Installation of alternate avionics support assembly.
FAA holder: Radiorax Aviation Systems LLC
Aircraft STC directory
Cessna Aircraft R182 STCs
The Jun 30, 2026 FAA DRS snapshot contains 80 selected supplemental type certificates with status Current whose public applicability data names the Cessna Aircraft R182. Use it to identify modification scope and recorded holders—not to determine serial-number effectivity, compatibility, installation approval, or commercial availability.
80
listed Current at snapshot
41
holder directories
10
modification categories
Dec 13, 2024
latest recorded revision
Modification demand surface
Recorded holders
Brittain Industries, Inc7Knots 2U Ltd.5Aircraft Development Co4Hartwig Aircraft Fuel Cell Repair4Technisonic Industries Limited3Curry Aviation LLC2Flight Boss Ltd.2McFarlane Aviation Inc2John Jewell Aircraft Inc2Aero Fabricators Co2Aerographics Inc.2S-TEC Corporation2Athena Aircraft, LLC1Airwolf Filter Corporation1CAV Ice Protection Inc1Century Flight Systems Inc1G & D Aero Products Inc.1Aerotech Components Inc1Avidyne Corporation1Flint Aero Inc1
Recently revised R182 STCs
Showing the 80 most recently revised records. Each entry links to the FAA source and separates public approval data from private commercial claims.
View record
Installation of replacement flap trailing edge bulbs with AOG Drawing.
FAA holder: Athena Aircraft, LLC
Installation of Flight Boss LTD S-RPE-CN Rudder Pedal Extensions.
FAA holder: Flight Boss Ltd.
Installation of an air/oil separator.
FAA holder: Airwolf Filter Corporation
Installation of a cooling shroud on engine driven dry air pumps.
FAA holder: McFarlane Aviation Inc
Installation of Brittain CSA-1 Stability Augmentation System.
FAA holder: Brittain Industries, Inc
Installation of Brittain Industries Pitch Assist Model PC-1 with Altitude Hold.
FAA holder: Brittain Industries, Inc
Installation of Brittain Pneumatic Pitch Assist Model PC-1.
FAA holder: Brittain Industries, Inc
Autopilot and optional nav-coupler 'add-on' BI-300, BI-301, or BI-304.
FAA holder: Brittain Industries, Inc
Installation of Brittain Industries Model CSA-1 Stability Augmentation System.
FAA holder: Brittain Industries, Inc
Installation of Brittain Industries Model B2C Flight Control System.
FAA holder: Brittain Industries, Inc
Installation of a Century Automatic Flight System Model AK957.
FAA holder: Century Flight Systems Inc
Installation of Inline Air Filter Kit, P/N CV1J4-C.
FAA holder: Aerotech Components Inc
Install SAF-T-STOP auxiliary seat stop device.
FAA holder: Glen A Florence, Aero Technologies, Inc.
Installation of R134 vapor cycle air conditioning system.
FAA holder: ROCKY TOP LEASING INC.
Installation of Hartzell HC-(C,I,F)3YR-1(A)RF/F8068(K) or HC-(C,I,F)3YR-1(A)RF/F7693F(K)+2 propeller.
FAA holder: Hartzell Propeller Inc
Installation of Doyn fiberglass wheel fairings.
FAA holder: D'Shannon Products Ltd.
Installation of a McCauley C234C204/90DCB-8 propeller to a Teledyne Continental Motors Model O-470-U modified.
FAA holder: John Jewell Aircraft Inc
Installation of a McCauley C234C204/90DCB-8 propeller to a Teledyne Continental Motors Model O-470-U modified.
FAA holder: John Jewell Aircraft Inc
Installation of two tinted, flush cockpit skylights.
FAA holder: Yingling Aircraft Inc
Fabrication and installation of F. Atlee dodge Aircraft Services, Cessna Tie-Down clamp.
FAA holder: F. Atlee Dodge Aircraft Services, LLC
Install Aero Fabricators shoulder harness and seat belt assembly.
FAA holder: Aero Fabricators Co
Installation of an external infrared imaging system.
FAA holder: Paravion Technology Inc
Installation of the Aero Vent Cabin Ventilation System.
FAA holder: Knots 2U Ltd.
Installation of Saf-Air Products fuel quick drain backing plate C187 and fuel drain valve B187.
FAA holder: Saf-Air Products Inc.
Replacement of hydraulic system pressure switch.
FAA holder: APPH Wichita Inc.
Installation of the Courtesy Light Kit.
FAA holder: Knots 2U Ltd.
Installation of NPX138N-XXX FM Transceiver.
FAA holder: Northern Airborne Technology Ltd
Installation of VENTUBE pilot/co-pilot overhead fresh air valves. (195 SERIES LC-126A; LC-126B; LC-126C).
FAA holder: Soros Inc. a Texas Corporation
Installation of the Knots 2U Flight Lite System.
FAA holder: Knots 2U Ltd.
Installation of McCauley Propeller Model B3D36C431/80VSA-1 or B3D36C433/80VSA-1, and spinner assembly.
FAA holder: McCauley Propeller Systems
Installation of flap gap seal per Aircraft Development Co. Drawing List 114-1 stamped FAA approved with a date of April 27, 2005 or later. Conformity data for Drawing List 114-1 is derived from Drawing List 114-1 Revision C and STC s SA1484CE, SA1490CE, SA1491CE, SA1492CE, SA1493CE, SA1494CE, and SA1495CE.
FAA holder: Aircraft Development Co
Installation of aileron gap seal per Aircraft Development Co. Drawing List 115-1 stamped FAA approved with a date of April 27, 2005 or later. Conformity data for Drawing List 115-1 is derived from Drawing List 115-1 Revision D and STC s SA1484CE, SA1490CE, SA1491CE, SA1492CE, SA1493CE, SA1494CE, and SA1495CE.
FAA holder: Aircraft Development Co
Replace Cessna fuel cell drain valve assembly P/N 84C with Safe Air Repair P/N SAR-2.
FAA holder: Aero Fabricators Co
Modification of right hand side door to provide an openable window.
FAA holder: Ellis & Associates CADD/Technical Illustrations
Installation of Wulfsberg P-2000 and/or C-2000-RT-2000 transceiver system.
FAA holder: Wulfsberg Electronics Division
Installation of flap and aileron gap seals.
FAA holder: Aircraft Development Co
Installation of fuel caps. (R182 S/N R18200002 THRU R18200583) (182Q THRU S/N 18266590).
FAA holder: Hartwig Aircraft Fuel Cell Repair
Installation of fuel inlets and caps. (TR182 S/N R18200584 THRU R18202032) (T182 S/N 18266591 THRU18268542).
FAA holder: Hartwig Aircraft Fuel Cell Repair
Installation of canvas hammock seat.
FAA holder: Stoots Aviation/David A. Stoots
Installation of Precise Flight Model 100(electric) Speedbrake System.
FAA holder: Precise Flight Inc
Installation of Lycoming IO-540-K1A5 or IO-540-K1G5 engine and Hartzell HC-C3YR-1RF/8468-6R or HC-C3YR-IRF/8468AB-6R propeller.
FAA holder: Air Plains Services Corporation
Installation of cockpit utility light.
FAA holder: Burns Richard G
Installation of McFarlane Aviation Flap Roller Assembly Service Kit MCSK100.
FAA holder: McFarlane Aviation, Inc.
Installation of Technisonic Industries Ltd OSAT-100 Airborne Position/Data Communicator.
FAA holder: Technisonic Industries Limited
Replacement of right front seat with stretcher.
FAA holder: Aviation Fabricators Inc
Installation of Airborne Position/Data Communicator.
FAA holder: Technisonic Industries Limited
Installation of model FB-02 'Fixed Arm' Pilot Arm Rest on R/H side of pilot seat and optional GPS Support Arm System.
FAA holder: Quality Aircraft Components LC
Installation of Model FB-01 "Swing Arm" Pilot Arm Rest System on R/H side of pilot seat.
FAA holder: Quality Aircraft Components LC
Installation of 76 vortex generators and 2 small delta wings on the upper surface of the wings.
FAA holder: Aeronautical Testing Service Inc.
Installation of vortex generators on wings and tail surfaces.
FAA holder: Micro AeroDynamics Inc
Installation of fiberglass replacement wing tips.
FAA holder: Aircraft Development Co
Installation of recognition lights on horizontal stabilizer.
FAA holder: DeVore Aviation Corporation of America, a New Mexico Corporation