Aircraft STC directory
Thrush Aircraft S2R-T11 STCs
The Jun 30, 2026 FAA DRS snapshot contains 25 selected supplemental type certificates with status Current whose public applicability data names the Thrush Aircraft S2R-T11. Use it to identify modification scope and recorded holders—not to determine serial-number effectivity, compatibility, installation approval, or commercial availability.
Modification demand surface
Recently revised S2R-T11 STCs
Showing the 25 most recently revised records. Each entry links to the FAA source and separates public approval data from private commercial claims.
Installation of a digital payload hopper quantity and spray boom pressure indicating system.
FAA holder: Reabe Design LLC
Installation of L-3 Communications Avionics Systems.
FAA holder: Acron Aviation Inc.
Installation of a Reabe Aircraft Improvement Power Gate Control System.
FAA holder: Reabe Design LLC
Installation of a Lever Throttle Quadrant.
FAA holder: Kawak Aviation Technologies Inc
Installation of a Kawak Aviation Technologies auxiliary system, and optional ancillary equipment.
FAA holder: Air Repair Inc.
Installation of Custom Air Innovations Titanium Tail Wheel and Assembly.
FAA holder: Custom Air Innovations LLC
Installation of a Pratt & Whitney PT6A-41, PT6A-42, or PT6A-42A engine and a Avia V508H/106B/A propeller.
FAA holder: Cascade Aircraft conversions LLC
To install full swiveling locking tail wheel assembly onto the existing spring steel tail gear.
FAA holder: Turbine Conversions Ltd
Installation of a ground single point fueling system.
FAA holder: Turbine Conversions Ltd
Installation of a replacement airframe fuel pump in accordance with Cascade Flying Service Master Drawing List FW-CFS545-90, Rev. B, dated October 19, 2011, or later FAA approved revision.
FAA holder: Cascade Aircraft conversions LLC
Installation of a Center Windshield.
FAA holder: Hershey Flying Services
Installation of a bonded doubler inside the wing leading edge.
FAA holder: Turbine Conversions Ltd
Installation of aluminum skins on the horizontal tail.
FAA holder: Aero Innovations LLC
Installation of aluminum skins on the horizontal tail.
FAA holder: Aero Innovations LLC
Installation of a pitot-type engine air intake.
FAA holder: Aero Innovations LLC
Installation of winglets.
FAA holder: Aero Spraying Service Inc.
Installation of under wing strap enhancer.
FAA holder: AG Aviation Innovations
Installation of vortex generators on the wing and tail surfaces of the above model aircraft.
FAA holder: Micro AeroDynamics Inc
Installation of modified Wing Spar Splice and Cap per Aeronautix Modification Kit.
FAA holder: Gulf Coast Ag Aircraft Sales and Maintenance
Installation of the E-Tec ET-107 System that uses a sequential 24V to 48V Fast Start in order to reduce turbine exhaust gas temperatures (EGT) during engine starts.
FAA holder: Air Repair Inc
Installation of Avenger Extended Performance Front Spar Enhancement Kit (new wing front spar lower capts, center splice and doublers).
FAA holder: Avenger Aircraft and Services
Installation of Pheromone Distribution Pod System.
FAA holder: Turbine Conversions Ltd
Installation of a Powered Hopper Lid and Auger System.
FAA holder: Reabe Design LLC