Aircraft STC directory
Cessna Aircraft 182N STCs
The Jun 30, 2026 FAA DRS snapshot contains 138 selected supplemental type certificates with status Current whose public applicability data names the Cessna Aircraft 182N. Use it to identify modification scope and recorded holders—not to determine serial-number effectivity, compatibility, installation approval, or commercial availability.
Modification demand surface
Recorded holders
Recently revised 182N STCs
Showing the 100 most recently revised records. Each entry links to the FAA source and separates public approval data from private commercial claims.
Installation of Teledyne Continental Motors Model IO-520-D engine and either a McCauley Model D3A34C401/90DFA-10 or Hartzell Model PHC-C3YF-1RF/F8468A( )-6R or PHC-C3YF-1RF/F7691( ) or PHC-G3YF-1RF/F8468A( )-6Ror PHC-G3YF-1RF/F7691( ) 3-blade propeller.
FAA holder: Air Plains Services Corporation
Installation of a Teledyne Continental Motors Model IO-550-D engine and either a Hartzell Model PHC-C3YF-1RF/F8468A( )-6R or PHC-C3YF-1RF/F7691( ) or PHC-G3YF-1RF/F8468A( )-6R or PHC-G3YF-1RF/F7691( )or McCauley Mod D3A34C401/90DFA-10 3-blade propeller.
FAA holder: Air Plains Services Corporation
Installation of alternate avionics support assembly.
FAA holder: Radiorax Aviation Systems LLC
Installation of portable hand control.
FAA holder: Union Aviation LLC
Installation of replacement flap trailing edge bulbs with AOG Drawing.
FAA holder: Athena Aircraft, LLC
Replace existing horizontal stabilizer skins.
FAA holder: Athena Aircraft, LLC
Installation of FlightLogic Synthetic Vision Electronic Flight Information System (EFIS-SV).
FAA holder: Genesys Aerosystems Inc.
Install BRS-182 parachute recovery system.
FAA holder: Ballistic Recovery Systems Inc.
Installation of Airwolf Filter Corp. Air Oil Separator.
FAA holder: Airwolf Filter Corporation
Installation of Airwolf Filter Corp. Air Oil Separator.
FAA holder: Airwolf Filter Corporation
Installation of an air/oil separator.
FAA holder: Airwolf Filter Corporation
Installation of a cooling shroud on engine driven dry air pumps.
FAA holder: McFarlane Aviation Inc
Installation of a Three Point Torso Restraint System.
FAA holder: Alpha Aviation Inc
Installation of Brittain Pneumatic Pitch Assist.
FAA holder: Brittain Industries, Inc
Installation of Dynamic Propellers carburetor heat air box top skin.
FAA holder: Dynamic Propeller
Installation of Dynamic Propellers support brackets.
FAA holder: Dynamic Propeller
Fabrication and installation of Dynamic Propeller Cowl Flap Support Kit.
FAA holder: Dynamic Propeller
Installation of Brittain Industries Pitch Assist Model PC-1 with Altitude Hold.
FAA holder: Brittain Industries, Inc
Installation of Brittain Pneumatic Pitch Assist Model PC-1.
FAA holder: Brittain Industries, Inc
Autopilot and optional nav-coupler 'add-on' BI-300, BI-301, or BI-304.
FAA holder: Brittain Industries, Inc
Installation of Brittain Industries Model CSA-1 Stability Augmentation System.
FAA holder: Brittain Industries, Inc
Installation of Brittain Industries Model B2C Flight Control System.
FAA holder: Brittain Industries, Inc
Installation of Brittain Industries Model B-5 Flight Control System.
FAA holder: Brittain Industries, Inc
Installation of a Century Automatic Flight System, Model AK1018 consisting of a Century 2010/2030/2031/2050/2051/30300/30301/30310/30320/30321/30330/30331/30500/30501/30510/30511/30520/30521/30530/30531/40300/40301/40310/40311/40320/40321/40330/40331 Autopilot.
FAA holder: Century Flight Systems Inc
Installation of Century Automatic Flight System, Model AK989.
FAA holder: Century Flight Systems Inc
Install SAF-T-STOP auxiliary seat stop device.
FAA holder: Glen A Florence, Aero Technologies, Inc.
Installation of Becker Avionics SAR DF-517 Search and Rescue Direction Finding System.
FAA holder: Rhotheta USA Inc.
Installation of Doyn fiberglass wheel fairings.
FAA holder: D'Shannon Products Ltd.
Installation of Beryl D Shannon Aviation Specialties Engine Crankcase, Breather, and Vacuum Pump Air-Oil Separator in accordance with the FAA approved drawing lists shown on the attached Master Eligibility List Number MEL-2014 dated November 1, 1976, or later FAA approved drawing lists.
FAA holder: D'Shannon Products Ltd.
Installation of fiberglass nosebowl.
FAA holder: Selkirk Aviation
Installation of a McCauley C234C204/90DCB-8 propeller to a Teledyne Continental Motors Model O-470-U modified.
FAA holder: John Jewell Aircraft Inc
Installation of a McCauley C234C204/90DCB-8 propeller to a Teledyne Continental Motors Model O-470-U modified.
FAA holder: John Jewell Aircraft Inc
Installation of a firewall mounted battery tray and heat shield.
FAA holder: Burl's Aircraft LLC
Installation of a pair of fixed, extended flap with tab, cowl cooling flaps in lieu of the movable cowl flaps.
FAA holder: Horsham Aviation Services
Installation of two tinted, flush cockpit skylights.
FAA holder: Yingling Aircraft Inc
Fabrication and installation of F. Atlee dodge Aircraft Services, Cessna Tie-Down clamp.
FAA holder: F. Atlee Dodge Aircraft Services, LLC
Install Aero Fabricators shoulder harness and seat belt assembly.
FAA holder: Aero Fabricators Co
Installation of North American Surveillance Systems Strut Mount and Optional Cloud Cap Technologies TASE / TASE Dou Gimbals.
FAA holder: North American Surveillance Systems LLC
Installation of Knots 2U, Ltd Wheel and Body Fairings.
FAA holder: Knots 2U Ltd.
Installation of external aerodynamic Vortelator Kit on airplanes.
FAA holder: Aircraft Development Co
Installation of Cleveland Main Wheels and Brakes.
FAA holder: F Atlee Dodge Aircraft Service
Installation of a BAS, Inc., or a Blancher Model 101 stowable seat.
FAA holder: Lake Vue Aeronautics
Installation of Saf-Air Products fuel quick drain backing plate C187 and fuel drain valve B187.
FAA holder: Saf-Air Products Inc.
Installation of MT-Propeller Model MTV-9-D/203-52 hydraulic 3-blade constant speed propeller.
FAA holder: MT- Propeller Entwicklung GmbH
Installation of the Courtesy Light Kit.
FAA holder: Knots 2U Ltd.
Installation of Grimes multi-plexed anti-collision light system.
FAA holder: Honeywell International Inc.
Installation of Grimes strobe anti-collision lights.
FAA holder: Honeywell International Inc.
Installation of Jetton Alert II alarm system.
FAA holder: Jetton Aircraft
Installation of MT-Propeller Model MTV-9-D/195-18b hydraulic 3-blade constant speed propeller.
FAA holder: MT- Propeller Entwicklung GmbH
Installation of NPX138N-XXX FM Transceiver.
FAA holder: Northern Airborne Technology Ltd
Installation of McCauley C2A34C204/90DCB-8, 2A34C203/90DCA-8 or 2A34C201/90DA-8 propeller (through S/N 18265175).
FAA holder: Northwest Propeller Services Inc.
Installation of VENTUBE pilot/co-pilot overhead fresh air valves. (195 SERIES LC-126A; LC-126B; LC-126C).
FAA holder: Soros Inc. a Texas Corporation
Installation of the Knots 2U Flight Lite System.
FAA holder: Knots 2U Ltd.
Installation of the Whipline Model 3000 floats.
FAA holder: Seaplanes West Inc.
Installation of McvCauley Propeller Model D3A36C435/80VEA-0, and spinner assembly.
FAA holder: McCauley Propeller Systems
Installation of Continental O-470-S or O-470-R engine.
FAA holder: P Ponk Aviation
Installation of flap gap seal per Aircraft Development Co. Drawing List 114-1 stamped FAA approved with a date of April 27, 2005 or later. Conformity data for Drawing List 114-1 is derived from Drawing List 114-1 Revision C and STC s SA1484CE, SA1490CE, SA1491CE, SA1492CE, SA1493CE, SA1494CE, and SA1495CE.
FAA holder: Aircraft Development Co
Installation of aileron gap seal per Aircraft Development Co. Drawing List 115-1 stamped FAA approved with a date of April 27, 2005 or later. Conformity data for Drawing List 115-1 is derived from Drawing List 115-1 Revision D and STC s SA1484CE, SA1490CE, SA1491CE, SA1492CE, SA1493CE, SA1494CE, and SA1495CE.
FAA holder: Aircraft Development Co
Replace Cessna fuel cell drain valve assembly P/N 84C with Safe Air Repair P/N SAR-2.
FAA holder: Aero Fabricators Co
Modification of right hand side door to provide an openable window.
FAA holder: Ellis & Associates CADD/Technical Illustrations
Installation of flap and aileron gap seals.
FAA holder: Aircraft Development Co