STC SA841NW
FAA DRS lists SA841NW as Current · Reissued, held by Avcon Industries Inc, for Learjet 24B, Learjet 24B-A, and Learjet 24D, and 4 more aircraft configurations. Recorded change: Installation of the Mark II performance system, including recontoured flap leading edge, wing vortex generator removal, installation of wing stall strips and other minor refinements in accordance with Avcon Master Drawing List No. 1085 dated November 16, 2010, or later FAA approved revision. 350 Knot Vmo authorized if equipped in accordance with Avcon Master Drawing No. 1085 dated November 16, 2010, or later FAA approved revision. An FAA approved Airplane Flight Manual Supplement is required for each model. Snapshot dated June 30, 2026.
Recorded modification
What the FAA record covers
Installation of the Mark II performance system, including recontoured flap leading edge, wing vortex generator removal, installation of wing stall strips and other minor refinements in accordance with Avcon Master Drawing List No. 1085 dated November 16, 2010, or later FAA approved revision. 350 Knot Vmo authorized if equipped in accordance with Avcon Master Drawing No. 1085 dated November 16, 2010, or later FAA approved revision. An FAA approved Airplane Flight Manual Supplement is required for each model.
SA841NW identifies the approval, recorded holder, named aircraft, and modification scope. It does not confirm kit availability, serial-number effectivity, data rights, price, or installation authority.
Applicability
Aircraft named in FAA DRS
Named aircraft: Learjet 24B, Learjet 24B-A, and Learjet 24D, and 4 more aircraft configurations. Confirm the approved model list, serial effectivity, configuration, and certificate revision.
Buyer checks
Confirm before sourcing
- 01Does it cover the exact Learjet 24B and Learjet 24B-A, and 5 more aircraft configurations model, serial range, and configuration?
- 02Which control configuration, rigging, limitations, and inspections apply?
- 03Who can legally supply the design data, kit, instructions, and ICAs?
- 04What parts, labor, conformity, and return-to-service work are excluded?
Related flight controls STCs
Installation of flap actuated aileron droop system recontoured wing leading edge and flap actuated elevator trim system. (206 EXCEPT TU206F, U206F, U206E, U206G, TU206G).
FAA holder: Sierra Industries Inc
Installation of Visual Instruments flap position indicating system.
FAA holder: Visual Instruments LLC
Installation of Replacement Spoiler Servo Actuator Housing and Assemblies for OEM Part numbers A44700-007 and A44700-009 with 3 Point Machining & Aerospace (3PMA) Part Number A44700-009-3PMA.
FAA holder: 3 Points Machining & Aerospace