Aircraft STC directory
Cessna Aircraft 150 STCs
The Jun 30, 2026 FAA DRS snapshot contains 63 selected supplemental type certificates with status Current whose public applicability data names the Cessna Aircraft 150. Use it to identify modification scope and recorded holders—not to determine serial-number effectivity, compatibility, installation approval, or commercial availability.
Modification demand surface
Recorded holders
Recently revised 150 STCs
Showing the 63 most recently revised records. Each entry links to the FAA source and separates public approval data from private commercial claims.
Installation of Wipaire Skis Inc. Model A-2000A (Aircraft Skis) (FluiDyne) (Federal) Main and NA-800 Nose Skis.
FAA holder: F.Atlee Dodge Aircraft Services
Installation of replacement control surface skin panels.
FAA holder: Athena Aircraft, LLC
Install STOL kit (wing leading edge cuffs, drooped tips, stall fences and aileron gap seals). (152 LANDPLANE).
FAA holder: Curry Aviation LLC
Fabrication and installation of Alaskan Bushwheel LLC tail wheel and fork assembly.
FAA holder: ABI, LLC
Installation of Flight Boss LTD S-RPE-CO Rudder Pedal Extensions.
FAA holder: Flight Boss Ltd.
Install the BRS-150 Parachute Recovery System.
FAA holder: Ballistic Recovery Systems Inc.
Remove drain plug AN-806-6 from fuel line drain in belly of aircraft and replace with drain valve MT-101-1. (See limitations).
FAA holder: Saf-Air Products Inc.
Installation of Avidyne Corporation Traffic Advisory System (TAS).
FAA holder: Avidyne Corporation
Installation of J.P. Instruments temperature monitoring systems.
FAA holder: J P Instruments
Installed Brittain Industries, Inc., B2D Flight Control System.
FAA holder: Brittain Industries, Inc
Installation of Brittain Industries Model B2C Flight Control System.
FAA holder: Brittain Industries, Inc
Installation of the Concorde FLA or VRSLA RG series batteries.
FAA holder: Concorde Battery Corporation
Installation of an oil cooler system.
FAA holder: Steve's Aircraft
Fabrication and Installation of the Airglas Inc Landes PA32-206LA Nose Fork equipped with up to a 8.50 x 6 tire.
FAA holder: Airglas Inc.
Installation of Stene Aviation, Inc. Wing Tips with LED lights.
FAA holder: Stene Aviation Inc
Installation of an alternator and regulator as a replacement to existing OEM generators and mechanical voltage regulators.
FAA holder: Hartzell Engine Technologies, LLC
Installation of the Precise Flight stand-by vacuum system (SVS).
FAA holder: Precise Flight Inc
Installing copper electrical cables. (182 S/N 33000 THRU 33842) (8E 833 and UP).
FAA holder: Bogert Aviation
Installation of a hydraulically actuated ski drag assembly.
FAA holder: Northern Airframes LLC
Installation of Alaskan Bushwheel TSO-C26d wheels, Part Number (P/N) ABI-1010.
FAA holder: ABI, LLC
Installation of a Jasco #6540 (35a.) Alternator Kit or a Jasco #6555 (50a.) Alternator Kit.
FAA holder: Hartzell Engine Technologies, LLC
Installation of split seam wing strut cuff as replacement parts for the strut fairings.
FAA holder: Stene Aviation Inc
Installation of a FreeFlight Systems Universal Access Transceiver - Automatic Dependent Surveillance Broadcast Class B1 System (UAT-ADS-B) Out.
FAA holder: Southeast Aerospace Inc
The installation of the Latitude Technologies Corporation S100 Tracking System.
FAA holder: Latitude Technologies Corporation
Install SAF-T-STOP auxiliary seat stop device.
FAA holder: Glen A Florence, Aero Technologies, Inc.
Installation of Avidyne Corporation MLX770 MultiLink Broadcast Transceiver P/N 700-00163-( ), Sensor Systems Inc. Antenna P/N S67-1575-109, or equivalent, and optional Avidyne Mounting Tray P/N 700-00165-000.
FAA holder: Avidyne Corporation
Operation of airplane on unleaded automotive gasoline.
FAA holder: Petersen Aviation Inc
Installation of a Digital Engine Monitoring system.
FAA holder: Ultra Electronics Flightline Systems
Installation of aileron and flap gap seals.
FAA holder: Gator Aerial Enterprises
Installation of Hoskins Twilighter Mark I High Intensity Light System consisting of a Single Condenser Discharge (Strobe) Model 3 Fuselage Light.
FAA holder: BF Goodrich Aerospace
Installation of Filtrator Company Engine Crankcase Breather and Vacuum Pump Air-Oil Separator in accordance with the applicable FAA sealed drawing listed on the attached Master Eligibility List Number SA2219WE.Installation of Filtrator Company engine crankcase breather and vacuum pump air-oil separator.
FAA holder: D'Shannon Products Ltd.
Installation of a BAS tail pull handle in the aft fuselage.
FAA holder: BAS Inc
Installation of Grimes aviation white anti-collision strobe light system two light or three light series 555 for wing tips and tail, P/N 30-0555-( ).
FAA holder: Honeywell International Inc.
Installation of Jetton Alert II alarm system.
FAA holder: Jetton Aircraft
Installation of FMK Light Emitting Diode (LED) Instrument Panel Lights.
FAA holder: Forest Kirst
Installation of the Lord Corporation Nose Wheel Shimmy Damper P/N SE-1051.
FAA holder: Lord Corporation
Installation of a GDL 69 or GDL 69A XM Satellite Receiver in accordance with Garmin Supplemental Type Certificate Master Data List, P/N 005-C0217-00, Revision A, dated December 20, 2004, or later FAA approved revision.
FAA holder: Garmin AT Inc.
Superseded by STC SA01944CH. Modify airplane to fly on unleaded automotive gasoline, 87 minimum antiknock index.
FAA holder: EAA Aviation Foundation
Installation of a PXE7300SR, In-Flight Entertainment System.
FAA holder: PS Engineering Incorporated
Conversion from trigear to conventional gear configuration.
FAA holder: Del-Air
Installation of Sensenich 74DM6S5 Propeller; Elano Exhaust System, P/N EL 099001-063 and -060; and Cessna Muffler, P/N 0454011-1, in accordance with FAA Approved ACT Report No. 104, dated February 10, 1992, or later FAA approved revisions. STC SA4795SW for the installation of Lycoming 0-320-E2D engine is required as part of this installation.
FAA holder: Del-Air
Installation of an Avco Lycoming O-360 or O-320 engine and increase airplane gross weight.
FAA holder: Del-Air
Conversion of tricycle landing gear to conventional tailwheel landing gear.
FAA holder: Air Classic Rebuilders LLC
Installation of George M. Adams DGA-2000 wheels and Bodell Mfg Model BMI-252 brakes.
FAA holder: Skybound Manufacturing Inc.
Wet-to-dry vacuum pump conversion kit 300-3.
FAA holder: Parker Hannifin Corp
Cockpit sun visor installation.
FAA holder: Rosen Sunvisor Systems LLC
Modification to remove the Standard Airworthiness Certificate and placing them in 'Special Airworthiness Certificate-Primary Category' to allow the pilot-owner to perform preventative maintenance beyond what is allow under Part 43, Appendix A.
FAA holder: Original Primary Category Aircraft Training School (TOPCAT)
Installation of Avidyne Corporation Datalink Coupler, part number 700-00015-000 per Avidyne Corporation Master Document List, Document No. AVACP-006 dtd 1/2/93 or later FAA-approved revisions.
FAA holder: Avidyne Corporation
Installation of vortex generators on the wings and tail surfaces of the above model aircraft in accordance with Drawing Package MA2171, Revision IR, dated July 17, 2002, and Installation Manual MA2172, Revision IR, dated September 6, 2002, or later FAA approved revision of either of these documents. NOTE: If more than five vortex generators are damaged or missing, the aircraft is not airworthy.
FAA holder: Micro AeroDynamics Inc
Installation of William C. Roberts stainless steel brake discs P/N 201-195 SS 201-260 SS, 201-440 SS, 201-40 SS in lieu of Cessna, carbon steel brake discs, Cessna P/N B-30195, C164-26A, C-30440, C164-40 respectively.
FAA holder: Flight Life, Inc.
Installation of McFarlane Aviation Flap Roller Assembly Service Kit MCSK100.
FAA holder: McFarlane Aviation, Inc.
Installation of Lycoming 150 or 160 hp Model O-320 engine.
FAA holder: Williams Robert or Barbara
Installation of a combination radio/throttle/gust lock.
FAA holder: RT Aerospace Corp
Installation of engine cowling and firewall fasteners. (150 S/N 15060088 THRU15079405) (A150K S/N A1500001 THRU A1500684)).
FAA holder: Skybolt Aeromotive Corp
Installation of a low voltage warning system.
FAA holder: Stark's Aviation
Installation of air filters.
FAA holder: Brackett Aero Filters Inc.