SA01330LAAvionics
Installation of alternate avionics support assembly.
FAA holder: Radiorax Aviation Systems LLC
Aircraft STC directory
Cessna Aircraft TR182 STCs
The Jun 30, 2026 FAA DRS snapshot contains 64 selected supplemental type certificates with status Current whose public applicability data names the Cessna Aircraft TR182. Use it to identify modification scope and recorded holders—not to determine serial-number effectivity, compatibility, installation approval, or commercial availability.
64
listed Current at snapshot
35
holder directories
9
modification categories
Dec 13, 2024
latest recorded revision
Modification demand surface
Other aircraft modifications31
Flight controls12
Avionics4
Cabin and interiors4
Engine and powerplant3
Aircraft structures3
Fuel systems3
Propellers3
Electrical systems1
Recorded holders
Brittain Industries, Inc6Knots 2U Ltd.4Technisonic Industries Limited3Aircraft Development Co3Curry Aviation LLC2Flight Boss Ltd.2McFarlane Aviation Inc2John Jewell Aircraft Inc2Aerographics Inc.2S-TEC Corporation2Athena Aircraft, LLC1Aero-Mach Wilco LLC1Airwolf Filter Corporation1CAV Ice Protection Inc1G & D Aero Products Inc.1Aerotech Components Inc1Flint Aero Inc1ROCKY TOP LEASING INC.1Hartzell Propeller Inc1Selkirk Aviation1
Recently revised TR182 STCs
Showing the 64 most recently revised records. Each entry links to the FAA source and separates public approval data from private commercial claims.
View record
SA00406WIFlight controls
Installation of replacement flap trailing edge bulbs with AOG Drawing.
FAA holder: Athena Aircraft, LLC
SA950CEFlight controls
Installation STOL kits (wing leading edge cuffs, drooped tips, stall fences and aileron gap seals).
FAA holder: Curry Aviation LLC
SA00753WIOther aircraft modifications
Installation of the Concorde VRSLA (RG-24-15, RG-24-16, RG-35AXC and RG-35A) batteries.
FAA holder: Aero-Mach Wilco LLC
SA02415CHFlight controls
Installation of Flight Boss LTD S-RPE-CN Rudder Pedal Extensions.
FAA holder: Flight Boss Ltd.
SA4440NMOther aircraft modifications
Installation of an air/oil separator.
FAA holder: Airwolf Filter Corporation
SA777GLEngine and powerplant
Installation of a cooling shroud on engine driven dry air pumps.
FAA holder: McFarlane Aviation Inc
SA01338WIOther aircraft modifications
Installation of TKS Ice Protection System Components, with placard stating, 'INTENTIONAL FLIGHT INTO KNOWN ICING IS PROHIBITED'.
FAA holder: CAV Ice Protection Inc
SA02248LAElectrical systems
Installation of Sensor Pod and wiring for a passenger operated monitoring system.
FAA holder: Sky IMD Inc
SA1383WEOther aircraft modifications
Installation of Brittain Industries Pitch Assist Model PC-1 with Altitude Hold.
FAA holder: Brittain Industries, Inc
SA361WEOther aircraft modifications
Installation of Brittain Pneumatic Pitch Assist Model PC-1.
FAA holder: Brittain Industries, Inc
SA97WEAvionics
Autopilot and optional nav-coupler 'add-on' BI-300, BI-301, or BI-304.
FAA holder: Brittain Industries, Inc
SA525WEAvionics
Installation of Brittain Industries, Inc. Model B-4 Flight Control System including PC-1 Pitch Assist, Model AH-1 Altitude Hold and NAV-1 Navigation Coupler.
FAA holder: Brittain Industries, Inc
SA1384WEOther aircraft modifications
Installation of Brittain Industries Model CSA-1 Stability Augmentation System.
FAA holder: Brittain Industries, Inc
SA1474WEFlight controls
Installation of Brittain Industries Model B2C Flight Control System.
FAA holder: Brittain Industries, Inc
SA1815NMAircraft structures
Installation of Lompoc Aero Specialties inner plexiglass pane in swing out window frames presently employing a single window.
FAA holder: G & D Aero Products Inc.
SA475CHOther aircraft modifications
Installation of Inline Air Filter Kit, P/N CV1J4-C.
FAA holder: Aerotech Components Inc
SA1758WEFuel systems
Installation of one 12-gallon auxiliary fuel tank in each wing inboard of tip.
FAA holder: Flint Aero Inc
SA10106SCOther aircraft modifications
Installation of R134 vapor cycle air conditioning system.
FAA holder: ROCKY TOP LEASING INC.
SA03078CHPropellers
Installation of Hartzell HC-(C,I,F)3YR-1(A)RF/F8068(K) or HC-(C,I,F)3YR-1(A)RF/F7693F(K)+2 propeller.
FAA holder: Hartzell Propeller Inc
SA01518ATPropellers
Installation of a McCauley C234C204/90DCB-8 propeller to a Teledyne Continental Motors Model O-470-U modified.
FAA holder: John Jewell Aircraft Inc
SA01581ATPropellers
Installation of a McCauley C234C204/90DCB-8 propeller to a Teledyne Continental Motors Model O-470-U modified.
FAA holder: John Jewell Aircraft Inc
SA01569WIOther aircraft modifications
Installation of two tinted, flush cockpit skylights.
FAA holder: Yingling Aircraft Inc
SA02359AK-DOther aircraft modifications
Fabrication and installation of F. Atlee dodge Aircraft Services, Cessna Tie-Down clamp.
FAA holder: F. Atlee Dodge Aircraft Services, LLC
SA1474GLCabin and interiors
Install Aero Fabricators shoulder harness and seat belt assembly.
FAA holder: Aero Fabricators Co
SA01834CH (1 OF 2)Other aircraft modifications
Installation of the High Intensity Discharge Light Assembly Kit.
FAA holder: Knots 2U Ltd.
SA02411CHCabin and interiors
Installation of the Aero Vent Cabin Ventilation System.
FAA holder: Knots 2U Ltd.
SA00272WIOther aircraft modifications
Replacement of hydraulic system pressure switch.
FAA holder: APPH Wichita Inc.
SA10005SCOther aircraft modifications
Installation of airflow register into baggage compartment cover and insert a screened vent into empennage inspection plate.
FAA holder: Plane Plastics Ltd.
SA5602SWOther aircraft modifications
Installation of electrically driven vacuum pump.
FAA holder: Aero Safe Corporation
SA01170NYOther aircraft modifications
Installation of NPX138N-XXX FM Transceiver.
FAA holder: Northern Airborne Technology Ltd
SA02497CHOther aircraft modifications
Installation of the Knots 2U Flight Lite System.
FAA holder: Knots 2U Ltd.
SA01119CHOther aircraft modifications
Replace Cessna Sun visor assemblies with Aircraft Recycled Flying controls tinted Sun Visor Assemblies.
FAA holder: Plane Plastic Ltd
SA00812NYOther aircraft modifications
Installation of Technisonic Industries Limited TFM-138, A, and B (does not include TFM-138, s/n 1540 and up, TFM-138B, s/n 1500 and up).
FAA holder: Technisonic Industries Limited
SA01323WIFlight controls
Installation of flap gap seal per Aircraft Development Co. Drawing List 114-1 stamped FAA approved with a date of April 27, 2005 or later. Conformity data for Drawing List 114-1 is derived from Drawing List 114-1 Revision C and STC s SA1484CE, SA1490CE, SA1491CE, SA1492CE, SA1493CE, SA1494CE, and SA1495CE.
FAA holder: Aircraft Development Co
SA01328LAAircraft structures
Modification of right hand side door to provide an openable window.
FAA holder: Ellis & Associates CADD/Technical Illustrations
SA01951NY-DOther aircraft modifications
Installation of Wulfsberg P-2000 and/or C-2000-RT-2000 transceiver system.
FAA holder: Wulfsberg Electronics Division
SA1494CEFlight controls
Installation of flap and aileron gap seals.
FAA holder: Aircraft Development Co
SA2454CEFuel systems
Installation of fuel inlets and caps. (TR182 S/N R18200584 THRU R18202032) (T182 S/N 18266591 THRU18268542).
FAA holder: Hartwig Aircraft Fuel Cell Repair
SA5-12Cabin and interiors
Installation of canvas hammock seat.
FAA holder: Stoots Aviation/David A. Stoots
SA00424SEOther aircraft modifications
Installation of Precise Flight Model 100(electric) Speedbrake System.
FAA holder: Precise Flight Inc
SA02717ATEngine and powerplant
Conversion of Cessna Model TR182 to Model R182 by removal of Cessna installed turbocharger and related systems, and replacement of engine model Lycoming O-540-L3C5D with O-540-J3C5D. Conversion in accordance with AvPower Master Parts List AP1010-4 dated June 4, 2003 or later FAA approved revision. This is a one time STC valid for Cessna Aircraft Model TR182 Serial Number R18201980 only.
FAA holder: AvPower
SA00921NYOther aircraft modifications
Installation of a digital encryption device and global wolfsburg RT-9600 VHF/FM communications transceiver.
FAA holder: Aerographics Inc.
ST01153NY-DFlight controls
Installation of Eaton Corporation control/annunciator panel. These STCs must be installed prior to installation of this STC: ST1433CE (Bendix King KFC/200 Flight Control System) and SA2058CE-D (Aileron Servo Disable Switch Installation).
FAA holder: Aerographics Inc.
SA00861WIEngine and powerplant
Installation of Lycoming IO-540-K1A5 or IO-540-K1G5 engine and Hartzell HC-C3YR-1RF/8468-6R or HC-C3YR-IRF/8468AB-6R propeller.
FAA holder: Air Plains Services Corporation
SA00419NYOther aircraft modifications
Installation of cockpit utility light.
FAA holder: Burns Richard G
SA1005SCOther aircraft modifications
Installation of airflow register into baggage compartment cover and insert a screened vent into empennage inspection plate.
FAA holder: Soros, Inc
SA01074WIFlight controls
Installation of McFarlane Aviation Flap Roller Assembly Service Kit MCSK100.
FAA holder: McFarlane Aviation, Inc.
SA01456NYOther aircraft modifications
Installation of Technisonic Industries Ltd OSAT-100 Airborne Position/Data Communicator.
FAA holder: Technisonic Industries Limited
SA2-1178Cabin and interiors
Replacement of right front seat with stretcher.
FAA holder: Aviation Fabricators Inc
SA01407NYOther aircraft modifications
Installation of Airborne Position/Data Communicator.
FAA holder: Technisonic Industries Limited
SA00425DEAvionics
Installation of model FB-02 'Fixed Arm' Pilot Arm Rest on R/H side of pilot seat and optional GPS Support Arm System.
FAA holder: Quality Aircraft Components LC
SA00165SEOther aircraft modifications
Installation of 76 vortex generators and 2 small delta wings on the upper surface of the wings.
FAA holder: Aeronautical Testing Service Inc.
SA8898SW-DFlight controls
Installation of S-TEC System 55 Two Axis Automatic Flight Guidance System, Model ST-569, with Optional Automatic Electric Trim System.
FAA holder: S-TEC Corporation
SA01280CHOther aircraft modifications
Installation of Challenger Spin-On Oil Filters.(For Cessna 182 model, s/n 67042 and up) (For Cessna 421C model, s/n 1017 thru 1404).
FAA holder: D & K Aviation
SA00834SEOther aircraft modifications
Installation of vortex generators on wings and tail surfaces.
FAA holder: Micro AeroDynamics Inc
SA00270WIAircraft structures
Installation of fiberglass replacement wing tips.
FAA holder: Aircraft Development Co
SA09436AC-DOther aircraft modifications
Installation of S-TEC System 40X/50X Single and Two Axis Automatic Flight Guidance Systems, Model ST-785-40X-50X.
FAA holder: S-TEC Corporation
SA3349WEOther aircraft modifications
Installation of recognition lights on horizontal stabilizer.
FAA holder: DeVore Aviation Corporation of America, a New Mexico Corporation