STC SA253NW
FAA DRS lists SA253NW as Current · Reissued, held by Avcon Industries Inc, for Learjet Learjet 24 and Learjet Learjet 24A. Recorded change: Installation of the Mark II performance system, including recontoured wing leading edge, recontoured flap leading edge, wing vortex generator removal, installation of wing stall strips and other minor refinements in accordance with Avcon Master Drawing List No. 1084 dated November 16, 2010, or later FAA approved revision. 350 Knot Vmo authorized if equipped in accordance with Avcon Master Drawing List No. 1084 dated November 16, 2010 or later FAA approved revision. An FAA Approved Airplane Flight Manual Supplement is required for each model. Snapshot dated June 30, 2026.
Recorded modification
What the FAA record covers
Installation of the Mark II performance system, including recontoured wing leading edge, recontoured flap leading edge, wing vortex generator removal, installation of wing stall strips and other minor refinements in accordance with Avcon Master Drawing List No. 1084 dated November 16, 2010, or later FAA approved revision. 350 Knot Vmo authorized if equipped in accordance with Avcon Master Drawing List No. 1084 dated November 16, 2010 or later FAA approved revision. An FAA Approved Airplane Flight Manual Supplement is required for each model.
SA253NW identifies the approval, recorded holder, named aircraft, and modification scope. It does not confirm kit availability, serial-number effectivity, data rights, price, or installation authority.
Applicability
Aircraft named in FAA DRS
Named aircraft: Learjet Learjet 24 and Learjet Learjet 24A. Confirm the approved model list, serial effectivity, configuration, and certificate revision.
Buyer checks
Confirm before sourcing
- 01Does it cover the exact Learjet Learjet 24 and Learjet Learjet 24A model, serial range, and configuration?
- 02Which control configuration, rigging, limitations, and inspections apply?
- 03Who can legally supply the design data, kit, instructions, and ICAs?
- 04What parts, labor, conformity, and return-to-service work are excluded?
Related flight controls STCs
Installation of elevator tail cone fairing per Smith Speed Conversions Drawing List 1005, stamped FAA Approved on April 15, 1980, or later.
FAA holder: D'Shannon Products Ltd.
Installation of elevator tail cone fairing per Smith Speed Conversions Drawing List 1005, stamped FAA Approved on April 15, 1980, or later.
FAA holder: D'Shannon Products Ltd.
Installation of flap and aileron fairings and seals.
FAA holder: D'Shannon Products Ltd.
Installation of sensors and provisions for future capability to monitor aircraft control surface deflections, existing pilot control input signals, and other aircraft systems in accordance with Sierra Nevada Corporation Drawing List, Report Number MDL-0142-25-9315, Revision B, dated February 24, 2011, FAA approved July 25, 2011, or later FAA approved revision.
FAA holder: Sierra Nevada Corporation