Aircraft STC directory
Cessna Aircraft 182 STCs
The Jun 30, 2026 FAA DRS snapshot contains 178 selected supplemental type certificates with status Current whose public applicability data names the Cessna Aircraft 182. Use it to identify modification scope and recorded holders—not to determine serial-number effectivity, compatibility, installation approval, or commercial availability.
Modification demand surface
Recorded holders
Recently revised 182 STCs
Showing the 100 most recently revised records. Each entry links to the FAA source and separates public approval data from private commercial claims.
Installation of alternate avionics support assembly.
FAA holder: Radiorax Aviation Systems LLC
Installation of portable hand control.
FAA holder: Union Aviation LLC
Installation of a modified exhaust collector assembly.
FAA holder: Aerospace Welding Minneapolis Inc.
Installation of C-3000 main ski and AWN-1200 nose wheel ski.
FAA holder: F.Atlee Dodge Aircraft Services
Installation of Wipaire Skis Inc. Model 3000 (Aircraft Skis) (FluiDyne) (Fli-Lite) Main and Model 2000 Nose skis.
FAA holder: F.Atlee Dodge Aircraft Services
Installation of an extended baggage compartment.
FAA holder: Athena Aircraft, LLC
Installation of replacement flap trailing edge bulbs with AOG Drawing.
FAA holder: Athena Aircraft, LLC
Replace existing horizontal stabilizer skins.
FAA holder: Athena Aircraft, LLC
Installation of Cleveland wheel No. 40-97A and brake No. 30-63A.
FAA holder: Kaman Corporation Aircraft Wheel & Brake LLC
Installation of FlightLogic Synthetic Vision Electronic Flight Information System (EFIS-SV).
FAA holder: Genesys Aerosystems Inc.
Installation of Flight Boss LTD S-RPE-CO Rudder Pedal Extensions.
FAA holder: Flight Boss Ltd.
Installation of Continental/NorthPoint XP470 engine and a McCauley D2A34C58/90AT-8, or 2A34C66/90AT-8, or , or D2A37C230/90REB-8 propeller in accordance with NorthPoint Aviation Number NPA-10182, Revision A, dated June 15, 2020 or later FAA approved revision.
FAA holder: NORTHPOINT AVIATION
Installation of Airwolf Filter Corp. Air Oil Separator.
FAA holder: Airwolf Filter Corporation
Installation of Airwolf Filter Corp. Air Oil Separator.
FAA holder: Airwolf Filter Corporation
Installation of an air/oil separator.
FAA holder: Airwolf Filter Corporation
Installation of an 18 gallon auxiliary fuel system in the aft baggage compartment.
FAA holder: Griggs Aircraft Refinishing LLC
Installation of a Three Point Torso Restraint System.
FAA holder: Alpha Aviation Inc
Installation of Brittain Pneumatic Pitch Assist.
FAA holder: Brittain Industries, Inc
Installed Brittain Industries, Inc., B2D Flight Control System.
FAA holder: Brittain Industries, Inc
Installation of Brittain Industries Model B2C Flight Control System.
FAA holder: Brittain Industries, Inc
Installation of Brittain Pitch Stabilization and Altitude Hold System.
FAA holder: Brittain Industries, Inc
Incorporation of bushing on carburetor hot air box control arm.
FAA holder: Dynamic Propeller
Fabrication and Installation of interior fiberglass trim panels.
FAA holder: Selkirk Aviation
Installation of Dynamic Propellers carburetor heat air box top skin.
FAA holder: Dynamic Propeller
Installation of Dynamic Propellers support brackets.
FAA holder: Dynamic Propeller
Installation of Stene Aviation, Inc. Wing Tips with LED lights.
FAA holder: Stene Aviation Inc
Installation of Skymotive jump door model 62-500.
FAA holder: Sheridan Sky Sports
Installation of Brittain Industries Pitch Assist Model PC-1 with Altitude Hold.
FAA holder: Brittain Industries, Inc
Installation of Brittain Pneumatic Pitch Assist Model PC-1.
FAA holder: Brittain Industries, Inc
Autopilot and optional nav-coupler 'add-on' BI-300, BI-301, or BI-304.
FAA holder: Brittain Industries, Inc
Installation of Brittain Industries Model CSA-1 Stability Augmentation System.
FAA holder: Brittain Industries, Inc
Installation of Brittain Industries Model B2C Flight Control System.
FAA holder: Brittain Industries, Inc
Installation of Brittain Industries Model B-5 Flight Control System.
FAA holder: Brittain Industries, Inc
Installation of GX50/60 GPS Navigator, Capstone configured MX20 Multi-Function Display and UAT transceiver.
FAA holder: Garmin International Inc
Install SAF-T-STOP auxiliary seat stop device.
FAA holder: Glen A Florence, Aero Technologies, Inc.
Installation of Becker Avionics SAR DF-517 Search and Rescue Direction Finding System.
FAA holder: Rhotheta USA Inc.
Installation of aileron and flap gap seals.
FAA holder: Gator Aerial Enterprises
Installation of the Skyote Gap Flap System. (180 SERIES).
FAA holder: Otto E. Bartoe Jr.
Install Hoskins Twilighter Mk.III supplementary lighting system.
FAA holder: BF Goodrich Aerospace
Installation of Doyn fiberglass wheel fairings.
FAA holder: D'Shannon Products Ltd.
Installation of Beryl D Shannon Aviation Specialties Engine Crankcase, Breather, and Vacuum Pump Air-Oil Separator in accordance with the FAA approved drawing lists shown on the attached Master Eligibility List Number MEL-2014 dated November 1, 1976, or later FAA approved drawing lists.
FAA holder: D'Shannon Products Ltd.
Installation of fiberglass nosebowl.
FAA holder: Selkirk Aviation
Installation of fiberglass extended baggage compartment.
FAA holder: Selkirk Aviation
Fabrication and Installation of composite engine cowling.
FAA holder: Selkirk Aviation
Installation of a McCauley C234C204/90DCB-8 propeller to a Teledyne Continental Motors Model O-470-U modified.
FAA holder: John Jewell Aircraft Inc
Installation of a McCauley C234C204/90DCB-8 propeller to a Teledyne Continental Motors Model O-470-U modified.
FAA holder: John Jewell Aircraft Inc
Installation of a firewall mounted battery tray and heat shield.
FAA holder: Burl's Aircraft LLC
Installation of two tinted, flush cockpit skylights.
FAA holder: Yingling Aircraft Inc
Fabrication and installation of F. Atlee dodge Aircraft Services, Cessna Tie-Down clamp.
FAA holder: F. Atlee Dodge Aircraft Services, LLC
Install Aero Fabricators shoulder harness and seat belt assembly.
FAA holder: Aero Fabricators Co
Installation of North American Surveillance Systems Strut Mount and Optional Cloud Cap Technologies TASE / TASE Dou Gimbals.
FAA holder: North American Surveillance Systems LLC
Installation of Glareshield per FAA Approved Ashby Glareshield Master Drawing List.
FAA holder: Aircraft Spruce and Specialty Co.
Installation of Horizontal Stabilizer Screw-on Leading Edge.
FAA holder: Tanalian Aviation Inc.
Installation of Knots 2U, Ltd Wheel and Body Fairings.
FAA holder: Knots 2U Ltd.
Installation of the Aero Vent Cabin Ventilation System.
FAA holder: Knots 2U Ltd.
Installation of external aerodynamic Vortelator Kit on airplanes.
FAA holder: Aircraft Development Co
Installation of Cleveland Main Wheels and Brakes.
FAA holder: F Atlee Dodge Aircraft Service
Installation of a BAS, Inc., or a Blancher Model 101 stowable seat.
FAA holder: Lake Vue Aeronautics
Installation of Saf-Air Products fuel quick drain backing plate C187 and fuel drain valve B187.
FAA holder: Saf-Air Products Inc.
Installation of MT-Propeller Model MTV-9-D/203-52 hydraulic 3-blade constant speed propeller.
FAA holder: MT- Propeller Entwicklung GmbH
Installation of the Courtesy Light Kit.
FAA holder: Knots 2U Ltd.
Installation of Grimes multi-plexed anti-collision light system.
FAA holder: Honeywell International Inc.
Installation of Jetton Alert II alarm system.
FAA holder: Jetton Aircraft
Installation of MT-Propeller Model MTV-9-D/195-18b hydraulic 3-blade constant speed propeller.
FAA holder: MT- Propeller Entwicklung GmbH