SA1219EAPropellers
Installation of a Sensenich Model 72CKS6-0-56 -54 or -52 metal propeller and a S72CK spinner assembly.
FAA holder: Sensenich Propeller Company
Aircraft STC directory
Cessna Aircraft 152 STCs
The Jun 30, 2026 FAA DRS snapshot contains 51 selected supplemental type certificates with status Current whose public applicability data names the Cessna Aircraft 152. Use it to identify modification scope and recorded holders—not to determine serial-number effectivity, compatibility, installation approval, or commercial availability.
51
listed Current at snapshot
34
holder directories
12
modification categories
Sep 27, 2023
latest recorded revision
Modification demand surface
Other aircraft modifications17
Engine and powerplant8
Fuel systems5
Flight controls4
Aircraft structures4
Electrical systems3
Cabin and interiors3
Landing gear and brakes2
Aircraft connectivity2
Propellers1
Cargo and special mission1
Avionics1
Recorded holders
Del-Air5Curry Aviation LLC2Avidyne Corporation2McFarlane Aviation Inc2Dynamic Propeller2S-TEC Corporation2EAA Aviation Foundation2Sensenich Propeller Company1Athena Aircraft, LLC1Flight Boss Ltd.1Ballistic Recovery Systems Inc.1PECO Inc1Saf-Air Products Inc.14J's Aviation1Concorde Battery Corporation1Airglas Inc.1Precise Flight Inc1Bogert Aviation1Hartzell Engine Technologies, LLC1Stene Aviation Inc1
Recently revised 152 STCs
Showing the 51 most recently revised records. Each entry links to the FAA source and separates public approval data from private commercial claims.
View record
SA00709SEFlight controls
Installation of replacement control surface skin panels.
FAA holder: Athena Aircraft, LLC
SA909CEFlight controls
Install STOL kit (wing leading edge cuffs, drooped tips, stall fences and aileron gap seals). (152 LANDPLANE).
FAA holder: Curry Aviation LLC
SA02415CHFlight controls
Installation of Flight Boss LTD S-RPE-CN Rudder Pedal Extensions.
FAA holder: Flight Boss Ltd.
SA64CHCargo and special mission
Install the BRS-150 Parachute Recovery System.
FAA holder: Ballistic Recovery Systems Inc.
SA1235SOFuel systems
Replacement of the lower fuselage fuel drain cap (P/N AN929-6) with an adapter type coupling, (belly drain P/N MT-101) and an exposed quick drain valve P/N CAV-160D). (A152 SERIES AIRPLANES STARTING WITH MODEL150F (S/N 15061533) AND SUBSEQUENT).
FAA holder: Saf-Air Products Inc.
SA1008NWEngine and powerplant
Installation of a Sensenich S72CKS6-0-52, -54, or -56 propeller/spinner assembly on Lycoming O-235-L2C or O-235-L2C(M)* engine.
FAA holder: 4J's Aviation
SA02013CHOther aircraft modifications
Installation of Avidyne Corporation Traffic Advisory System (TAS).
FAA holder: Avidyne Corporation
SA1003GLEngine and powerplant
Installation of a cooling shroud on engine driven dry air pumps.
FAA holder: McFarlane Aviation Inc
SA01118WIOther aircraft modifications
Installation of the Concorde FLA or VRSLA RG series batteries.
FAA holder: Concorde Battery Corporation
SA01538SEOther aircraft modifications
Incorporation of bushing on carburetor hot air box control arm.
FAA holder: Dynamic Propeller
SA02069AKLanding gear and brakes
Fabrication and Installation of the Airglas Inc Landes PA32-206LA Nose Fork equipped with up to a 8.50 x 6 tire.
FAA holder: Airglas Inc.
SA01454SEOther aircraft modifications
Incorporation of a nylon sleeve on the carburetor heat cable housing to prevent abrasion of the cable.
FAA holder: Dynamic Propeller
SA2162NMOther aircraft modifications
Installation of the Precise Flight stand-by vacuum system (SVS).
FAA holder: Precise Flight Inc
SA3531NMElectrical systems
Installing copper electrical cables. (182 S/N 33000 THRU 33842) (8E 833 and UP).
FAA holder: Bogert Aviation
SA971WEElectrical systems
Installation of a Jasco #6540 (35a.) Alternator Kit or a Jasco #6555 (50a.) Alternator Kit.
FAA holder: Hartzell Engine Technologies, LLC
SA02248LAElectrical systems
Installation of Sensor Pod and wiring for a passenger operated monitoring system.
FAA holder: Sky IMD Inc
SA02262SEAircraft structures
Installation of split seam wing strut cuff as replacement parts for the strut fairings.
FAA holder: Stene Aviation Inc
SA475CHOther aircraft modifications
Installation of Inline Air Filter Kit, P/N CV1J4-C.
FAA holder: Aerotech Components Inc
SA1270GLCabin and interiors
Install SAF-T-STOP auxiliary seat stop device.
FAA holder: Glen A Florence, Aero Technologies, Inc.
SA00281BOAircraft connectivity
Installation of Avidyne Corporation MLX770 MultiLink Broadcast Transceiver P/N 700-00163-( ), Sensor Systems Inc. Antenna P/N S67-1575-109, or equivalent, and optional Avidyne Mounting Tray P/N 700-00165-000.
FAA holder: Avidyne Corporation
SA2048CEOther aircraft modifications
Operation of airplane on unleaded automotive gasoline.
FAA holder: Petersen Aviation Inc
SA02434NYEngine and powerplant
Installation of a Digital Engine Monitoring system.
FAA holder: Ultra Electronics Flightline Systems
SA3851NMAircraft structures
Installation of a BAS tail pull handle in the aft fuselage.
FAA holder: BAS Inc
SA7590SWCabin and interiors
Install FLIR pod on right wing, remove R/H passenger seat and install viewing equipment.
FAA holder: Airline Fueling Inc.
SA6037SW-DOther aircraft modifications
Installation of S-TEC System 40/50, single and two axis automatic flight guidance system, Model ST-298-40/50.
FAA holder: S-TEC Corporation
SA4057WEEngine and powerplant
Installation of a muffler and exhaust heat exchanger.
FAA holder: Aero Fabricators Co
SA06037SW-DOther aircraft modifications
Installation of S-TEC System 40/50 Single and Two Axis Automatic Flight Guidance Systems.
FAA holder: S-TEC Corporation
SA09224SCEngine and powerplant
Installation of a modified Textron Lycoming O-235 engine (modified for use of only ethanol for fuel).
FAA holder: Maximum Performance Inc.
SA3659SWOther aircraft modifications
Installation of Jetton Alert II alarm system.
FAA holder: Jetton Aircraft
SA1809WEFuel systems
Installation of one twelve-gallon auxiliary fuel tank in each outboard wing panel.
FAA holder: Flint Aero Inc
SA02137ATLanding gear and brakes
Installation of the Lord Corporation Nose Wheel Shimmy Damper P/N SE-1051.
FAA holder: Lord Corporation
SA01119CHOther aircraft modifications
Replace Cessna Sun visor assemblies with Aircraft Recycled Flying controls tinted Sun Visor Assemblies.
FAA holder: Plane Plastic Ltd
SA01487SE (5 OF 5Aircraft connectivity
Installation of a GDL 69 or GDL 69A XM Satellite Receiver in accordance with Garmin Supplemental Type Certificate Master Data List, P/N 005-C0217-00, Revision A, dated December 20, 2004, or later FAA approved revision.
FAA holder: Garmin AT Inc.
SA789GLEngine and powerplant
Superseded by STC SA01944CH. Installation of Lycoming O-235-L2C engine modified in accordance with STC SE790GL in combination with propellers: Sensenich 72CK-S6-0-54 or McCauley 1A103/TCM6958. This allows airplane to fly on unleaded automotive gasoline, 87 minimum antiknock index.
FAA holder: EAA Aviation Foundation
SA865GLOther aircraft modifications
Superseded by STC SA01944CH. Modify airplane to fly on unleaded automotive gasoline, 87 minimum antiknock index.
FAA holder: EAA Aviation Foundation
SA02795ATCabin and interiors
Installation of a PXE7300SR, In-Flight Entertainment System.
FAA holder: PS Engineering Incorporated
SA2846SWOther aircraft modifications
Conversion from trigear to conventional gear configuration.
FAA holder: Del-Air
SA3788NMEngine and powerplant
Installation of Sensenich 74DM6S5 Propeller; Elano Exhaust System, P/N EL 099001-063 and -060; and Cessna Muffler, P/N 0454011-1, in accordance with FAA Approved ACT Report No. 104, dated February 10, 1992, or later FAA approved revisions. STC SA4795SW for the installation of Lycoming 0-320-E2D engine is required as part of this installation.
FAA holder: Del-Air
SA4795SWEngine and powerplant
Installation of an Avco Lycoming O-360 or O-320 engine and increase airplane gross weight.
FAA holder: Del-Air
SA1814NMAircraft structures
Installation of Lompoc Aero Specialties inner plexiglass pane in swing out window frames presently employing a single window plexiglass in accordance with Lompoc Aero Specialties FAA sealed Eligibility List dated January 4, 1983, together with their FAA sealed Installation Instructions dated September 20, 1982, or later FAA approved revisions. Manufacturer of the windows is controlled by Lompoc Aero Specialties drawings LAS 1012 dated August 6, 1982, LAS 1013 dated October 5, 1982, and LAS 1014 dated October 6, 1982, or later FAA approved sealed revisions.
FAA holder: G & D Aero Products Inc.
SA3688NMOther aircraft modifications
Cockpit sun visor installation.
FAA holder: Rosen Sunvisor Systems LLC
SA09643SCOther aircraft modifications
Modification to remove the Standard Airworthiness Certificate and placing them in 'Special Airworthiness Certificate-Primary Category' to allow the pilot-owner to perform preventative maintenance beyond what is allow under Part 43, Appendix A.
FAA holder: Original Primary Category Aircraft Training School (TOPCAT)
SA00419NYOther aircraft modifications
Installation of cockpit utility light.
FAA holder: Burns Richard G
SA01074WIFlight controls
Installation of McFarlane Aviation Flap Roller Assembly Service Kit MCSK100.
FAA holder: McFarlane Aviation, Inc.
SA01065SEOther aircraft modifications
Installation of vortex generators on the wings and vertical tail surfaces of the above model aircraft per Drawing Package MA2081, Revision IR, dated January 15, 2002, and Installation Manual MA2082, Revision IR, dated February 13, 2002, or later FAA approved revision of either of these documents.NOTE: If more than five vortex generators are damaged or missing, the aircraft is not airworthy.
FAA holder: Micro AeroDynamics Inc