SA01844WIFlight controls
Installation of Garmin GFC 600 Automatic Flight Control System.
FAA holder: Garmin International Inc.
FAA STC category
Flight controls STCs
Primary and secondary flight-control, trim, flap, spoiler, and control-surface changes. This directory contains 607 selected records listed with status Current in the June 30, 2026 FAA DRS snapshot and links every entry to its source.
Showing 1–120 of 607Page 1 of 6
View record
SA12280IBFlight controls
Installation of Wing and Outboard Fore Flap Trailing Edge Assemblies.
FAA holder: Unity Aviation Canada Ltd.
SA1208WEFlight controls
Steel aileron actuating fitting replacement for Boeing P/N 75-1417.
FAA holder: AvComp LLC
SA02266AKFlight controls
Replacement of Rudder and Elevator Hinge Bearings with P. Ponk Aviation Bearing p/n PPA-1401.
FAA holder: McFarlane Aviation LLC
ST01999ATFlight controls
This installation adds three recording parameters (pitch control, lateral control, and rudder) to the existing A300 and A310 Digital Flight Data Recorder (DFDR) to meet the requirements of 14 CFR 121.344.
FAA holder: Acron Aviation Inc.
SA11855IBFlight controls
Installation of the Flap Roller Bearing Assembly.
FAA holder: Marsh Brothers Aviation Inc.
SA09768DSFlight controls
Installation of S-TEC 01236 Digital Flight Control System (DFCS).
FAA holder: S-Tec Corporation
SA8334SWFlight controls
Installation of dual toe brakes including rudder pedals, linkages and torque tubes.
FAA holder: Peter C. Morrison
SA8438SWFlight controls
Installation of dual toe brakes including rudder pedals, linkages and torque tubes.
FAA holder: Peter C. Morrison
SA00088WIFlight controls
Installation of replacement stabilizer and elevator tips.
FAA holder: Curry Aviation LLC
SA3584NMFlight controls
Installation of aileron and flap gap seals.
FAA holder: CheckSix AeroSolutions, LLC
SA907EAFlight controls
Installation of outboard aileron reinforcement.
FAA holder: PC6-AU23 Spares LLC
SA2212CEFlight controls
Installation of STOL Kit (wing leading edge cuffs, droop tips, stall fences and aileron gap seals).
FAA holder: Curry Aviation LLC
ST00555SEFlight controls
Modification in the leading edge slat and flap configurations.
FAA holder: Raisbeck Engineering Inc.
SA00085IBFlight controls
Installation of Elevator Replacement Trailing Edge.
FAA holder: Rocky Mountain Aircraft
SA02014WIFlight controls
Installation of a swept vertical stabilizer and rudder assembly.
FAA holder: Bemidji Aviation Services, Inc.
ST00224MCFlight controls
Replacement of an Elevator Feel Computer Drain Line.
FAA holder: StandardAero Business Aviation Services LLC
SA09766DSFlight controls
Installation of an S-TEC 01326 Digital Flight Control System (DFCS).
FAA holder: S-TEC Corporation
SA00163ATFlight controls
Installation of "Speed Splitter" flap bracket fairings.
FAA holder: Whelen Aerospace Technologies
SA00263ATFlight controls
Installation of 'speed splitter' flap bracket fairings.
FAA holder: Whelen Aerospace Technologies
SA3281SOFlight controls
Installation of flap bracket fairings.
FAA holder: Whelen Aerospace Technologies
SA3282SOFlight controls
Installation of flap bracket fairings.
FAA holder: Whelen Aerospace Technologies
SA00406WIFlight controls
Installation of replacement flap trailing edge bulbs with AOG Drawing.
FAA holder: Athena Aircraft, LLC
SA00709SEFlight controls
Installation of replacement control surface skin panels.
FAA holder: Athena Aircraft, LLC
SA00019WIFlight controls
Installation of replacement stabilizer and elevator tips.
FAA holder: Curry Aviation LLC
SA00087WIFlight controls
Installation of replacement stabilizer and elevator tips.
FAA holder: Curry Aviation LLC
SA1048CEFlight controls
Installation of STOL kit (wing leading edge cuffs, stall fences, aileron gap seals and droop wing tips).
FAA holder: Curry Aviation LLC
SA2213CEFlight controls
Installation of STOL Kit (wing leading edge cuffs, droop tips, stall fences and aileron gap seals).
FAA holder: Curry Aviation LLC
SA2422CEFlight controls
Installation of wing leading edge cuffs, drooped tips, stall panels, and aileron gap seals.
FAA holder: Curry Aviation LLC
SA2488CEFlight controls
Establishes the compatibility to install the flap actuated aileron droop system.
FAA holder: Curry Aviation LLC
SA2497CEFlight controls
Establishes the compatibility to install the flap actuated aileron droop system per STC SA1441WE and the wing leading edge cuffs, drooped tips and stall fences per STC SA968CE.
FAA holder: Curry Aviation LLC
SA2499CEFlight controls
Establishes the compatibility to install the flap actuated aileron droop system per SA2340WE and the wing leading edge cuffs, drooped tips and stall fences per STC SA2023CE.
FAA holder: Curry Aviation LLC
SA2500CEFlight controls
Establishes the compatibility to install the flap actuated aileron droop system per STC SA1435WE and the wing leading edge cuffs, drooped tips and stall fences per STC SA967CE.
FAA holder: Curry Aviation LLC
SA2551CEFlight controls
Establishes the compatibility to install the flap actuated aileron droop system per STC SA1689WE, and the wing leading edge cuffs, drooped tips and stall fences per STC SA910CE.
FAA holder: Curry Aviation LLC
SA2662CEFlight controls
Installation of wing leading edge cuffs, drooped tips, stall fences and aileron gap seals.
FAA holder: Curry Aviation LLC
SA2677CEFlight controls
Installation of aileron and flap gap seals per Horton-STOL Craft Drawing List #15 with an approval date of August 18, 1994 or later FAA approved revision.
FAA holder: Curry Aviation LLC
SA2780CEFlight controls
Installation of wing leading edge cuffs, drooped wing tips, stall fences and aileron gap seals.
FAA holder: Curry Aviation LLC
SA2784SWFlight controls
Installation of leading edge cuffs, stall fences, aileron seals, wing tips.
FAA holder: Curry Aviation LLC
SA909CEFlight controls
Install STOL kit (wing leading edge cuffs, drooped tips, stall fences and aileron gap seals). (152 LANDPLANE).
FAA holder: Curry Aviation LLC
SA910CEFlight controls
Installation of wing leading edge cuffs, drooped tips, stall fences and Aileron gap seals. (172, 172Q LANDPLANE) (172P LANDPLANE AND FLOATPLANE).
FAA holder: Curry Aviation LLC
SA948CEFlight controls
STOL kit installation (wing leading edge cuffs, drooped tips, stall fences, and aileron gap seals). (R172K LANDPLANE AND FLOATPLANE) (172RG LANDPLANE ONLY).
FAA holder: Curry Aviation LLC
SA950CEFlight controls
Installation STOL kits (wing leading edge cuffs, drooped tips, stall fences and aileron gap seals).
FAA holder: Curry Aviation LLC
SA967CEFlight controls
Install STOL kit (wing leading edge cuffs, drooped tips, stall fences and aileron gap seals).
FAA holder: Curry Aviation LLC
SA968CEFlight controls
STOL kit installation (wing leading edge cuffs, drooped tips, stall fences, and aileron gap seals). (A185F LANDPLANES; SEAPLANES AND AMPHIBIANS).
FAA holder: Curry Aviation LLC
SA989CEFlight controls
Install STOL kit (wing leading edge cuffs, drooped tips, stall fences and aileron gap seals).
FAA holder: Curry Aviation LLC
SA993CEFlight controls
Install STOL kit (leading edge cuff, droop tips, stall fence and aileron gap seals).
FAA holder: Curry Aviation LLC
SA00028ATFlight controls
Installation of 'speed splitter' flap bracket fairings.
FAA holder: Whelen Aerospace Technologies
SA00029ATFlight controls
Installation of 'Speed Splitter' flap bracket fairings.
FAA holder: Whelen Aerospace Technologies
SA809NWFlight controls
Installation of fixed (flush) cowl flap, nose gear strut fairing and retainer.
FAA holder: Fletchair Inc.
ST01821WIFlight controls
Installation of Garmin G5000 Integrated Flight Deck with GFC 700 Automatic Flight Control System (AFCS).
FAA holder: Garmin International Inc
SA2266SWFlight controls
Fabrication and installation of wing panel flap actuator access.
FAA holder: Mitsubishi Heavy Industries America Inc.
SA04195NYFlight controls
Installation of the KFC 230 Aerocruze Automatic Flight Control System (FCS) upgraded from KFC 200 FCS.
FAA holder: Honeywell International Inc. (Bendix King)
SR01961WIFlight controls
Installation of a Garmin GFC 600H Flight Control System.
FAA holder: Garmin International Inc
SA02415CHFlight controls
Installation of Flight Boss LTD S-RPE-CN Rudder Pedal Extensions.
FAA holder: Flight Boss Ltd.
SA02462CHFlight controls
Installation of Flight Boss LTD S-RPE-CO Rudder Pedal Extensions.
FAA holder: Flight Boss Ltd.
SA04181NYFlight controls
Installation of the KFC 230 Aerocruze Automatic Flight Control System.
FAA holder: Honeywell International Inc
SA09764DSFlight controls
Installation of an S-TEC 01326 Digital Flight Control System (DFCS).
FAA holder: S-TEC Corporation
SA01093WIFlight controls
Modification of flap operation mechanism. Install according to Renaissance Aircraft LLC Top Drawing R282315, Revision A, or later FAA approved revisions.
FAA holder: Luscombe Aircraft Corporation
SA09763DSFlight controls
Installation of an S-TEC 01326 Digital Flight Control System (DFCS).
FAA holder: S-TEC Corporation
SA09762DSFlight controls
Installation of an S-TEC 01326 Digital Flight Control System (DFCS).
FAA holder: S-TEC Corporation
SA04561NYFlight controls
Install Part 1 - Harbour Air Ltd. Water Rudder Blade, Pulleys and Fairlead Assemblies.
FAA holder: Harbour Air Ltd.
SA2256WEFlight controls
Installation of leading edge "CUFF" and aileron gap covers on each wing.
FAA holder: Stene Aviation Inc
ST01075DEFlight controls
Installation of Supplemental Flap/Slat Actuator Heater System.
FAA holder: Peregrine
SA09761DSFlight controls
Installation of an S-TEC 01326 Digital Flight Control System (DFCS).
FAA holder: S-TEC Corporation
SA00691WI-DFlight controls
Installation of Bendix/King KFC 225 Automatic Flight Control System.
FAA holder: Honeywell International Inc
ST02540AKFlight controls
Fabrication and installation of Aero Twin, Inc., Rudder Gust Lock Kit No. 4111-212.
FAA holder: Aero Twin Inc
ST02699SEFlight controls
Installation of Honeywell Flight Data Acquisition Management \nSystem (FDAMS) with Flight Control Input Position Sensors.
FAA holder: Neptune Aviation Transport Services
SA09760DSFlight controls
Installation of an S-TEC 01326 Digital Flight Control System (DFCS).
FAA holder: S-TEC Corporation
SA09759DSFlight controls
Installation of an S-TEC 01326 Digital Flight Control System (DFCS).
FAA holder: S-TEC Corporation
SA1567CE-DFlight controls
Installation of KAP 100 single axis, KAP 150 two axis, or KFC 150 two axis flight control system, and optional KAS 297B vertical speed and altitude selector.
FAA holder: Honeywell International Inc
SA00997WI-DFlight controls
Installation of Bendix/King KFC 225 Automatic Flight Control System. For Model 421C, serial numbers 421C0401 and after.
FAA holder: Honeywell International Inc
SA00882WI-DFlight controls
Installation of Bendix/King KFC 225 Automatic Flight Control System.
FAA holder: Honeywell International Inc
SA01161WI-DFlight controls
Installation of the Bendix/King KFC 225 Flight Control System.
FAA holder: Honeywell International Inc
SA00656WI-DFlight controls
Installation of Bendix/King KFC 225 Automatic Flight Control System.
FAA holder: Honeywell International Inc
SA00657WI-DFlight controls
Installation of the Bendix/King KFC 225 Automatic Flight Control System and EHI 40 Electronic Horizontal Situation indicator system.
FAA holder: Honeywell International Inc
SA00666WI-DFlight controls
Installation of Bendix/King KFC 225 automatic flight control system.
FAA holder: Honeywell International Inc
SA00667WI-DFlight controls
Installation of Bendix/King KFC 225 Automatic Flight Control System.
FAA holder: Honeywell International Inc
SA00771WI-DFlight controls
Installation of Bendix/King KFC 225 automatic flight control system.
FAA holder: Honeywell International Inc
SA00826WI-DFlight controls
Installation of Bendix/King KFC 225 automatic flight control system.
FAA holder: Honeywell International Inc
SA1190CEFlight controls
Installation of King KFC 200 flight control system (2 axis).
FAA holder: Honeywell International Inc
SA1201CEFlight controls
Installation of King KFC 200, 2 axis, flight control system with a King KCS-55 (or -55A) compass and a King KI-255 (or -256) flight command indicator or a KG-258 attitude horizon gyro with a KC-292 mode controller.
FAA holder: Honeywell International Inc
SH2541CEFlight controls
Install Bendix/King KAP 150H Flight Control System.
FAA holder: Honeywell International Inc
SA00249WI-DFlight controls
Installation of Bendix/King KFC 200 Automatic Flight Control System.
FAA holder: Honeywell International Inc
SA00442WI-DFlight controls
Installation of Bendix/King KAP 140 Automatic Flight Control System.
FAA holder: Honeywell International Inc
SA00444WI-DFlight controls
Installation of Bendix/King KAP 140 Automatic Flight Control System with optional KCS 55A Compass System.
FAA holder: Honeywell International Inc
SA00817WI-DFlight controls
Installation of Bendix/King KFC 225 Automatic flight Control System.
FAA holder: Honeywell International Inc
SA2319CE-DFlight controls
Installation of the Bendix/King KAP 100 Single Axis, KAP 150 Two Axis, or KFC 150 Two Axis Automatic Flight Control System and optional KAS 297B Vertical Speed and Altitude Selector.
FAA holder: Honeywell International Inc
SA1296CEFlight controls
Installation of King KFC-200 2-axis, flight control system with KI-255 (or -256) flight command indicator or a KG-258 attitude horizon gyro with a KC-292 mode controller.
FAA holder: Honeywell International Inc
SA1297CEFlight controls
Installation of King KFC 200 2-axis(3 optional) flight control system with a King KI 255 (or -256) Flight Command Indicator or a KG 258 Attitude Horizon Gyro with a KC 292 Mode Controller.
FAA holder: Honeywell International Inc
SA1425CEFlight controls
Installation of the King KFC-200 automatic flight control system.
FAA holder: Honeywell International Inc
SA1273CEFlight controls
Installation of King KFC 200 2-axis(3 optional) flight control system with a King KI-255 (or -256) flight command indicator or a KG-258 attitude horizon gyro with a KC-292 mode controller.
FAA holder: Honeywell International Inc
SA1276CEFlight controls
Installation of King KFC 200, 2-axis (3 optional) flight control system with a KI 255 (or -256) flight command indicator or KG-258 attitude horizon gyro and a KC-292 mode controller.
FAA holder: Honeywell International Inc
SA1289CEFlight controls
Installation of King KFC-200, 2-axis (3 optional) flight control system with a Bendix/King KI-255 (or -256) flight command indicator or a KG-258 attitude horizon gyro with a KC-292 mode controller.
FAA holder: Honeywell International Inc
SA1778CE-DFlight controls
Installation of KAP 100 single-axis, KAP 150 two-axis or KFC 150 two-axis flight control system with optional third (yaw) axis and opetional KAS 297B vertical speed and altitude selector.
FAA holder: Honeywell International Inc