Aircraft STC directory
Boeing 747SR Series STCs
The Jun 30, 2026 FAA DRS snapshot contains 83 selected supplemental type certificates with status Current whose public applicability data names the Boeing 747SR Series. Use it to identify modification scope and recorded holders—not to determine serial-number effectivity, compatibility, installation approval, or commercial availability.
Modification demand surface
Recorded holders
Recently revised 747SR Series STCs
Showing the 83 most recently revised records. Each entry links to the FAA source and separates public approval data from private commercial claims.
Installation of floor proximity emergency escape path marking system.
FAA holder: Bruce Aerospace Inc.
Installation of Automatic Dependent Surveillance-Broadcast (ADS-B) antennas.
FAA holder: Amphenol Cable and Interconnect Technologies, Inc.
Installation of a Honeywell Communications Management Unit and a VHF communication system.
FAA holder: Amphenol Cable and Interconnect Technologies, Inc.
Installation of a Universal Avionics Systems Corporation multi-function display.
FAA holder: Amphenol Cable and Interconnect Technologies, Inc.
Installation of GPS antenna provisions.
FAA holder: Amphenol Cable and Interconnect Technologies, Inc.
Installation of a Honeywell Enhanced Ground Proximity Warning System per Electronic Cable Specialists Master Data List ECS-201546 latest FAA approved revision.
FAA holder: Amphenol Cable and Interconnect Technologies, Inc.
Installation of a Universal Avionics Systems Corporation (UASC) Terrain Awareness and Warning System (TAWS) and UASC UNS-1F Flight Management System (FMS) as a position source for TAWS or installation of a UASC TAWS and triple UASC FMS.
FAA holder: Amphenol Cable and Interconnect Technologies, Inc.
Installation of a L-3 Communications PVI 600 Multi-Function Display in accordance with Electronic Cable Specialists Master Data List ECS-202760, Revision A, dated November 3, 2004, or later FAA approved revision.
FAA holder: Amphenol Cable and Interconnect Technologies Inc.
Installation of elementary or enhanced surveillance Mode S transponders.
FAA holder: Amphenol Cable and Interconnect Technologies Inc.
Install ERDA model 7004 HI-LO table with slide top.
FAA holder: Collins Aerospace
Installation of the EMTEQ LED Anti-collision Light.
FAA holder: Woven Electronics LLC
Installation of the Mark VII ground proximity and windshear warning system.
FAA holder: Honeywell International Inc
Installation of the Honeywell DAA-4A Dual Antenna Drive Unit.
FAA holder: Honeywell International Inc
Replace core assembly of Janitrol Constant Speed Drive (CSD) oil cooler, part number 76D94-1, on 747 aircraft equipped with General Electric CF6-50 engines, in accordance with Honeywell LORI Sealed Drawing List SDL3524-1, Revision A, dated 11 October 2005 or later FAA approved revision.
FAA holder: Honeywell International Inc.
Installation of Teledyne Controls Wireless Ground Link - Quick Access Recorder (WQAR).
FAA holder: Teledyne Controls
Replace core assembly of AiResearch Bleed Air Precooler.
FAA holder: Honeywell International Inc.
Recore of Hamilton Standard heat exchanger, P/N 719235-8, -9 in accordance with Honeywell LORI Sealed Drawing List SDL3786-1 Rev. B, dated September 28, 2005 or later FAA approved revision.
FAA holder: Honeywell International Inc.
Replace core assembly of AiResearch APU Oil Cooler, part number 157790.
FAA holder: Honeywell International Inc.
Installation of Hughes passenger entertainment/passenger service multiplex system.
FAA holder: Burrana Inc.
Modify the wing fuel tanks access cover installation by replacing the existing rubstrip and seal with a new encapsulated wire mesh gasket and a new seal.
FAA holder: Aviation Devices & Electronic Components LLC
Modify the wing fuel tanks access cover installation by replacing the existing rubstrip and seal with a new encapsulated wire mesh gasket and a new seal.
FAA holder: Aviation Devices & Electronic Components LLC
Installation of Avionica satLINK MAX with optional Personality Module (avPM) in the Cabin Compartment overhead, and optional avRDC MAX QAR in the EE Bay.
FAA holder: Archeion Holdings LLC
Installation of a fuselage nose radome shell (X-band).
FAA holder: The NORDAM Group LLC
Installation of an Avionica, Inc. avWiFi wireless router system.
FAA holder: Archeion Holdings LLC
Installation of Container Offset Restraint System on an existing unit load device pallet to restrain an International Organization for Standardization (ISO) 1CC Freight Shipping Container that is side loaded on the aircraft.
FAA holder: Kalitta Air LLC
Installation of a revised interior arrangement.
FAA holder: B/E Aerospace Inc - FSI
Installation of refrigerated air cargo container for lower lobe.
FAA holder: Telair International LLC
Installation of LD-3 Cargo Container, P/N DCT 1250.
FAA holder: Telair International LLC
Installation of Container Baggage/Freight LD-3 Type.
FAA holder: Telair International LLC
Modification of Boeing 747 by installation of cargo container.
FAA holder: Telair International LLC
Installation of LD3 Cargo Containers.
FAA holder: Telair International LLC
Installation of GTAX LD3 Cargo Containers.
FAA holder: Telair International LLC
Install Brooks & Perkins cargo container, P/N 17701-E-100.
FAA holder: Telair US LLC
Install lower deck cargo restraining system.
FAA holder: Telair US LLC
Installation of Center Guide Assembly, P/N 46675-101, -102, -103, -104, -105.
FAA holder: Telair US LLC
Installation of Brownline lower compartment cargo pallet restraint system, P/N 45478-102 or 45145-102.
FAA holder: Telair US LLC
Install Brooks & Perkins cargo container P/N 17609-E-100.
FAA holder: Telair US LLC
Installation Brooks & Perkins cargo container.
FAA holder: Telair US LLC
Make and install P/N 17455-100 cargo container.
FAA holder: Telair US LLC
The number 2 Cockpit Side Windows installed.
FAA holder: Sierracin/Sylmar Corporation
Installation of Communication Management Unit.
FAA holder: Canard Aerospace Corporation
Modify the PACK Systems with a National Aircraft Service, Inc. B747 Flow Control System.
FAA holder: National Aircraft Service Inc
Installation of LED cabin lighting (LED tubes and drivers) as replacement for the Bigorre fluorescent wash lighting tubes and ballasts as applicable in the Executive Cabin Area only.
FAA holder: DER Services, Inc.
Installation of lightweight window plugs.
FAA holder: LiteAir Aviation Products Inc
Installation of upper deck lightweight window plugs.
FAA holder: LiteAir Aviation Products Inc
Replacement of NAS3610-2L1C cargo containers with L size pallets and nets in accordance with DAS-1-WE Approved Drawing List No. COA 8-2017 dated July 27, 1977 or later FAA approved revisions.
FAA holder: United Airlines Inc
Replacement of the Exhaust Gas Temperature indicators with B&D Instruments Models 65006-003, 65006-004, 65006-005, 65006-006, 65006-007. Recording Exhaust Gas Temperature indictors in accordance with B&D Installation Manual 65006-003-011, Revision D dated November 19, 1996 or later FAA approved revision; and Flight Manual Supplement 65006-003-013 dated July 26, 1993, Flight Manual Supplement 65006-003-014 dated October 3, 1994, or Flight Manual Supplement 65006-003-015, 65006-003-16 or 65006-003-017 dated November 16, 1996.
FAA holder: Teledyne Controls
Installation of a Mark X gaming partition.
FAA holder: AIM Aviation Inc
Installation of L-3 FA2100CVR Cockpit Voice Recorder in accordance with Chippewa Aerospace Master Drawing List (MDL) No. B747-2371-0001, Rev. 3, Dated December 19, 2010, or later FAA approved revision.
FAA holder: Chippewa Aerospace, Inc.
Installation of an L-3 Communications Micro Quick Access Recorder (MQAR).
FAA holder: Chippewa Aerospace, Inc.
Installation and replacement of steel brake components.
FAA holder: NASCO Aircraft Brake Inc
Installation of replacement fuel tank sealant system.
FAA holder: FFC Manufacturing
Installation of Rockwell Collins Traffic Alert and Collision Avoidance System (TCASII).
FAA holder: Rockwell Collins Inc
Installation of a coffee maker conversion kit on an aircraft.
FAA holder: Radford and Associates Inc.
Installation of Aerofex livestock carrier P/N TS-QA-400 platform and panel system using size A or size M Class II pallet.
FAA holder: Equine Air Transport Systems LLC
Installation of mounting provisions for dual NavAero t?Bag C22 Electronic Flight Bags.
FAA holder: Kalitta Air LLC
Installation of stretcher carrier P/N AM2003.
FAA holder: Air Medic LLC
Installation of Digital Flight Data Acquisition Unit and Solid State Flight Data Recorder.
FAA holder: Canard Aerospace Corporation
Modification of Collins 618M-4 VHF COMM Receiver Transmitter Installation to a 618M-5 VHF COMM Receiver Transmitter installation with either a Gables G7406-02 or Avtech 7522-1-2 VHF COMM Receiver Transmitter Control Series using with Collins Installation Instructions as listed on AML No. ST00525WI-D, or later FAA approved revisions.
FAA holder: Rockwell Collins Inc
Modification of the upper deck crew escape slide.
FAA holder: Evergreen Intl Airlines Inc
Installation of Goodrich Corporation No. 300498 Fuel Quantity Indicating System.
FAA holder: Goodrich Corporation Fuel & Utility Systems
Installation of BFGoodrich No. 20191 remote fuel height measurement sticks.
FAA holder: BF Goodrich Aerospace
Installation of flame reistant cargo covers.
FAA holder: Air Transport International LLC.
Installation of sunvisor system for pilot and copilot.
FAA holder: Rosen Sunvisor Systems LLC
Manufacture of service carts for galley stowage.
FAA holder: JK Aerospace Inc.
Installation of Butterfly Valve Ring AIR23028 in starter control valves, part number 775538 or 799700.
FAA holder: Cook Airtomic
Install Espresso/Cappuccino Machine P/N 3510-0066-01.
FAA holder: B/E Aerospace Inc.
Replacement of emergency evacuation slides BFG P/N 7A1104 series with BFG P/Ns 7A1348-1 or 7A1348-2.
FAA holder: Goodrich Corporation
Installation of B.F. Goodrich emergency evacuation slide/rafts, BFG P/N's 7A1437 and 7A1439, in place of BFG emergency evacuation slides P/N's 7A1101, 7A1102, and7A1103 or BFG emergency evacuation slide/rafts P/N's 7A1340 and 7A1342.
FAA holder: Goodrich Corporation
In the 747-100B, 747-200C, and747SR installation of B.F. Goodrich emergency evacuation slide/rafts, BFG P/Ns 7A1340 and7A1342, in place of BFG emergency evacuation slides, P/Ns 7A1101, 7A1102, and 7A1103.
FAA holder: Goodrich Corporation
This design change consists of replacement of B.F. Goodrich off-wing emergency evacuation slides, P/N 7A1105, series and7A1252 series with BFG P/Ns7A1346 series and 7A1414 series respectively and replacement of BFG off-wing ramp P/Ns 7A1107 series and 7A1254 series with BFG P/N 7A1344 series.
FAA holder: Goodrich Corporation
Installation of BFG P/N 5A2789 lower decorative cover assembly on door No. 3. (747-300C).
FAA holder: Goodrich Corporation
Modification of B.F. Goodrich slide/raft assemblies 7A1238, 7A1257, and 7A1261.
FAA holder: Goodrich Corporation
Manufacture of a Sterling Beverage System (SBS) portable beverage dispensing system, P/N 12-0001, in accordancd with SBS, Inc., Master Drawing List Report No. 20001, dtd 6/30/00, or later FAA approved revision. Aircraft installation in accordance with SBS Drawing No. 12012, "Galley Interface Criteria," dtd 11/14/00, or later FAA approved revision. Model applicability listed on AML No. ST02224AT is a required part of this STC.
FAA holder: Sterling Beverage Systems, Inc
Installation of Model 840037-108, 840037-112, and 840037-113 Transient Suppression Devices on Boeing 747 Classic Airplanes fitted with Honeywell Analog Fuel Quantity Indication Systems.
FAA holder: Butler National Corporation