FAA STC category
Other aircraft modifications STCs
Current FAA supplemental type certificates outside the principal modification categories. This directory contains 11,382 selected records listed with status Current in their cited FAA DRS snapshots and links every entry to its source.
Installation of Target Towing Package and Carriage of ECM Pods.
FAA holder: Phoenix Air Group Inc
Installation of split cowl nose bowl.
FAA holder: WACO Classic Aircraft Corporation
Installation of sliding canopy.
FAA holder: WACO Classic Aircraft Corporation
Installation of a new interim crew rest for Delta Air Lines A330-200 aircraft in accordance with Northwest Aerospace Technologies, Inc. (NAT) Master Drawing List N0382-D10, Revision B, dated September 8, 2011 or later Federal Aviation Administration (FAA) approved revisions.
FAA holder: Northwest Aerospace Technologies Inc
Installation of an Executive Completion in accordance with Gulfstream Aerospace Index List GC522048011, Rev. A, dated September 13, 2011, or later FAA approved revision. FAA Approved Airplane Flight Manual Supplement GC52204M070, Rev. -, dated September 13, 2011 or later FAA approved revision is required.
FAA holder: Gulfstream Aerospace Corporation
Installation of Mid-Continents 4300-313 Gyro Horizon in accordance with FAA Approved Master Data List (MDL), Drawing No. 2010 99-3443000, Revision C , dated September 09, 2011, or later FAA approved revision; and FAA Approved Airplane Flight Manual Supplement, Document No. 2010, Revision A, dated September 07, 2011, or later FAA approved revision.
FAA holder: Mid Continent Instruments Inc.
Temporary removal of aircraft auxiliary power unit (APU).
FAA holder: Field Aviation Co, Inc
Manufacture of crew and passenger wedge windows.
FAA holder: Bell Helicopter Textron Inc.
Installation of one-piece windshield and relocation of compass.
FAA holder: D'Shannon Products Ltd.
Installation of Doyn swept-tail assembly kit 1400.
FAA holder: D'Shannon Products Ltd.
Remove existing windshield and install single piece windshield.
FAA holder: D'Shannon Products Ltd.
Installation of an Innovative Solutions & Support Duplex Altimetry System.
FAA holder: Airborne Maintenance & Engineering Services (AMES)
Installation of a Forward Vestibule with Flight Crew Sleeping Facility.
FAA holder: Gulfstream Aerospace Corporation
Installation of a Goodrich analog Transient Suppression Device (ATSD).
FAA holder: Simmonds Precision Products Inc
Modification of Rockwell Collins, Inc. VHF-4000 and VHF-4000E installations.
FAA holder: Rockwell Collins Inc
Installation of variable pitch control system in accordance with Devore Aviation Corporation Drawings DE-3300, Rev. F, dated 12/28/71, DE-3301, Rev. C, dated 11/19/71, DE-3302, dated 9/7/71, DE-3303, dated 10/21/71, DE-3304, dated 11/19/71, and DE-3305, dated 11/19/71.
FAA holder: Heliplane Aircraft Corporation International
Modification of rotor hub drag link in accordance with Devore Aviation Corporation Stress Memo dated December 21, 1978.
FAA holder: Heliplane Aircraft Corporation International
Installation of an OuterLink Corporation CP-3 or CP-3i Automatic Flight Following System and Optional Electronic Flight Bag Provisions in accordance with Outerlink Corporation Master Installation List, Document No. NL462073006, Revision J, dated April 14, 2010, or later FAA-approved revision.
FAA holder: North Flight Data Systems LLC
Manufacture of replacement Transmission Cowling Doors in accordance with Aeronautical Accessories, Inc. Report No. AA-97079, no revision, dated June 5, 1997 or later FAA approved revisions and installation per Report No. AA-96063, Revision A, dated May 6, 1997, or later FAA approved revisions.
FAA holder: Bell Helicopter Textron Inc.
Manufacture of Rappelling Fixture (structural provisions only) in accordance with Aeronautical Accessories, Inc. Report No. AA-97082, no revision, dated May 9, 1997 or later FAA approved revisions and installation per Report No. AA-87045, Revision L, dated May 9, 1997, or later FAA approved revisions.
FAA holder: Bell Helicopter Textron Inc.
Manufacture of Range Extender in accordance with Aeronautical Accessories, Inc. Report No. AA-96211, no revision, dated December 20, 1996 or later FAA approved revisions and installation per Report No. AA-95021, Revision F, dated December 19, 1996, or later FAA approved revisions.
FAA holder: Bell Helicopter Textron Inc.
Manufacture of Raingutters in accordance with Aeronautical Accessories, Inc. Report No. AA-97081, no revision dated May 8, 1997 or later FAA approved revisions and installation per Report No. AA-86020, Revision B, dated May 7, 1997, or later FAA approved revisions.
FAA holder: Bell Helicopter Textron Inc.
Manufacture of Baggage Compartment Extension, Spacemaker in accordance with Aeronautical Accessories, Inc. Report No. AA-97080, no revision, dated July 28, 1997 or later FAA approved revisions and installation per Report No. AA-97064, no revision, dated April 9, 1997, or later FAA approved revisions.
FAA holder: Bell Helicopter Textron Inc.
Manufacture of Collective Safety Cover in accordance with Aeronautical Accessories, Inc. Report No. AA-97054, no revision, dated April 1, 1997 or later FAA approved revisions and installation per Report No. AA-96065, Revision A, dated April 1, 1997, or later FAA approved revisions.
FAA holder: Bell Helicopter Textron Inc.
Manufacture of Cyclic Support Safety Cover in accordance with Aeronautical Accessories, Inc. Report No. AA-97053, no revision, dated March 28, 1997 or later FAA approved revisions and installation per Report No. AA-96067, no revision, dated April 25, 1996, or later FAA approved revisions.
FAA holder: Bell Helicopter Textron Inc.
Manufacture of Hat Rack Safety Net in accordance with Aeronautical Accessories, Inc. Drawing List Report No. AA-98021, no revision, dated February 5, 1998, and installation per Report No. AA-98020, no revision, dated February 5, 1998, or later FAA approved revisions.
FAA holder: Bell Helicopter Textron Inc.
Manufacture of Air Deflectors in accordance with Aeronautical Accessories, Inc. Report No. AA-98034, no revision, dated February 27, 1998 or later FAA approved revisions and installation per Report No. AA-98022, no revision, dated February 27, 1998, or later FAA approved revisions.
FAA holder: Bell Helicopter Textron Inc.
Manufacture of Crew Shoulder Harness Restraint System in accordance with Aeronautical Accessories, Inc. Report No. AA-97069, no revision, dated May 16, 1997 or later FAA approved revisions and installation per Report No. AA-96024, Revision A, dated November 5, 1996, or later FAA approved revisions.
FAA holder: Bell Helicopter Textron Inc.
Manufacture of Passenger Shoulder Harness Restraint System in accordance with Aeronautical Accessories, Inc. Report No. AA-97085, no revision, dated May 16, 1997 or later FAA approved revisions and installation per Report No. AA-97083, no revision, dated May 15, 1997, or later FAA approved revisions.
FAA holder: Bell Helicopter Textron Inc.
Manufacture of Quick Mount Kit for Nightsun Model SX-16 Searchlight in accordance with Aeronautical Accessories, Inc. Report No. AA-97106, no revision, dated July 18, 1997 or later FAA approved revisions and installation per Report No. AA-97102, no revision, dated June 20, 1997, or later FAA approved revisions.
FAA holder: Bell Helicopter Textron Inc.
Manufacture of Quick Mount Kit for Starbust Model SX-5 Searchlight in accordance with Aeronautical Accessories, Inc. Report No. AA-98029, no revision, dated February 26, 1998 or later FAA approved revisions and installation per Report No. AA-98023, Revision A, dated February 18, 1998, or later FAA approved revisions.
FAA holder: Bell Helicopter Textron Inc.
Installation of Nose Boom Provisions, Pylons and Antennas.
FAA holder: Sierra Nevada Corporation
Installation of Civil Air Patrol (CAP) Special Missions Equipment.
FAA holder: 3S Certification LLC
Installation of Airfilm AFDP-1 Down Post Utility Bracket.
FAA holder: Airfilm Camera Systems
Installation of Wedge Windows with Sliders into L/H and R/H passenger doors.
FAA holder: Bell Helicopter Textron Inc.
Installation of a cart stowage unit.
FAA holder: AIM Aviation Inc
Installation of a Mark X gaming partition.
FAA holder: AIM Aviation Inc
Installation of sidewall stowage units.
FAA holder: AIM Aviation Inc
Installation of overhead storage bins.
FAA holder: AIM Aviation Inc
Installation of overhead storage bins.
FAA holder: AIM Aviation Inc
Installation of coat closet and video bar.
FAA holder: AIM Aviation Inc
Installation of upper deck sidewall stowage units.
FAA holder: AIM Aviation Inc
Installation of a Side Stair Stow Unit.
FAA holder: AIM Aviation Inc
Installation of Stow-All II Overhead Bins.
FAA holder: AIM Aviation Inc
Installation of Stow-All III Overhead Bins.
FAA holder: Aim Aerospace Inc
Installation of Galleys #1, #2, #3 and #4.
FAA holder: Aim Aerospace Inc
Installation of a Cart Stowage Unit.
FAA holder: Aim Aerospace Inc
Installation of Centerline Stow Bins.
FAA holder: Aim Aerospace Inc
Installation of a Cart Stowage Unit.
FAA holder: AIM Aviation Inc
Installation of a Windscreen Assembly.
FAA holder: AIM Aviation Inc
Installation of a carry-on baggage unit.
FAA holder: AIM Aviation Inc
Installation of a Class Divider/ Curtain, Hatrack Configuration.
FAA holder: AIM Aviation Inc
Installation of a class divider and curtain track.
FAA holder: AIM Aviation Inc
Installation of carry-on baggage units.
FAA holder: AIM Aviation Inc
Installation of Centerline Stow Bins.
FAA holder: AIM Aviation Inc
Installation of a Forward Coat Closet.
FAA holder: Aim Aerospace Inc
Installation of class divider partition.
FAA holder: AIM Aviation Inc
Installation of a combination class divider and coat closet.
FAA holder: AIM Aviation Inc
Installation of a forward coat closet.
FAA holder: AIM Aviation Inc
Installation of a sidewall stowage unit.
FAA holder: AIM Aviation Inc
Installation of a sidewall stowage unit.
FAA holder: AIM Aviation Inc
Installation of a sidewall stowage unit.
FAA holder: AIM Aviation Inc
Installation of a trolley stowage unit.
FAA holder: AIM Aviation Inc
Installation of an attendant's console.
FAA holder: AIM Aviation Inc