SA4-1629Fuel systems
Installation of wing tip fuel tanks.
FAA holder: General Aviation Modifications Inc.
Aircraft STC directory
Hawker Beechcraft 35R STCs
The Jun 30, 2026 FAA DRS snapshot contains 24 selected supplemental type certificates with status Current whose public applicability data names the Hawker Beechcraft 35R. Use it to identify modification scope and recorded holders—not to determine serial-number effectivity, compatibility, installation approval, or commercial availability.
24
listed Current at snapshot
8
holder directories
9
modification categories
Feb 7, 2020
latest recorded revision
Modification demand surface
Other aircraft modifications6
Aircraft structures4
Engine and powerplant4
Fuel systems3
Flight controls2
Avionics2
Propellers1
Aircraft performance1
Cabin and interiors1
Recently revised 35R STCs
Showing the 24 most recently revised records. Each entry links to the FAA source and separates public approval data from private commercial claims.
View record
SA1493WEFlight controls
Installation of Brittain Industries, Inc. Model B2C Flight Control System.
FAA holder: Brittain Industries, Inc
SA2633WEAircraft structures
Installation of enlarged window and baggage compartment.
FAA holder: D'Shannon Products Ltd.
SA5721NMPropellers
Installation of replacement cockpit control knobs for throttle, mixture, propeller,parking brake, heater, cowl flaps.
FAA holder: D'Shannon Products Ltd.
SA2375CEAvionics
Installation of B&D Instruments & Avionics, Inc. Electronic Tachometer System. Data required: (1) B&D Instruments & Avionics, Inc. Installation Manual Part No. 0535-003-011, Rev. B, or later FAA Approved revision; and (2) copy of this certificate.
FAA holder: Teledyne Controls
SA09337SCAircraft performance
An increase gross weight of 100lbs for Beech models A35, B35, C35, D35, E35, F35, G35, and 35R when equipped with Vortex Generators per J.V.E., Inc., STC SA09145SC.
FAA holder: D'Shannon Products Ltd.
SA23EACabin and interiors
Installation of Third Cabin Window on both sides of Fuselage in accordance with Glenn Floyd Stauffer Drawing Nos. 42601, Revision A dated 31 May 1962 and 42602, Revision A dated 13 June 1962.
FAA holder: D'Shannon Products Ltd.
SA2653SWAvionics
Installation of Instrument Panel in accordance with 1998-54 Installation Manual and Drawings 1998A200, 1998A300, 1998A400, and 1999 all dated July 1, 1977; Battery Box Kit per 1998-84 Installation Manual and Drawing 2000 dated July 1, 1977; Radio Cooling Kit per 1998-86 Installation Manual and Drawing 2002 each dated July 1, 1977.
FAA holder: D'Shannon Products Ltd.
SA2771WEOther aircraft modifications
Installation of Long Fiberglass tailcone to replace the short factory installed tailcone in accordance with FAA Sealed N.E. Coote Tool and Machine Drawing List Report No. 1 dated September 2, 1970.
FAA holder: D'Shannon Products Ltd.
SA808SOFuel systems
Installation of Beryl D Shannon Aviation Specialists, Inc., Fiberglass tip tanks (15 gallons each) and fuel transfer system in accordance with Beryl D Shannon Aviation Specialists, Inc., Installation Kit Drawing KB1401, Rev E, dated May 19, 1977, or later FAA approved revisions. Drawing KB1401 Revision F, dated April 12, 1979, includes optional wing-tip anti-collision light installation. This STC requires operation in the Normal Category.
FAA holder: D'Shannon Products Ltd.
SA930SOAircraft structures
Installation of Beech Aircraft wing tip assemblies in accordance with Beryl D Shannon Aviation Specialties, Inc., Drawing B1990, dated December 15, 1976, or later FAA approved revision.
FAA holder: D'Shannon Products Ltd.
SA838SOEngine and powerplant
Installation of Beryl D Shannon Aviation Specialties, Inc., Fiberglass Air Scoops (Inlet and Exit) in accordance with DLB 1500 dated June 6, 1974, or later FAA approved revision for the following models: T. C. A-777: Models A35 through C35, 35 and 35 R T. C. 3A15: Models H35 through V35.
FAA holder: D'Shannon Products Ltd.
SA942SOAircraft structures
Installation of Adjustable Directional Trim Device on lower aft fuselage (ventral Location) in accordance with Beryl D Shannon Aviation Specialties, Inc., drawing B15001, dated May 30, 1977, or later FAA approved revision.
FAA holder: D'Shannon Products Ltd.
SA2219WEEngine and powerplant
Installation of Filtrator Company Engine Crankcase Breather and Vacuum Pump Air-Oil Separator in accordance with the applicable FAA sealed drawing listed on the attached Master Eligibility List Number SA2219WE.Installation of Filtrator Company engine crankcase breather and vacuum pump air-oil separator.
FAA holder: D'Shannon Products Ltd.
SA3020WEEngine and powerplant
Installation of exhaust silencers in accordance with Top Banana Installation Instructions dated March 12, 1975, Revision of October 22, 1975. Silencer is manufactured in accordance with Top Banana Drawing No. 2-12-A35 G change.
FAA holder: D'Shannon Products Ltd.
SA09145SCAircraft structures
Installation of vortex generators on wing upper surfaces in accordance with J.V.E., Inc. Drawing List JVE-501, Revision IR, dated 01/05/96, and Installation Manual JVE-0596, Revision IR, dated 01/05/96, or later FAA approved revisions.
FAA holder: D'Shannon Products Ltd.
SA1-569Engine and powerplant
Installation of Continental IO-470-J engine (fuel injection) and Hartzell BHC-92ZF-lDl / 8447 propeller in accordance with Stauffer drawing No. 7 dated May 2, 1961, and Stauffer Flight Manual Supplement No. 7, FAA approved May 5, 1961.
FAA holder: D'Shannon Products Ltd.
SA2858WEOther aircraft modifications
Installation of right and/or left hand cockpit side windows in accordance with FAA sealed Beryl D Shannon Aviation Specialties, Inc. Drawing List DLB -1301.
FAA holder: D'Shannon Products Ltd.
SA4196SWOther aircraft modifications
Installation of one piece windshield according to Blue Star Conversion One Piece Windshield Installation, Rev. 2, dated 3/28/80, or later FAA approved revision.
FAA holder: D'Shannon Products Ltd.
SA03913ATOther aircraft modifications
Installation of the Astronics LED Replacement Lighting Bulbs in accordance with Chippewa Aerospace Master Drawing List (MDL) No. P23-3340-01-0001, Rev. 1, Dated November 01, 2010, or later FAA approved revision.
FAA holder: Chippewa Aerospace, Inc.
SA1176SOFlight controls
Installation of Aileron and Wing Flap Gap Seals.
FAA holder: D'Shannon Products Ltd.
SA01155ATFuel systems
Installation of left hand and right hand auxiliary fuel cell assemblies.
FAA holder: FFC Manufacturing
SA2160NMOther aircraft modifications
Installation of the Precise Flight stand-by vacuum system (SVS).
FAA holder: Precise Flight Inc
SA00785SEOther aircraft modifications
Installation of vortex generators on the wings and tail surfaces in accordance with Micro AeroDynamics Drawing Package MA2125, Revision IR, dated January 18, 2000, and Installation Manual MA2126, Revision IR, dated January 21, 2000, or later FAA approved revisions.
FAA holder: Micro AeroDynamics Inc