Aircraft STC directory
American Champion Aircraft Corp 7BCM (Army L-16A) STCs
The Jun 30, 2026 FAA DRS snapshot contains 66 selected supplemental type certificates with status Current whose public applicability data names the American Champion Aircraft Corp 7BCM (Army L-16A). Use it to identify modification scope and recorded holders—not to determine serial-number effectivity, compatibility, installation approval, or commercial availability.
Modification demand surface
Recorded holders
Recently revised 7BCM (Army L-16A) STCs
Showing the 66 most recently revised records. Each entry links to the FAA source and separates public approval data from private commercial claims.
If Champion Part Number 7-480 door is installed, remove two of AN 380-2-2 cotter pins and two of AN 393-3 flat head pins as necessarry to remove one door. If American Champion Part Number 7-1265 door is installed, remove quick release pins to remove one door. Weight change --10lb at +21.06 arm.
FAA holder: National Aeronca Association
Application of fabric and polyurethane finishing system.
FAA holder: Shady Aviation LLC
Installation of the Electroair Electronic Ignition System.
FAA holder: Electroair Acquisition Corporation
Fabrication and installation of a Tail Wheel Anti-Shimmy Dampener.
FAA holder: Keller Engineering Group LLC
Fabrication and installation of a Tail Wheel Anti-Shimmy Dampener.
FAA holder: Keller Engineering Group LLC
Remove original cloth covering and install Ceconite covering.
FAA holder: Ceconite Division of Poly-Fiber Inc.
Tow bar, release mechanism, and safety tow link.
FAA holder: Fliegen Works Inc. \n d/b/a Pacific Aerial Tow Hooks
Entered in Error - See SA00410BO.
FAA holder: uAvionix Corporation
Installation of an AV-30-C Multi-Mode Indicator.
FAA holder: uAvionix Corporation
Installation of Engines and propellers.
FAA holder: C William Pancake Jr
Attachment of fabric covering and wing leading edge.
FAA holder: C William Pancake Jr
Installation of the uAvionix skyBeacon Automatic Dependent Surveillance-Broadcast (ADS-B) Out.
FAA holder: uAvionix Corporation
Installation of Latitude Technologies Skynode S200 Satcom system must be performed.
FAA holder: Latitude Technologies Corporation
Installation and Manufacturing of Aluminum Wing Spars.
FAA holder: MILMAN Engineering Inc
Installation of push-button starter system.
FAA holder: Hartzell Engine Technologies, LLC
Installation of Madras Air Service Part No. 104 wing tips.
FAA holder: Madras Air Service
Installation of replacement metal leading edge.
FAA holder: MILMAN Engineering Inc
Installation of Rainbow Flying Service fuselage formers.
FAA holder: Rainbow Flying Service
Installation of Cooper Superflite 102 Fabric.
FAA holder: Aviation Products Systems Inc.
Installation of an oil cooler system.
FAA holder: Steve's Aircraft
Installation of Challenger Reusable Air Filter.
FAA holder: Challenger Aviation Products Inc.
Installation of Electronics International Inc. Glass Panel Engine Monitor (with In Flight Data) CGR-30P.
FAA holder: Electronics International Inc.
Installation of a hydraulically actuated ski drag assembly.
FAA holder: Northern Airframes LLC
Installation of an alternate method of fastening aluminum wing ribs to wood spars.
FAA holder: Rainbow Flying Service LLC
Installation of Aerospace Logic Aircraft Instruments.
FAA holder: Aerospace Logic Inc.
Operation of airplanes on unleaded automotive gasoline.
FAA holder: Petersen Aviation Inc
Option (1) Installation of a replacement main tank fuel valve.
FAA holder: Burl's Aircraft LLC
Installation of a Time Trac Data Recorder.
FAA holder: P2 Incorporated
Installation of Aviation Development oil filter.
FAA holder: Aviation Development Corporation
Installation of Electronics International Inc. Glass Panel Engine Monitor (with In-Flight Data) MVP-50P.
FAA holder: Electronics International Inc.
Installation of a remote spin-on oil filter adapter. (GC-1B w/Lycoming or Cont 360 engine installed).
FAA holder: Aviation Development Corporation
Install Ceconite 101 fabric.
FAA holder: Aviation Products Systems Inc.
Installation of Cleveland Main Wheels 40-28 and brakes 30-19.
FAA holder: Aero Fabricators Co
Installation of Cleveland based hydraulic toe brake rudder pedal system.
FAA holder: Aero Fabricators Co
Installation of vortex generators on the wings and tail surfaces.
FAA holder: Micro AeroDynamics Inc
Installation of Aero Enhancements UV250-1 Supplemental Instrument Panel Lightning System.
FAA holder: Aero Enhancements Inc.
Installation of Precise Flight, Inc. stand-by vacuum system (SVS).
FAA holder: Precise Flight Inc
Installation of Electronics International Model FP-5 or FP-5L fuel flow/fuel pressure instrument as a replacement instrument.
FAA holder: Electronics International Inc.
Installation of a PXE7300SR, In-Flight Entertainment System.
FAA holder: PS Engineering Incorporated
Installation of fiberglass covering. (M-62 SERIES PT-19) (G-73 SCHWEIZER).
FAA holder: Razorback Fabrics Inc
Installation of M-20 Oil Separator, model 600-WP.
FAA holder: M-20 Oil Separators LLC
Installation of Inspection Covers over the wing front spar.
FAA holder: Ronald S. Piercy dba Rainbow Flying Service
Installation of Truboplus/ Electronics Int'l gauges and switches.
FAA holder: Aero Manufacturing Inc.