SA01746SEFlight controls
Fabrication and Installation of Electric Trim System.
FAA holder: McHugh Aviation Inc
FAA-listed STC holder
McHugh Aviation Inc STCs
The Jun 30, 2026 FAA DRS snapshot lists 14 selected supplemental type certificates with status Current under McHugh Aviation Inc. The records span 2 public aircraft directories and 6 modification categories. This is a research directory, not a claim that any specific kit or service is currently offered.
14
listed Current at snapshot
2
aircraft directories
6
modification categories
Apr 2, 2007
latest recorded revision
Modification mix
Other aircraft modifications5
Flight controls2
Landing gear and brakes2
Aircraft structures2
Engine and powerplant2
Propellers1
Aircraft represented
Recently revised records
Showing the 14 most recently revised records. Category directories provide the complete paginated discovery path.
View record
SA01747SEOther aircraft modifications
Fabrication and Installation of Leading Edge Landing/Taxi Light.
FAA holder: McHugh Aviation Inc
SA2635NMOther aircraft modifications
Modify airplane by extending wings 16 inches, relocating the ailerons and flaps 16 inches outboard and installing trailing edge inserts on the wings.
FAA holder: McHugh Aviation Inc
SA1153NWOther aircraft modifications
Installation of a pilot/static head (Piper P/N 69041-05) and associated systems in accordance with Simuflight, Seattle Installation Drawing No. SP-1000.
FAA holder: McHugh Aviation Inc
SA1158NWLanding gear and brakes
Installation of an auxiliary electric Hydraulic Pump System in accordance with Simuflight, Seattle Modification and Installation Procedure Instruction Report SS-900. NOTE: This system augments the existing manually operated hydraulic system for the landing gear and flap operation.
FAA holder: McHugh Aviation Inc
SA1244NWLanding gear and brakes
Installation of a machined wrought 2024-T351 tail wheel collar (Republic P/N 1126) in place of a die-forged 2014-T6 original part in accordance with Simuflight, Seattle Drawing Number SP-2000.
FAA holder: McHugh Aviation Inc
SA1261NWAircraft structures
Installation of remanufactured lower wing lift strut fittings in accordance with Simuflight, Seattle Report No. SP-300 and Drawing No. SP-3000.\n\nNote: This is a replacement of STOL (Republic) part number 17F11013.
FAA holder: McHugh Aviation Inc
SA2386WEAircraft structures
Installation of Simuflight, Seattle Part No. SP-4000-1 and SP-4000-2 Fiberglass Camber Wing Tips in accordance with Simuflight, Seattle Installation Instructions SP-400. Simuflight, Seattle FAA Approved Airplane Flight Manual Supplement dated September 12, 1983 is required.
FAA holder: McHugh Aviation Inc
SA5684NMEngine and powerplant
Installation of Lycoming GSO/IGSO-480 engine; Hartzell HC-A3V20 propeller; new nacelle and engine mount; modified front and rear spar and aft firewall; and associated systems.
FAA holder: McHugh Aviation Inc
SA5771NMFlight controls
Modify aft fuselage bulkhead and reroute aileron cables in order to extend baggage compartment floor.
FAA holder: McHugh Aviation Inc
SA615NWEngine and powerplant
Installation of Lycoming GO-435-C2B, GSO-IGSO-480 series, and GO-IGO-480 series engine with Hartzell HC-A2V20 and HC-A3VF series propellers; new nacelle and engine mount; modified front and rear spar and aft firewall; and associated systems.
FAA holder: McHugh Aviation Inc
SA815NWOther aircraft modifications
Installation of Cleveland disc type brakes.
FAA holder: McHugh Aviation Inc
SA915NWOther aircraft modifications
Installation of a South Wind Model 940 combustion heater.
FAA holder: McHugh Aviation Inc
SE914NWPropellers
Installation of a propeller governor adapter with a combination adapter/valve to provide propeller reversing control.
FAA holder: McHugh Aviation Inc