SA02631SEPropellers
Installation of a Hartzell Propeller Inc. Model HC-C2YR-1N/NG8301-3 Propeller.
FAA holder: Cub Crafters Inc
FAA-listed STC holder
Cub Crafters Inc STCs
The Jun 30, 2026 FAA DRS snapshot lists 62 selected supplemental type certificates with status Current under Cub Crafters Inc. The records span 117 public aircraft directories and 9 modification categories. This is a research directory, not a claim that any specific kit or service is currently offered.
62
listed Current at snapshot
117
aircraft directories
9
modification categories
Nov 30, 2018
latest recorded revision
Modification mix
Other aircraft modifications16
Fuel systems15
Aircraft structures9
Engine and powerplant6
Propellers5
Landing gear and brakes4
Avionics4
Cabin and interiors2
Electrical systems1
Aircraft represented
Cessna Aircraft 182178 STCsCessna Aircraft 182A157 STCsCessna Aircraft 182E157 STCsCessna Aircraft 172154 STCsCessna Aircraft 182B154 STCsCessna Aircraft 182C152 STCsCessna Aircraft 182F152 STCsCessna Aircraft 182D150 STCsCessna Aircraft 182G150 STCsCessna Aircraft 182K149 STCsCessna Aircraft 182H148 STCsCessna Aircraft 182J148 STCsCessna Aircraft 172D146 STCsCessna Aircraft 172E146 STCsCessna Aircraft 182L146 STCsCessna Aircraft 172I145 STCsCessna Aircraft 172G142 STCsCessna Aircraft 172B140 STCsCessna Aircraft 172C140 STCsCessna Aircraft 172A138 STCs
Recently revised records
Showing the 62 most recently revised records. Category directories provide the complete paginated discovery path.
View record
SA02593SEPropellers
Installation of a Hartzell Propeller Inc. Model HC-C2YR-1N/NG8301-3 Propeller.
FAA holder: Cub Crafters, Inc
SA00388NYOther aircraft modifications
Install extended baggage compartment and baggage net in accordance with Cub Crafters, Inc., Master Drawing List, MDL105400, Revision D, dated November 2, 1999, or later Federal Aviation Administration (FAA) approved revision, and its listed data.
FAA holder: Cub Crafters Inc
SA00275SEOther aircraft modifications
Fabrication and installation of vortex generators mounted on the wings and a tail strake mounted on either side of the empennage.
FAA holder: Cub Crafters Inc
SA00281NYOther aircraft modifications
Installation of Goodyear Tundra 26 x 10.5 x 6 (6 ply), or 8:50 x 6 Tires and Tubes in accordance with Cub Crafters, Inc. Master Drawing List, MDL104200, Revision C, dated January 21, 2002, or later Federal Aviation Administration (FAA) approved revision.
FAA holder: Cub Crafters Inc
SA00411SELanding gear and brakes
Installation of Cub Crafters extended landing gear kit.
FAA holder: Cub Crafters Inc
SA00414SEOther aircraft modifications
Approval of this change in type design applies to the above model aircraft only. This approval should not be extended to other aircraft of these models on which other previously approved modifications are incorporated unless it is determined that the relationship between this change and any of those previously approved modifications will introduce no adverse effect upon the airworthiness of that aircraft. A copy of this certificate must be maintained as part of the permanent records for the modified aircraft.
FAA holder: Cub Crafters Inc
SA00494SEAircraft structures
Replace existing fuselage stringers with Cub Crafters, Inc. Model 105700 stringers in accordance with Cub Crafters, Inc. Master Drawing List, MDL 105700, Revision B, dated January 8, 1998, and its listed date or later Federal Aviation Administration approved revision.
FAA holder: Cub Crafters Inc
SA00495SEAircraft structures
Replace existing floor boards with Cub Crafters, Inc. Model 102600 floor boards in accordance with Cub Crafters, Inc. Master Drawing List, MDL 102600, Revision E, dated December 15, 1997, and its listed data or later Federal Aviation Administration approved revision.
FAA holder: Cub Crafters Inc
SA00522SEPropellers
: Installation of certain Lycoming O-320 series engines, McCauley or Sensenich propeller and associated hardware per Cub Crafters Master Drawing List, MDL103000, Revision B, dated April 17, 1998, or later Federal Aviation Administration (FAA) approved revision.
FAA holder: Cub Crafters Inc
SA00543SEEngine and powerplant
Replace existing engine cowling channels and stiffeners with Cub Crafters, Inc. Model 105350 channels in accordance with Cub Crafters, Inc., Master Drawing List, MDL 105350, Revision E, dated July 10, 1998, and its listed data, or later Federal Aviation Administration approved revisions.
FAA holder: Cub Crafters Inc
SA00561SEPropellers
Install Sensenich 80 inch diameter wood propeller model W80DM in accordance with Cub Crafters, Inc. Master Drawing List, MDL 103110, Revision new, dated May 26, 1998, and its listed data or later Federal Aviation Administration (FAA) approved revision.
FAA holder: Cub Crafters Inc
SA00562SEPropellers
Install McCauley 82 inch diameter metal propeller model 1A175/GM8241, GM8242, GM8243, or GM8244 in accordance with Cub Crafters, Inc. Master Drawing List, MDL 103120, Revision new, dated May 26, 1998, and its listed data or later Federal Aviation Administration (FAA) approved revision.
FAA holder: Cub Crafters Inc
SA00703SEAircraft structures
Install right side access door in accordance with Cub Crafters, Inc. Master Drawing List, MDL 105900, Revision B, dated May 25, 1999, and its listed data or later Federal Aviation Administration approved revision.
FAA holder: Cub Crafters Inc
SA00718SEOther aircraft modifications
Installation of oil cooler, hoses, and baffles in accordance with Cub Crafters, Inc., Master Drawing List, MDL 103300, Revision A, dated July 2, 1999, and its listed data, or later Federal Aviation Administration approved revision.
FAA holder: Cub Crafters Inc
SA00750SEEngine and powerplant
Install boot cowling and firewall assembly in accordance with Cub Crafters, Inc. Master Drawing List, MDL105300, Revision A, dated October 26, 1999, and its listed data.
FAA holder: Cub Crafters Inc
SA00753SEEngine and powerplant
Install engine baffles in accordance with Cub Crafters, Inc. Master Drawing List, MDL103800, Revision B dated August 30, 1999, and its listed data, or later Federal Aviation Administration approved revision.
FAA holder: Cub Crafters Inc
SA00856SEOther aircraft modifications
Install refueling steps in accordance with Cub Crafters, Inc. Master Drawing List, MDL103440, Revision -, dated November 30, 1999, or later Federal Aviation Administration (FAA) approved revision.
FAA holder: Cub Crafters Inc
SA00951SEOther aircraft modifications
Install headliner in accordance with Cub Crafters, Inc., Master Drawing List, MDL 105600, Rev. A, dated July 30, 2001, or later FAA approved revision.
FAA holder: Cub Crafters Inc
SA01126SEOther aircraft modifications
Install windows in accordance with Cub Crafters Master Drawing List CR102500-3, dated July 24, 2002, or later Federal Aviation Administration approved revisions. Since there are no special instructions for continued airworthiness required, Title 14 Code of Federal Regulation part 43 is considered adequate for the maintenance of the installation.
FAA holder: Cub Crafters Inc
SA01158SELanding gear and brakes
Install heavy duty tail wheel assembly in accordance with Cub Crafters, Inc. Master Document List Report CR123300-3, Revision D, dated July 15, 2003, or later Federal Aviation Administration approved revision. This modification does not require specific continued airworthiness instructions. Federal Aviation Regulation 43 is adequate to insure Continued Airworthiness of this modification.
FAA holder: Cub Crafters Inc
SA01242SEOther aircraft modifications
Fabrication of PA-18 Inspection Covers in accordance with Cub Crafters, Inc. Master Drawing List Report CR124500-3, dated July 14, 2003, or later Federal Aviation Administration (FAA) approved revision. The inspection covers must be installed in accordance with Cub Crafters, Inc. Installation Instructions Report CR124500-2, dated June 23, 2003, or later FAA-approved revision.
FAA holder: Cub Crafters Inc
SA01247SEOther aircraft modifications
Install heated pitot tube and new static system.
FAA holder: Cub Crafters Inc
SA01350SEAircraft structures
Install replacement wing assembly in accordance with Cub Crafters, Inc. Master Drawing List, 123400MDL, Revision C, dated December 8, 2003, and Installation Instructions Document CR123410II, Revision NC, dated September 23, 2003, or later Federal Aviation Administration approved revision.
FAA holder: Cub Crafters Inc
SA01377SEAvionics
Install B and C alternator model 400-2 (with thermocouples and regulator B0201-1), Electronics International (EI) MUX-8A data recorder, EI ASC-5A super clock, EI FM-VA Volt Amp functional module and supplemental instrument panel in a PA-18 150 Serial Number 9968CC.
FAA holder: Cub Crafters Inc
SA01378SEAircraft structures
Install replacement fuselage tube or tube reinforcement.
FAA holder: Cub Crafters Inc
SA1243CELanding gear and brakes
Installation of Cleveland wheels and brakes and optional wheel fenders per Flanagan Aircraft Co. Drawing List No.5 stamped "FAA Approved" with a date of July 7, 1976, for PA-18, Serial Number 18-8118; May 17, 1977, for all other PA-18 airplanes; and September 29, 1977, for installation of optional 24 x 10 x 6 Muskeg King tires.
FAA holder: Cub Crafters Inc
SA1244CELanding gear and brakes
Replacement landing gear components per Flanagan Aircraft Co. Drawing No. 1-9.01, stamped "FAA Approved," with a date of July 7, 1976, or later Federal Aviation Administration (FAA) approved revision.
FAA holder: Cub Crafters Inc
SA1245CEOther aircraft modifications
Replace existing Scott Master Cylinder with Cub Crafters, Inc. Model 120700 modified Scott Master Cylinder in accordance with Cub Crafters, Inc. Master Drawing List, MDL 120700, Rev. D, dated January 8, 1998, and its listed data or later Federal Aviation Administration approved revision.
FAA holder: Cub Crafters Inc
SA12ALFuel systems
Fabrication and installation of Stoddard Aero Service auxiliary fuel tanks per Stoddard Aero Service Drawing List No. 12, dated February 7, 1975, or later Federal Aviation Administration approved revision. Stoddard Aero Service Airplane Flight Manual Supplement, dated January 29, 1969, is required with this installation.
FAA holder: Cub Crafters Inc
SA1333CEEngine and powerplant
Installation of replacement engine mount fabricated per Flanagan Aircraft Co. Drawing List 1-14.00 stamped "FAA Approved" with a date of June 3, 1977, or later Federal Aviation Administration approved revision.
FAA holder: Cub Crafters Inc
SA1366CECabin and interiors
Installation of a third seat, removable cross member, and reinforced baggage compartment floor per Cub Crafters Master Document List 123600-1, Revision N/C, dated December 4, 2002, or later Federal Aviation Administration approved revision.
FAA holder: Cub Crafters Inc
SA1368CECabin and interiors
Cabin metalization; installation of new boot cowl, firewall, swing up side windows, larger baggage door, and inspection access in aft fuselage per Flanagan Aircraft Drawing List No. 1-10.00 (less Drawing 1-11.02) stamped "FAA Approved" on September 12, 1977, or later.
FAA holder: Cub Crafters Inc
SA1370CEFuel systems
Revised fuel gaging and dual fuel feed line installation from both tanks. Two wing fuel tanks standard.
FAA holder: Cub Crafters Inc
SA2724NMOther aircraft modifications
Installation of actuating mechanism for drooping ailerons in accordance with Top Assembly Drawing Breakdown List, Drawing Number 840006, dated January 24, 1986, or later Federal Aviation Administration (FAA) approved revision.
FAA holder: Cub Crafters Inc
SA4379NMOther aircraft modifications
Installation of 1-5 overhead skylights.
FAA holder: Cub Crafters Inc
SA446ALFuel systems
Fabrication and installation of Stoddard Aero Service Model 15 fuel tanks per Stoddard Aero Service Drawing List No. 447, dated February 7, 1975, or later Federal Aviation Administration approved revision. Stoddard Aero Service Airplane Flight Manual Supplement dated August 6, 1971, is required with this installation.
FAA holder: Cub Crafters Inc
SA447ALFuel systems
Fabrication and installation of Stoddard Aero Service Model 15 auxiliary fuel tank in the right wing per Stoddard Aero Service Drawing List No. 447, dated February 7, 1975, or later Federal Aviation Administration approved revision. Stoddard Aero Service Airplane Flight Manual Supplement dated August 6, 1971, is required with this installation.
FAA holder: Cub Crafters Inc
SA460SWAircraft structures
Install wing tips in accordance with Cub Crafters, Inc. Master Drawing List., MDL102400, Revision C, dated May 30, 2001, or later FAA approved revision.
FAA holder: Cub Crafters Inc
SA536ALFuel systems
Fabrication and installation of Stoddard Aero Service wing auxiliary fuel tanks per Stoddard Aero Service Drawing List No. 12, dated February 7, 1975, or later Federal Aviation Administration approved revision. Stoddard Aero Service Airplane Flight Manual Supplement, dated January 29, 1969, is required with this installation.
FAA holder: Cub Crafters Inc
SA69ALFuel systems
Fabrication and installation of Stoddard Aero Service Model 15 fuel tanks per Stoddard Aero Service Drawing List No. 447, dated February 7, 1975, or later Federal Aviation Administration approved revision. Stoddard Aero Service Airplane Flight Manual Supplement, dated June 10, 1963, is required for this installation.
FAA holder: Cub Crafters Inc
SA708SWAircraft structures
Installation of Plane Booster Safe Flight Wing Tips 101-28 in accordance with date in Upper Valley Aviation Report 101-28-180, dated October 4, 1966.
FAA holder: Cub Crafters Inc
SA887CEOther aircraft modifications
Removal of hopper cover and installation of Lexan skylight and side windows per Flanagan Aircraft Drawing List Number 3 with a Federal Aviation Administration (FAA) approval date of July 15, 1975 or later.
FAA holder: Cub Crafters Inc
SA900CEAircraft structures
Replace round wingtips with constant-chord, square tips and wing splates per Flanagan Aircraft Drawing List No. 1 dated February 1, 1975, or later Federal Aviation Administration approved revision.
FAA holder: Cub Crafters Inc
SA92NWEngine and powerplant
Installation of Lycoming O-360 series engine, McCauley, Sensenich Propeller Manufacturing Co., or Sensenich Wood Propeller Co, Inc. propeller and associated hardware per Cub Crafters, Inc. Master Drawing List 101000-MDL, Revision U, dated February 27, 2004, or later Federal Aviation Administration (FAA) approved revision.
FAA holder: Cub Crafters Inc
SA957SWOther aircraft modifications
Installation of Plane Booster Kit 101-C 1000 in accordance with Upper Valley Drawing 101-24250-6, dated January 10, 1965, and Installation Instructions, Revision 2, dated June 3, 1968.
FAA holder: Cub Crafters Inc
SA02134SEOther aircraft modifications
Control gap seals manufactured in accordance with the latest Federal Aviation Administration (FAA) approved revision of Cub Crafters Drawing RM0601, installed in accordance with the installation instructions listed in AML SA02134SE, and maintained in accordance with the maintenance manual supplement listed in AML SA02134SE.
FAA holder: Cub Crafters Inc