Aircraft STC directory
American Champion Aircraft Corp 7KCAB STCs
The Jun 30, 2026 FAA DRS snapshot contains 84 selected supplemental type certificates with status Current whose public applicability data names the American Champion Aircraft Corp 7KCAB. Use it to identify modification scope and recorded holders—not to determine serial-number effectivity, compatibility, installation approval, or commercial availability.
Modification demand surface
Recorded holders
Recently revised 7KCAB STCs
Showing the 84 most recently revised records. Each entry links to the FAA source and separates public approval data from private commercial claims.
If Champion Part Number 7-480 door is installed, remove two of AN 380-2-2 cotter pins and two of AN 393-3 flat head pins as necessarry to remove one door. If American Champion Part Number 7-1265 door is installed, remove quick release pins to remove one door. Weight change --10lb at +21.06 arm.
FAA holder: National Aeronca Association
Application of fabric and polyurethane finishing system.
FAA holder: Shady Aviation LLC
Installation of an engine modified per STC SE04349CH.
FAA holder: SureFly Partners Ltd.
SkyView HDX Instrumentation and Autopilot System manufactured.
FAA holder: Dynon Avionics
To allow the use of UL91 or UL94 (minimum) grade aviation fuel.
FAA holder: Swift Fuels LLC
Installation of Garmin G3X Touch Electronic Flight Instrument System.
FAA holder: Garmin International Inc.
Installation of Plane-Power ALT-FLX alternator.
FAA holder: Hartzell Engine Technologies, LLC
Installation of the Electroair Electronic Ignition System.
FAA holder: Electroair Acquisition Corporation
Installation of Garmin G5 Electronic Flight Instrument.
FAA holder: Garmin International Inc.
Fabrication and installation of a Tail Wheel Anti-Shimmy Dampener.
FAA holder: Keller Engineering Group LLC
Fabrication and installation of a Tail Wheel Anti-Shimmy Dampener.
FAA holder: Keller Engineering Group LLC
Remove original cloth covering and install Ceconite covering.
FAA holder: Ceconite Division of Poly-Fiber Inc.
Tow bar, release mechanism, and safety tow link.
FAA holder: Fliegen Works Inc. \n d/b/a Pacific Aerial Tow Hooks
To allow the use of UL91 (minimum) grade aviation fuel.
FAA holder: Petersen Aviation Inc
Attachment of fabric covering and wing leading edge.
FAA holder: C William Pancake Jr
Installation of Garmin GPS 175 Navigation System and GNX 375 Navigation System with ADS-B In/Out Transponder.
FAA holder: Garmin International Inc
Installation of EDO Model 88A-1650 floats.
FAA holder: Kenmore Air EDO Floats LLC
Fabrication and installation of new or replacement of existing instrument panel lights dimmer control.
FAA holder: Seaton Engineering Corp.
Installation of the uAvionix skyBeacon Automatic Dependent Surveillance-Broadcast (ADS-B) Out.
FAA holder: uAvionix Corporation
Installation of Garmin G600 Primary Flight Display (PFD) and Multifunction Display (MFD) System.
FAA holder: Garmin International Inc.
Installation and Manufacturing of Aluminum Wing Spars.
FAA holder: MILMAN Engineering Inc
Installation of replacement metal leading edge.
FAA holder: MILMAN Engineering Inc
Installation of Rainbow Flying Service fuselage formers.
FAA holder: Rainbow Flying Service
Installation of Challenger Reusable Air Filter.
FAA holder: Challenger Aviation Products Inc.
Installation of Electronics International Inc. Glass Panel Engine Monitor (with In Flight Data) CGR-30P.
FAA holder: Electronics International Inc.
Installation of Garmin GTS 825 (TAS) or GTS 855 (TCAS I) Traffic System.
FAA holder: Garmin International Inc
Installation of a hydraulically actuated ski drag assembly.
FAA holder: Northern Airframes LLC
Installation of an alternate method of fastening aluminum wing ribs to wood spars.
FAA holder: Rainbow Flying Service LLC
Installation of EGT 701 series fuel flow instrument.
FAA holder: J P Instruments
Installation of J.P. Instruments (JPI) fuel flow indicating system.
FAA holder: J P Instruments
Installation of Aerospace Logic Aircraft Instruments.
FAA holder: Aerospace Logic Inc.
Installation of a Time Trac Data Recorder.
FAA holder: P2 Incorporated
Installation of Aviation Development oil filter.
FAA holder: Aviation Development Corporation
Installation of Electronics International Inc. Glass Panel Engine Monitor (with In-Flight Data) MVP-50P.
FAA holder: Electronics International Inc.
Installation of a remote spin-on oil filter adapter. (GC-1B w/Lycoming or Cont 360 engine installed).
FAA holder: Aviation Development Corporation
Install Ceconite 101 fabric.
FAA holder: Aviation Products Systems Inc.
Installation of Aero Enhancements UV250-1 Supplemental Instrument Panel Lightning System.
FAA holder: Aero Enhancements Inc.
Install Model M1500, M1800, or M2000 main skis. (7GCBC w/landing gear).
FAA holder: Aero Ski Manufacturing Co Inc
Installation of a PXE7300SR, In-Flight Entertainment System.
FAA holder: PS Engineering Incorporated
Install Aero Model M1500, M1800 or M2000 main skis. (7GCAA w/oleo).
FAA holder: Aero Ski Manufacturing Co Inc
Installation of fiberglass covering. (M-62 SERIES PT-19) (G-73 SCHWEIZER).
FAA holder: Razorback Fabrics Inc
Installation of Aero Advantage ADV200 series vacuum pump per Aero Advantage Drawing Number ADVMSI 500 latest FAA approved revision.
FAA holder: Aero Holdings Ltd. a Texas limited partnership
Surrendered and incorporated into STC SA241CH.
FAA holder: Cooper Aviation Supply Company, Inc.
Installation of M-20 Oil Separator, model 600-WP.
FAA holder: M-20 Oil Separators LLC
Installation of Starter Indicator light system.
FAA holder: Texas Skyways Inc
Installation of Inspection Covers over the wing front spar.
FAA holder: Ronald S. Piercy dba Rainbow Flying Service
Installation of Truboplus/ Electronics Int'l gauges and switches.
FAA holder: Aero Manufacturing Inc.
Replace existing engine induction air filter with AC Spark Plug filter.
FAA holder: Brackett Aero Filters Inc.
Installation of air filters.
FAA holder: Brackett Aero Filters Inc.