SA2133NMLanding gear and brakes
Installation of fully enclosed main landing gear doors.
FAA holder: Raisbeck Engineering Inc.
Aircraft STC directory
Hawker Beechcraft B90 STCs
The Jun 30, 2026 FAA DRS snapshot contains 44 selected supplemental type certificates with status Current whose public applicability data names the Hawker Beechcraft B90. Use it to identify modification scope and recorded holders—not to determine serial-number effectivity, compatibility, installation approval, or commercial availability.
44
listed Current at snapshot
20
holder directories
10
modification categories
Sep 1, 2023
latest recorded revision
Modification demand surface
Avionics8
Fuel systems8
Landing gear and brakes5
Engine and powerplant5
Other aircraft modifications5
Cabin and interiors4
Aircraft structures3
Cargo and special mission3
Flight controls2
Electrical systems1
Recorded holders
FFC Manufacturing9Textron Aviation Inc4Hawker Beechcraft Services Inc.4Raisbeck Engineering Inc.3Aviation Fabricators Inc3Kaman Corporation Aircraft Wheel and Brake LLC2Spectrum Aeromed LLC dba Spectrum Aeromed2American Aviation Inc2Rosen Sunvisor Systems LLC2Sandel Avionics LLC1Rockwell Collins Inc1Garmin International Inc1SRS Aviation LLC1Micro AeroDynamics Inc1Airline Fueling Inc.1Teledyne Battery Products1Blackhawk Modifications Inc.1Avcon Industries Inc1Saint-Gobain Performance Plastics Corp1Quiet Flight LLC1
Recently revised B90 STCs
Showing the 44 most recently revised records. Each entry links to the FAA source and separates public approval data from private commercial claims.
View record
SA2623NMLanding gear and brakes
Installation of fully enclosed main landing gear door system and associated actuation mechanism.
FAA holder: Raisbeck Engineering Inc.
SA4010NMAircraft structures
Installation of lower aft fuselage strakes.
FAA holder: Raisbeck Engineering Inc.
SA1077GLLanding gear and brakes
Replace existing nose wheel with Cleveland nose wheel P/N 40-204.
FAA holder: KAMAN Corporation Aircraft Wheel and Brake LLC
SA619GLLanding gear and brakes
Installation of Parker Hannifin Main Wheel and Brake Kit Part Numbers 199-90.
FAA holder: Kaman Corporation Aircraft Wheel and Brake LLC
ST01930LAAvionics
Installation of Sandel Avionics SN4500 Electronic Horizontal Situation Indicator (EHSI).
FAA holder: Sandel Avionics LLC
SA01213CHCargo and special mission
Install air ambulance conversion in accordance with Spectrum Aeromed Inc. Drawings as listed on AML SA01213CH, or later FAA approved revision.
FAA holder: Spectrum Aeromed LLC dba Spectrum Aeromed
SA1612GLCargo and special mission
Install air ambulance . conversion.
FAA holder: Spectrum Aeromed LLC dba Spectrum Aeromed
SA537CEAvionics
Installation of Collins AP-103F/FD108 and AP-103F/FD109G Autopilot and flight director. (65-A90 WITH 90-4031 KIT).
FAA holder: Textron Aviation Inc
SA567CEAvionics
Installation of Collins AP-103F/FD108 and AP-103F/FS108G,AP-103F/FD109G autopilot and flight director. (65-A90 WITH 90-4031 KIT).
FAA holder: Textron Aviation Inc
SA569CEFlight controls
Installation of Collins AP104/FD109H Flight Control System.
FAA holder: Textron Aviation Inc
SA603CEFlight controls
Installation of Collins AP-104/FD-109F Flight Control System.
FAA holder: Textron Aviation Inc
SA01472WI-DAvionics
Modification of a Rockwell Collins Weather Radar System installation.
FAA holder: Rockwell Collins Inc
SA02676CHAircraft structures
Installation of left and right hand fuselage external doublers per attached FAA Approved Model List (AML) No SA02676CH, issued June 8, 2011, or later FAA approved revision.
FAA holder: SRS Aviation LLC
SA02098SEEngine and powerplant
Installation of vortex generators on the wings and tail surfaces and strakes on the engine nacelles.
FAA holder: Micro AeroDynamics Inc
SA4157SWCabin and interiors
Install one, two, or three place side facing seat (frame only).
FAA holder: Aviation Fabricators Inc
SA1177SWLanding gear and brakes
Installation of revised main landing gear doors.
FAA holder: Airline Fueling Inc.
SA1017SOElectrical systems
Replace existing nickel- cadmium battery with Gill Teledyne BB638/T series lead-acid battery.
FAA holder: Teledyne Battery Products
SA01146ATFuel systems
Installation of left hand side and right hand side leading edge fuel cell assemblies. (F90 S/N LJ1 AND UP, 99 ALL S/N'S, B100 S/N B1-89 AND UP, 65-B80 S/N LD-151 AND UP).
FAA holder: FFC Manufacturing
SA01626AT-DFuel systems
Installation of replacement fuel cell assemblies.
FAA holder: FFC Manufacturing
SA00865AT-DFuel systems
Installation of replacement fuel cell assemblies.
FAA holder: FFC Manufacturing
SA0912AT-DFuel systems
Installation of replacement fuel cell assemblies.
FAA holder: FFC Manufacturing
SA10560SCFuel systems
Installation of Wing Mounted Auxiliary Fuel Transfer Tank.
FAA holder: Blackhawk Modifications Inc.
SA01004ATEngine and powerplant
Installation of right hand side nacelle fuel cell assembly.
FAA holder: FFC Manufacturing
SA01191ATFuel systems
Installation of Left Hand and Right Hand Box Section Inboard Fuel Cell Assemblies. (E90, F90, B100, B200 ALL S/N'S, 65-B80 S/N LC230 AND UP, LD280 AND UP).
FAA holder: FFC Manufacturing
SA01203ATFuel systems
Installation of left-hand side and right-hand side center section fuel cell assemblies.
FAA holder: FFC Manufacturing
SA01251ATEngine and powerplant
Installation of left hand and right hand nacelle fuel cell assemblies. (E90 ALL S/N'S, F90 S/N LA2 AND UP).
FAA holder: FFC Manufacturing
SA00728AT-DFuel systems
Installation of replacement fuel cell assemblies.
FAA holder: FFC Manufacturing
SA02963CHCabin and interiors
Cargo interior modification of Beech 90 Series King Air in accordance with Aerospace Resources drawing 20-0090-1, Revision -, dated April 24, 2009, or later FAA approved revision.
FAA holder: Aerospace Resources Inc.
SA00872SEEngine and powerplant
Installation of modified ram air engine induction system (Option I or Option II).
FAA holder: American Aviation Inc
SA1726CECargo and special mission
Installation of camera window with sliding door cover and drift sight.
FAA holder: Avcon Industries Inc
SA2630CEOther aircraft modifications
Installation of a four-place side facing divan.
FAA holder: Aviation Fabricators Inc
SA2361CEOther aircraft modifications
Install dynamic acoustic absorbers.
FAA holder: Aircraft Acoustics Inc
SA2777CECabin and interiors
Install passenger seat with hinged backrest.
FAA holder: Aviation Fabricators Inc
SA09896SCAvionics
Installation of a Honeywell KMH-880 Multi-Hazard Awareness System with a Multi-Function Display (MFD), an operational portion of the Honeywell IHAS 8000 (Integrated Hazard Awareness System), resulting in a Traffic Advisory System (TAS) and an Enhanced Ground Proximity Warning System (EGPWS) to reduce the likelihood of controlled flight into terrain and/or collision with another aircraft.
FAA holder: Hawker Beechcraft Services Inc.
SA09898SCAvionics
Installation of a Garmin GPS-400 Global Positioning System (GPS).
FAA holder: Hawker Beechcraft Services Inc.
SA09899SCAvionics
Installation of a Garmin GPS-400 Global Positioning System (GPS).
FAA holder: Hawker Beechcraft Services Inc.
SA09908SCCabin and interiors
Installation of a 110 VAC Inverter with two (2) 110 VAC outlets in the cabin. Modifications.
FAA holder: Hawker Beechcraft Services Inc.
SA37GLOther aircraft modifications
Installation of Norton radome kit No. 2090XS.
FAA holder: Saint-Gobain Performance Plastics Corp
SA5138NMAircraft structures
Installation of transparent window shields.
FAA holder: Rosen Sunvisor Systems LLC
SA5139NMOther aircraft modifications
Installation of sun visor.
FAA holder: Rosen Sunvisor Systems LLC
SA00482DEOther aircraft modifications
Installation of an Aircraft Noise Control (ANC) System.
FAA holder: Quiet Flight LLC
SA00686SEEngine and powerplant
Installation of American Aviation, Inc., engine exhaust stacks.
FAA holder: American Aviation Inc