Aircraft STC directory
Cessna Aircraft 172F STCs
The Jun 30, 2026 FAA DRS snapshot contains 43 selected supplemental type certificates with status Current whose public applicability data names the Cessna Aircraft 172F. Use it to identify modification scope and recorded holders—not to determine serial-number effectivity, compatibility, installation approval, or commercial availability.
Modification demand surface
Recorded holders
Recently revised 172F STCs
Showing the 43 most recently revised records. Each entry links to the FAA source and separates public approval data from private commercial claims.
Installation of L-3 Communications Avionics Systems.
FAA holder: Acron Aviation Inc.
Remove drain plug, Cessna Part Number MS20913-10 or MS20913-1D, from the fuel selector valve and replace with Part Number CAV-110D (MT-1072) or CAV-110H-4D (CM-1072).
FAA holder: Saf-Air Products Inc.
Installation of Baumann Model BF2550A floats. For models 172I through 172P, a gross weight of 2350 lbs. at a center of gravity range of plus 39.5 inches to plus 45.5 inches is approved. For models R172K and R172K with STCs SA1436CE and SA1437CE, the maximum gross weight is limited to 2550 lbs. at a center og gravity range of plus 39.5 inches to plus 45.5 inches.
FAA holder: Baumann Floats LLC
Installation of a GDC 31 Roll Steering Converter.
FAA holder: DAC International Inc
Installation instructions for Gross Weight Increase.
FAA holder: Air Plains Services Corporation
Installation of Lycoming O-360-A1A180 h.p. engine and Hartzell HC- C2YK-1A/7666A-0 propeller.
FAA holder: Kenmore Air Harbor Inc
Installation of AMSAFE Aviation Inflatable Restraints.
FAA holder: AMSAFE Inc.
Installation of a Three Point Torso Restraint System.
FAA holder: Alpha Aviation Inc
Installation of Centurion Consulting, Inc. GPS Steering Assist Module (SAM) with roll steering (p/n 0025-5100), or without roll steering (p/n 0025-5200).
FAA holder: Icarus Avionics, LLC
Fabrication and installation of F. Atlee dodge Aircraft Services, Cessna Tie-Down clamp.
FAA holder: F. Atlee Dodge Aircraft Services, LLC
Installation of Electronics International Inc. Glass Panel Engine Monitor (with In-Flight Data) MVP-50P.
FAA holder: Electronics International Inc.
Installation of Glareshield per FAA Approved Ashby Glareshield Master Drawing List.
FAA holder: Aircraft Spruce and Specialty Co.
Installation of EDO 89-2000 floats modified.
FAA holder: X-Winds S.T.O.L. Inc.
Installation of Knots 2U, Ltd Wheel and Body Fairings.
FAA holder: Knots 2U Ltd.
Modification to install an air-oil separator to prevent oil from being aspirated from the engine breather line (47J series w stc's SH4-235SW, SH4-826SW or SH479SW).
FAA holder: M-20 Oil Separators LLC
Installation of the Aero Vent Cabin Ventilation System.
FAA holder: Knots 2U Ltd.
Installation of J.P. Instruments temperature monitoring systems.
FAA holder: J P Instruments
Installation of external aerodynamic Vortelator Kit on airplanes.
FAA holder: Aircraft Development Co
Installation of a GTX 32 (mode C), GTX 33 (mode S), or GTX 33D (mode S with diversity) Remote Transponde.
FAA holder: Garmin AT Inc.
Installation of a BAS, Inc., or a Blancher Model 101 stowable seat.
FAA holder: Lake Vue Aeronautics
Installation of the KMD 250 Multi-Function Display System with Optional Internal VFR GPS and Optional Traffic and Weather Sensors.
FAA holder: Honeywell International Inc
Installation of 7-gallon or 15-gallon extended range wing fuel tanks; manufactured and installed.
FAA holder: Del-Air
Installation of FMK Light Emitting Diode (LED) Instrument Panel Lights.
FAA holder: Forest Kirst
Installation of a Shadin Co. fuel flow indicating system.
FAA holder: Shadin Avionics
Installation of Graphic Engine Monitors (GEM) Models GEM-610 and GEMINI 1200.
FAA holder: Insight Instrument Corporation
Replace Cessna Sun Visor assemblies with Aircraft Replacement Fabricated Components tinted Sun Visor Assemblies.
FAA holder: Vantage Plane Plastic Ltd
Installation of Wipaire 2100 amphibian/seaplane floats.
FAA holder: Wipaire Inc
Installation of Electronics International model UBG-16 or UBG-16T bar graph engine analyzer.
FAA holder: Electronics International
Installation of flap gap seal per Aircraft Development Co. Drawing List 114-1 stamped FAA approved with a date of April 27, 2005 or later. Conformity data for Drawing List 114-1 is derived from Drawing List 114-1 Revision C and STC s SA1484CE, SA1490CE, SA1491CE, SA1492CE, SA1493CE, SA1494CE, and SA1495CE.
FAA holder: Aircraft Development Co
Installation of aileron gap seal per Aircraft Development Co. Drawing List 115-1 stamped FAA approved with a date of April 27, 2005 or later. Conformity data for Drawing List 115-1 is derived from Drawing List 115-1 Revision D and STC s SA1484CE, SA1490CE, SA1491CE, SA1492CE, SA1493CE, SA1494CE, and SA1495CE.
FAA holder: Aircraft Development Co
Modification of right hand side door to provide an openable window.
FAA holder: Ellis & Associates CADD/Technical Illustrations
Installation of Garmin AT Model GDL90 UAT Data Link System, in accordance with Garmin AT, Inc., GDL 90 UAT Master Data List, P/N 560-0278-01, Revision A, dated November 12, 2004, or later FAA approved revision.
FAA holder: Garmin AT Inc.
Cockpit sunvisor retrofit kit.
FAA holder: Rosen Sunvisor Systems LLC
Installation of hydraulically controlled variable pitch 3 blade MTV-12-B/183-17 propeller.
FAA holder: MT- Propeller Entwicklung GmbH
Installation of Aero Advantage ADV200 series vacuum pump per Aero Advantage Drawing Number ADVMSI 500 latest FAA approved revision.
FAA holder: Aero Holdings Ltd. a Texas limited partnership
Installation of CO Guardian Remote Carbon Monoxide Detector Instrument.
FAA holder: CO Guardian LLC
Installation of fluoropolymer film.
FAA holder: Columbia Pacific Airlines
Installation of the following Aerospace Logic aircraft instruments: EGT-100 Exhaust Gas Temperature Indicator, CHT-100 Cylnder Head Temperature INdicator, FL-100 Dual Fuel Level Indicator, FP-100 Fuel Pressure and Ammeter Indicator, OL-100 Oil Pressure and Temperature Indicator, and VA-100 Voltmeter and Ammeter Indicator.
FAA holder: Aerospace Logic Inc.
Installation of CO Guardian Carbon Monoxide Detector Instrument.
FAA holder: CO Guardian LLC