Installation of an X cam Pod.
FAA holder: J & C Engineering Services LTD
Aircraft STC directory
Textron Aviation 182C STCs
The cited FAA DRS record snapshots contain 40 selected supplemental type certificates with status Current whose public applicability data names the Textron Aviation 182C. Use it to identify modification scope and recorded holders—not to determine serial-number effectivity, compatibility, installation approval, or commercial availability.
40
listed Current at snapshot
27
holder directories
10
modification categories
Jul 7, 2026
latest recorded revision
Modification demand surface
Recorded holders
McFarlane Aviation LLC3Curry Aviation LLC3Hartzell Propeller LLC2Hartzell Propeller Inc2Sierra Industries Ltd.2Air Plains Services Corporation1Icarus Aero Inc.1Rosen Sunvisor Systems LLC1Petersen Aviation Inc1Sealand Aviation Ltd1Burl's Aircraft LLC1FTG, Inc.1Athena Aircraft, LLC1Airfilm Camera Systems1Beringer Aero1Power Flow Systems Inc.1Del-Air1S-TEC Corporation1Aerosonic Corporation1Airglas Inc.1
Recently revised 182C STCs
Showing the 40 most recently revised records. Each entry links to the FAA source and separates public approval data from private commercial claims.
View record
Installation of Teledyne Continental Motors Model IO-520-D engine and either a McCauley Model D3A34C401/90DFA-10 or Hartzell Model PHC-C3YF-1RF/F8468A( )-6R or PHC-C3YF-1RF/F7691( ) or PHC-G3YF-1RF/F8468A( )-6Ror PHC-G3YF-1RF/F7691( ) 3-blade propeller.
FAA holder: Air Plains Services Corporation
Replacement of Rudder and Elevator Hinge Bearings with P. Ponk Aviation Bearing p/n PPA-1401.
FAA holder: McFarlane Aviation LLC
Installation of Hartzell Propeller model HC-(C,G,J)3YF-1N/NM8411-( ).
FAA holder: Hartzell Propeller LLC
Installation of cockpit sunvisors.
FAA holder: Rosen Sunvisor Systems LLC
Installation of Hartzell propeller model DHC-G2YF-1BFP/F8068+2 and applicable spinner.
FAA holder: Hartzell Propeller Inc.
Installation of sky dive step and door modification.
FAA holder: Sealand Aviation Ltd.
Installation of Alternate Fuel outlet screens per Installation Instructions.
FAA holder: Burl's Aircraft LLC
Installation of elevator trim wheel assembly in place of the type certificated trim wheel assembly in accordance with QMI, Inc. Trim Wheel Installation Instructions for Cessna 180, Early 182, and 185 Aircraft, Rev Level A, dated November 1, 2019, or later FAA approved revision.
FAA holder: McFarlane Aviation LLC
Installation of a Ski Tube compartment extending aft of the baggage compartment.
FAA holder: Athena Aircraft, LLC
Installation of wing leading edge cuffs and tips.
FAA holder: Curry Aviation LLC
Add wing strut fairings and contour wing struts.
FAA holder: Curry Aviation LLC
Installation of Airfilm Wing Strut Utility Mount.
FAA holder: Airfilm Camera Systems
Installation of Teledyne Continental IO-470 engine modified to incorporate a carburetor system.
FAA holder: Aerotec Engines Limited
Installation of replacement engine exhaust system.
FAA holder: Power Flow Systems Inc.
Installation of a Tail Tie-Down Assembly.
FAA holder: Middle Forks Mod LLC
Provisions for the installation of a wing strut mounted camera pod.
FAA holder: Wooding Geospatial Solutions
Installation of an S-TEC 01326 Digital Flight Control System (DFCS),.
FAA holder: S-TEC Corporation
Installation of flap actuated aileron droop system.
FAA holder: Sierra Industries Ltd.
Installation of Aerosonic SL114-9823 OASIS Standby Instrument System.
FAA holder: Aerosonic Corporation
Installation of leading edge cuff on each wing.
FAA holder: Stene Aviation Inc
Fabrication and installation of F. Atlee Dodge p/n 8008 Firewall Battery Box.
FAA holder: F. Atlee Dodge Aircraft Services, LLC
Installation of strut/wing and strut/fuselage fairings, lightning hole covers and aerodynamic putty.
FAA holder: Aircraft Development Co