Aircraft STC directory
Cessna Aircraft 180J STCs
The Jun 30, 2026 FAA DRS snapshot contains 99 selected supplemental type certificates with status Current whose public applicability data names the Cessna Aircraft 180J. Use it to identify modification scope and recorded holders—not to determine serial-number effectivity, compatibility, installation approval, or commercial availability.
Modification demand surface
Recorded holders
Recently revised 180J STCs
Showing the 99 most recently revised records. Each entry links to the FAA source and separates public approval data from private commercial claims.
Installation of L-3 Communications Avionics Systems.
FAA holder: Acron Aviation Inc.
Installation of Snider speed kit.
FAA holder: Snider Aircraft Accessories Inc.
Installation of Aqua Model 180-85 floats.
FAA holder: Outpost X Aviation Inc.
Installation of alternate electro-hydraulic power pack system for operation of main wheel skis.
FAA holder: F.Atlee Dodge Aircraft Services
Installation of CT-3000 tail ski on airplanes equipped with Scott 3200 or 3400 tail wheels.
FAA holder: F.Atlee Dodge Aircraft Services
Replace existing horizontal stabilizer skins.
FAA holder: Athena Aircraft, LLC
Install Cleveland wheel and brake conversion kit, P/N 199-60.
FAA holder: KAMAN Corporation Aircraft Wheel and Brake LLC
Install Cleveland wheel and brake conversion kit, P/N 199-62.
FAA holder: Kaman Corporation Aircraft Wheel and Brake LLC
Installation of FlightLogic Synthetic Vision Electronic Flight Information System (EFIS-SV).
FAA holder: Genesys Aerosystems Inc.
Installation of EDO model 249-2870 floats.
FAA holder: Kenmore Air Harbor Inc
Float door cover installation on EDO Model Numbers 249-2870, 249A-2870, and 628-2960 Floats.
FAA holder: Kenmore Air Harbor LLC
Installation of large (8.5 x 6) tires on Cleveland Wheels.
FAA holder: Kenmore Air Harbor Inc
Modification to increase gross weight to 3,190 lbs of landplane, or seaplane.
FAA holder: Kenmore Air Harbor LLC
Installation of an air/oil separator.
FAA holder: Airwolf Filter Corporation
Incorporation of bushing on carburetor hot air box control arm.
FAA holder: Dynamic Propeller
Installation of steel main landing gear.
FAA holder: Mr. Thomas Anderson
Fabrication and Installation of interior fiberglass trim panels.
FAA holder: Selkirk Aviation
Installation of Dynamic Propellers carburetor heat air box top skin.
FAA holder: Dynamic Propeller
Installation of Dynamic Propellers support brackets.
FAA holder: Dynamic Propeller
Fabrication and installation of Dynamic Propeller Cowl Flap Support Kit.
FAA holder: Dynamic Propeller
Installation of Domed (Bubble) Window.
FAA holder: Great Lakes Aero Products Inc
Installation of GX50/60 GPS Navigator, Capstone configured MX20 Multi-Function Display and UAT transceiver.
FAA holder: Garmin International Inc
Install SAF-T-STOP auxiliary seat stop device.
FAA holder: Glen A Florence, Aero Technologies, Inc.
Installation of 1-5 overhead skylights.
FAA holder: Cub Crafters Inc
Installation of the Skyote Gap Flap System. (180 SERIES).
FAA holder: Otto E. Bartoe Jr.
Fabrication and installation of Stabilizer Jack-Screw Actuator in accordance with North Pacific Welding Drawing Number C-0712500, dated March 31, 2000 and Cessna Skywagon 180 and 185 Series Service Manual; or McFarlane Aviation, Inc., Drawing 1111-1, revision original, dated June 1, 2010 or later FAA approved revisions.
FAA holder: McFarlane Aviation, Inc.
Installation of flight strobe light, Model 4400.
FAA holder: Universal Corporation
Installation of fiberglass nosebowl.
FAA holder: Selkirk Aviation
Installation of fiberglass extended baggage compartment.
FAA holder: Selkirk Aviation
Fabrication and Installation of composite engine cowling.
FAA holder: Selkirk Aviation
Installation of FlightLogic Synthetic Vision Electronic Flight Information System (EFIS-SV).
FAA holder: Chelton Flight Systems Inc.
Installation of a firewall mounted battery tray and heat shield.
FAA holder: Burl's Aircraft LLC
Installation of Glareshield per FAA Approved Ashby Glareshield Master Drawing List.
FAA holder: Aircraft Spruce and Specialty Co.
Installation of Horizontal Stabilizer Screw-on Leading Edge.
FAA holder: Tanalian Aviation Inc.
Installation of Jetton Alert II alarm system.
FAA holder: Jetton Aircraft
Installation of McCauley 2A34C203/90DCA-2 or 2A34C203/90DCA-8 propeller. (THRU S/N 18052770).
FAA holder: Northwest Propeller Services Inc.
Installation of a Shadin Co. fuel flow indicating system.
FAA holder: Shadin Avionics
Installation of vortex generators on wings, horizontal and vertical tail surfaces.
FAA holder: Micro AeroDynamics Inc
Installation of McvCauley Propeller Model D3A36C435/80VEA-0, and spinner assembly.
FAA holder: McCauley Propeller Systems
Installation of D3A34C401/90DFA -2, -4, -6, -8, and -10 propellers.
FAA holder: Air Plains Services Corporation
Replace Cessna fuel cell drain vavle assembly P/N 84C with Safe Air Repair P/N SAR-2.
FAA holder: Aero Fabricators Co
Installation of flap and aileron gap seals.
FAA holder: Aircraft Development Co
Modification of the main landing gear bulkhead to improve static strength and fatigue characteristics.
FAA holder: Aircrafters of Enterprise Inc
Installation of Seaplanes West Replacement Engine Mount.
FAA holder: Seaplanes West Inc.
Install 300 series dry vacuum pump conversion kits.
FAA holder: Parker Hannifin Corp
Installation of modified control yoke and instrument panel.
FAA holder: Trevor Burward-Hoy
Installation of Fibre Glass Reinforced Plastic Nacelle Fairing, Trade Name 'Exhaust Fairing".
FAA holder: Maple Leaf Aviation Ltd
Installation of Texas Skyways engine mount.
FAA holder: Texas Skyways Inc
Installation of modified engine and propeller system.
FAA holder: Texas Skyways Inc
Installation of an engine electronic digital tachometer, Model P-1000.
FAA holder: Horizon Instruments Inc
Installation of 76 vortex generators and 2 small delta wings on the upper surface of the wings.
FAA holder: Aeronautical Testing Service Inc.
Installation of a modified Teledyne Continental O-470-U engine.
FAA holder: Texas Skyways Inc
Installation of recognition lights on horizontal stabilizer.
FAA holder: DeVore Aviation Corporation of America, a New Mexico Corporation