electronic Components LLC
SA02173AK-DAircraft structures
Fabrication and installation of Aero Twin, Inc. single place folding seats P/N FS206-100 and Floor Structure Kit No. AFS-206-200.
FAA holder: Aero Twin, Inc
SA00527SEAircraft structures
Installation of Inspection Covers over the wing front spar.
FAA holder: Ronald S. Piercy dba Rainbow Flying Service
SR09260RCAircraft structures
Installation of forward door and aft door bubble type windows.
FAA holder: Tech-Tool Plastics Inc
SR01285NYAircraft structures
1) Installation of Oil Cooler Support Access Door. 2) Installation of Modified Oil Cooler Support Access Panel.
FAA holder: Alpine Helicopters Ltd
ST00160WIAircraft structures
Installation of an Aft Vanity Cabinet with a sink, a toilet enclosure and a storage cabinet assembly located on the right hand side between Fuselage Station 542 and 588.
FAA holder: Bombardier Completion Center Inc
ST00862SEAircraft structures
Modification and reinforcement of the fuselage floor structure.
FAA holder: Wagner Aeronautical INC
SA02167AK-DAircraft structures
Fabrication and installation of single place folding seats p/n FS206-100 and Floor Structure Kit No. AFS-206-100.
FAA holder: Aero Twin, Inc
ST09581SCAircraft structures
Installation of MSA Accordia Window Shades.
FAA holder: Gulfstream Aerospace Corporation
ST09831SCAircraft structures
Installation of Wing Anti-Ice Thermostat/Anticipator.
FAA holder: Honeywell International
SA17CEAircraft structures
Addition of 24.0 inches of wing structure to each wing on the outboard end.
FAA holder: Kenmore Air Harbor Inc
SA00554ATAircraft structures
Installation of composite aft spinner bulkhead and/or composite spinner.
FAA holder: TCB Composite Co.
SA00717ATAircraft structures
Installation of composite aft spinner bulkhead.
FAA holder: TCB Composite Co.
SA00735ATAircraft structures
Installation of composite aft spinner bulkhead and/or composite spinner.
FAA holder: TCB Composite Co.
SA00821ATAircraft structures
Installation of composite aft spinner bulkhead and/or composite spinner.
FAA holder: TCB Composite Co.
SA00945ATAircraft structures
Installation of composite forward bulkhead.
FAA holder: TCB Composite Co.
SA01284ATAircraft structures
Installation of Composite Spinner Bulkhead.
FAA holder: TCB Composite Co.
SA74GLAircraft structures
Install wing tip recognition lights.
FAA holder: Signature Flight Support Corporation
ST01252NYAircraft structures
Installation of Cockpit Window shades manufactured by Aeroshade Technologies.
FAA holder: RS Enterprises
ST00645SEAircraft structures
Installation of guideline(r) photoluminescent floor path marking system.
FAA holder: Kennco Support Services
SR02208ATAircraft structures
Installation of a floor panel system.
FAA holder: AAR Manufacturing Group Inc
SA150SWAircraft structures
Installed Southwind Heater, one in each side of center wing section.
FAA holder: Signature Flight Support Corporation
SA1993SWAircraft structures
Installation of wing ice lights.
FAA holder: Signature Flight Support Corporation
SA2-1071Aircraft structures
Manufacture of alcohol under wing to fuselage fillet tanks, P/N 352581, to replace Douglas alcohol tanks P/N 5161344 or 5188619, and mounting bracket P/N 352573 replacing the Douglas brackets P/N 5161873-46, -48, -52, -54 and Douglas P/N 4161884 and 4161882.
FAA holder: Signature Flight Support Corporation
SA2-1531Aircraft structures
Installation of wing tips and related equipment.
FAA holder: Signature Flight Support Corporation
SA2-201Aircraft structures
A section of the forward spar inside fuselage altered.
FAA holder: Signature Flight Support Corporation
SA2-222Aircraft structures
Installation of aircraft type door.
FAA holder: Signature Flight Support Corporation
SA2-39Aircraft structures
The fuselage structure altered to incorporate a window between Station 492 and 506.
FAA holder: Signature Flight Support Corporation
SA2-44Aircraft structures
Altered the fuselage structure to incorporate enlarged windows.
FAA holder: Signature Flight Support Corporation
SA2-524Aircraft structures
Installation of R&L cockpit window.
FAA holder: Signature Flight Support Corporation
SA2-56Aircraft structures
The landing light mounting in each outer wing panel leading edge altered.
FAA holder: Signature Flight Support Corporation
SA2-58Aircraft structures
Installation of picture window.
FAA holder: Signature Flight Support Corporation
SA2-70Aircraft structures
Installation of wing tip mounted pitot masts and relocation of airspeed static source.
FAA holder: Signature Flight Support Corporation
SA2-71Aircraft structures
Removal of wing trailing edge extensions and installation of new trailing edge fairing.
FAA holder: Signature Flight Support Corporation
SA2-84Aircraft structures
Fuselage structure modified R & L side to incorporate enlarged windows.
FAA holder: Signature Flight Support Corporation
SA2-877Aircraft structures
Rework standard chairs P/N 4FF163A/1 LH and P/N 4FF164A/1 RH to spar chair P/N 4FF165A/1 LH and P/N 4FF166A/1 RH.
FAA holder: Signature Flight Support Corporation
SA2372SWAircraft structures
Under floor double chair support structure.
FAA holder: Signature Flight Support Corporation
SA2436SWAircraft structures
Installation of EAS fabricated light weight floor.
FAA holder: Signature Flight Support Corporation
SA2455SWAircraft structures
Installation of EAS fabricated light weight floor #2.
FAA holder: Signature Flight Support Corporation
SA2464SWAircraft structures
Installation of light weight floor #3.
FAA holder: Signature Flight Support Corporation
SA249SWAircraft structures
Installation of airstair door.
FAA holder: Signature Flight Support Corporation
SA4067SWAircraft structures
Installation of Freon air conditioner compressor/condensor package in aft fuselage tail section.
FAA holder: Signature Flight Support Corporation
SA474SWAircraft structures
Installation of chairs and floor structure.
FAA holder: Signature Flight Support Corporation
SA50SWAircraft structures
Installation of Howard Aero designed extended wing tip.
FAA holder: Signature Flight Support Corporation
SA510SWAircraft structures
Installation of Panoramic Window.
FAA holder: Signature Flight Support Corporation
SR01236NYAircraft structures
Installation of an electric hoist and composite sliding door.
FAA holder: Bell Helicopter Textron Canada
SA7888SWAircraft structures
Replace existing Beechcraft window assembles, p/n 50-420013-1,with new window assemblies.
FAA holder: Crossroads Aviation Inc
ST01098CHAircraft structures
Installation of Aft Equipment Bay Door Steps.
FAA holder: Gulfstream Aerospace Corporation
SA09743SCAircraft structures
Installation of electric window shades.
FAA holder: Lou Martin & Associates
SA00270WIAircraft structures
Installation of fiberglass replacement wing tips.
FAA holder: Aircraft Development Co
SA1665CEAircraft structures
Installation strut/wing and strut/fuselage fairings, lightning hole covers, and aerodynamic putty.
FAA holder: Aircraft Development Co
SA1667CEAircraft structures
Installation of strut/wing and strut/fuselage fairings, lightning hole covers and aerodynamic putty.
FAA holder: Aircraft Development Co
SA2502CEAircraft structures
Installation of strut/wing and strut/ fuselage fairings, lightning hole covers, and aerodynamic putty.
FAA holder: Aircraft Development Co
SA01220NYAircraft structures
Installation of right hand wing landing light and floor track.
FAA holder: Viking Air Limited
SR00813SEAircraft structures
Fabrication and installation of Columbia Helicopters pylon fittings P/N C54S2022-1 and -2 for replacement of Sikorsky fittings P/N 6420-66341-101 and -102 at the transition of fuselage to the tail boom.
FAA holder: Columbia Helicopters Inc
SA2108WEAircraft structures
Installation of Madras Air Service wing tips.
FAA holder: Madras Air Service
SA4077NMAircraft structures
Installation of replacement aft fuselage section.
FAA holder: Univair Aircraft Corporation
SA4095NMAircraft structures
Replacement fuselage assembly with optional features.
FAA holder: Univair Aircraft Corporation
SA2212WEAircraft structures
Installation of emblem lights mounted on trailing edge of wing tips.
FAA holder: DeVore Aviation Corporation of America, a New Mexico Corporation
SA2233WEAircraft structures
Installation of emblem lights mounted on trailing edge of wing tips.
FAA holder: DeVore Aviation Corporation of America, a New Mexico Corporation
SA2774WEAircraft structures
Installation of wing tip mounted emblem lights.
FAA holder: DeVore Aviation Corporation of America, a New Mexico Corporation
SA2797WEAircraft structures
Installation of wing tip mounted emblem lights.
FAA holder: DeVore Aviation Corporation of America, a New Mexico Corporation
SA02056ATAircraft structures
Installation of wing tip extensions in accordance with Aviation Enterprises (AE) Installation Instructions, Revision D, dated January 13, 2000, or later FAA approved revisions. Installation of wing aerodynamic fences in accordance with AE Drawing No. SKM-FTII, Revision C, dated August 17, or later FAA approved revisions. Increase in the Maximum Takeoff Gross Weight from 4700 lbs to 5120 lbs.
FAA holder: Aviation Enterprises