FAA STC category
Aircraft structures STCs
Fuselage, wing, floor, door, window, frame, and other structural changes. This directory contains 1,149 selected records listed with status Current in the June 30, 2026 FAA DRS snapshot and links every entry to its source.
Installation of wing leading edge cuffs and tips.
FAA holder: Curry Aviation LLC
Add wing strut fairings and contour wing struts.
FAA holder: Curry Aviation LLC
Install STOL kits (wing leading edge cuffs, drooped tips, and stall fences).
FAA holder: Curry Aviation LLC
Installation of Airfilm Wing Strut Utility Mount.
FAA holder: Airfilm Camera Systems
Installation of Right Wing Landing and Taxi Lights.
FAA holder: Summit Aviation Inc.
Installation of Right Wing HID Landing and Incandescent Taxi Lights.
FAA holder: Summit Aviation Inc
Structural Provisions for a Composite Ramp Floor Panel.
FAA holder: Aeromatrix Composites
Fabrication and installation of passenger door steps.
FAA holder: Airforms LLC.
Installation of Reinforcement of Wing Assemblies and WingExtension (TM) Wing Tip Extensions.
FAA holder: Air Research Technology Inc
Installation of VIH Aerospace (VIHA) Cockpit Door Bubble Window.
FAA holder: VIH Aerospace Inc
Installation of a Fuselage Mounted Radome and Antennta Ring Assembly in accordance GoAeroMX Master Data List 20114-MDL-00001 Rev (IR) dated 06/07/2022 or later FM Approved Revision.
FAA holder: StandardAero Business Aviation Services LLC
Installation of a sliding window in the rear sliding door.
FAA holder: Tech-Tool Plastics Inc
Installation and fabrication of steel wing lift strut attachment fittings.
FAA holder: Burl's Aircraft LLC
Installation of left hand pilot door.
FAA holder: Burl's Aircraft Rebuild LLC
Replacement of Fixed Wing Control Cables.
FAA holder: Thunder Bay Aviation Ltd
Installation of a reinforced flight deck door.
FAA holder: Commercial Aircraft Interiors
One-time installation of an R2 Door Closeout Panel on Boeing Model 737-7BC airplane, Serial Number 30329.
FAA holder: Commercial Aircraft Interiors
Installation of an overhead bin door lock.
FAA holder: Commercial Aircraft Interiors
Installation of a hatch door retention assembly and hatch door hinge assembly.
FAA holder: Commercial Aircraft Interiors
Installation of Self Illuminating Floor Path Marking System.
FAA holder: Lufthansa Technik AG
Installation of a forward pressure bulkhead Kinetic Energy Protection Device (KEPR).
FAA holder: Rockwell Collins Inc.
Installation of Riblets Film on Lower Fuselage.
FAA holder: Lufthansa Technik AG
Installation of a wing tip recognition lights.
FAA holder: Gallagher Aviation LLC
Installation of Removable Pins for Hinged Door.
FAA holder: Airbus Helicopters Canada Limited
Installation of IKHANA Aircraft Services wing box assembly.
FAA holder: IKHANA Group Inc.
Installation of aft fuselage microvanes.
FAA holder: Lynden Air Cargo LLC
Manufacturing and Installation of the Fuselage Attachment.
FAA holder: Aerotech Industries
Installation of left-hand passenger entry door.
FAA holder: Aztec Nomad Inc.
Installation of electric inflatable door seal.
FAA holder: TALCO Aviation Corp.
Manufacture and installation of replacement wing tips.
FAA holder: Knots 2U Ltd.
Installation of wing tip extension and dorsal fin.
FAA holder: Knots 2U Ltd
Installation of provisions and parts for a wing fold system.
FAA holder: McCarthy Fred
Installation of the provisions and parts for a wing fold system.
FAA holder: Frederick C. McCarthy
Installation of Wing Tip Hard Point Provisions.
FAA holder: Avcon Industries Inc
Installation of a Talon LED Replacement Wing and Tail Mounted Anti-Collision Lights.
FAA holder: Aaxico Technical Services Inc.
Installation of Window Shade Assembly as the replacement for OEM polarized window assemblies.
FAA holder: Aviation Fabricators Inc
Installation of AirWorks Cockpit Door Surveillance Systems.
FAA holder: Aero Technik Inc.
Installation of the 27" X 36" Fuselage Cut-Out with FS 281 - 321.
FAA holder: Rocky Mountain Aircraft
Installation of plywood covering on the bottom of the wing center section.
FAA holder: Great Lakes Aircraft Company LLC
Installation of IKHANA Station 332 Bulkhead Door.
FAA holder: IKHANA Aircraft Canada Inc.
Installation of Lee Aerospace Inc. Window Panel B.
FAA holder: Lee Aerospace Inc.
Installation of an overhead flight crew rest above Door 1.
FAA holder: B/E Aerospace Inc - FSI
Installation of an overhead flight attendant crew rest at Door 3.
FAA holder: B/E Aerospace Inc - FSI
Modifies the main wing spar center section carry through.
FAA holder: T-34 Mentors LLC
Modification of the horizontal stabilizer front spar.
FAA holder: T-34 Mentors LLC
Installation of vortex generators on the wing and verticle tail, and strakes on the nacelles.
FAA holder: Micro AeroDynamics Inc
The Forward and Aft Crew Door Rod Assembly Replacement.
FAA holder: Transwest Helicopters Ltd
Installation of Bick Airstair door.
FAA holder: PMA Design & Manufacturing Inc.
Attachment of fabric covering and wing leading edge.
FAA holder: C William Pancake Jr
Installation of Brittain Industries 20-gallon wing tip tanks.
FAA holder: General Aviation Modifications Inc..
Installation of Brittain Mark II20-gallon wing tip tanks(P/N 2009).
FAA holder: General Aviation Modifications Inc.
Installation of a C/X band fuselage nose radome shell.
FAA holder: The NORDAM Group LLC
Installation of inflatable door seal.
FAA holder: TALCO Aviation Corp. dba RAJAY Turbo Products
Installation of inflatable door seal.
FAA holder: TALCO Aviation Corp. dba RAJAY Turbo Products
Installation, maintenance and operations of XCAM Pod on Starboard Wing Strut.
FAA holder: J&C Engineering Services LTD
Installation of a stone floor finishing.
FAA holder: Embraer Engineering & Technology Center - USA Inc.
Heated (LH) Side Canopy Window Assembly replacement installation.
FAA holder: Lee Aerospace Inc.
Installation of the CRJ Passenger Door Piano Hinge Replacement.
FAA holder: Altitude Aerospace Inc
Installation of winglets, wing structural reinforcement, and related system changes.
FAA holder: Winglet Technology LLC
Installation of Passenger Window Plugs.
FAA holder: Ancra International LLC
Installation of the Honeywell Fuselage Anti-Collision Light (FACL) System.
FAA holder: Honeywell International Inc
Installation of a window in the aft clamshell doors.
FAA holder: Metro Aviation Inc
Installation of Replacement Wing Strut Fitting and Empennage, Empennage Attachments and related Aft Fuselage Structures.
FAA holder: Aircraft Structures International Corp
Installation of replacement passenger door windows.
FAA holder: The NORDAM Group LLC