Aircraft STC directory
Cessna Aircraft 175 STCs
The cited FAA DRS record snapshots contain 76 selected supplemental type certificates with status Current whose public applicability data names the Cessna Aircraft 175. Use it to identify modification scope and recorded holders—not to determine serial-number effectivity, compatibility, installation approval, or commercial availability.
Modification demand surface
Recorded holders
Recently revised 175 STCs
Showing the 76 most recently revised records. Each entry links to the FAA source and separates public approval data from private commercial claims.
Installation of alternate avionics support assembly.
FAA holder: Radiorax Aviation Systems LLC
Installation of Aqua Model 2200 floats.
FAA holder: Outpost X Aviation Inc.
Installation of Model 2400 Aqua floats. (175 FLOATPLANE CONFIGURATION).
FAA holder: Outpost X Aviation Inc
Installation of replacement flap trailing edge bulbs with AOG Drawing.
FAA holder: Athena Aircraft, LLC
Installation of replacement control surface skin panels.
FAA holder: Athena Aircraft, LLC
Installation of Cleveland wheel No. 40-97A and brake No. 30-63A.
FAA holder: Kaman Corporation Aircraft Wheel & Brake LLC
Installation of FlightLogic Synthetic Vision Electronic Flight Information System (EFIS-SV).
FAA holder: Genesys Aerosystems Inc.
Installation of Baumann Model BF-2550 floats.
FAA holder: Baumann Floats LLC
Installation of Flight Boss LTD S-RPE-CO Rudder Pedal Extensions.
FAA holder: Flight Boss Ltd.
Installation of a Three Point Torso Restraint System.
FAA holder: Alpha Aviation Inc
Installation of Brittain Industries Model B2C Flight Control System.
FAA holder: Brittain Industries, Inc
Installation of the Concorde FLA or VRSLA RG series batteries.
FAA holder: Concorde Battery Corporation
Fabrication and Installation of interior fiberglass trim panels.
FAA holder: Selkirk Aviation
Installation of Stene Aviation, Inc. Wing Tips with LED lights.
FAA holder: Stene Aviation Inc
Installation of the Precise Flight stand-by vacuum system (SVS).
FAA holder: Precise Flight Inc
Installation of Skymotive jump door model 62-500.
FAA holder: Sheridan Sky Sports
Installation of a Jasco #6540 (35a.) Alternator Kit or a Jasco #6555 (50a.) Alternator Kit.
FAA holder: Hartzell Engine Technologies, LLC
To remove right door for hauling sky divers, picture making and etc.
FAA holder: Eric J. Barnhill
Install SAT-T-STOP auxiliary seat stop device.
FAA holder: Glen A Florence, Aero Technologies, Inc.
Installation of a Digital Engine Monitoring system.
FAA holder: Ultra Electronics Flightline Systems
Installation of aileron and flap gap seals.
FAA holder: Gator Aerial Enterprises
Installation of Doyn swept-tail assembly kit 1400.
FAA holder: D'Shannon Products Ltd.
Installation of Lycoming O-360-A1D engine and McCauley 2D36C14/78KM-4 or Hartzell HC-C2YK-1A/7666-2 propeller in accordance with Doyn Aircraft Drawing List for Model 1700 conversion dated May 6, 1964; for Cessna Model 175B: Atlas Aviation Oil Cooler Installation dated September 12, 1967, is required.
FAA holder: D'Shannon Products Ltd.
Installation of a Continental IO-360-C engine, McCauley D2A34C propeller and associated accessories.
FAA holder: Centurion Enterprises 65XLLC
Replacement of tricycle landing gear with conventional (tail-wheel) landing gear.
FAA holder: Stoots Aviation David S. Stoots
Installation of Knots 2U, Ltd Wheel and Body Fairings.
FAA holder: Knots 2U Ltd.
Installation of the Aero Vent Cabin Ventilation System.
FAA holder: Knots 2U Ltd.
Installation of Cleveland Main Wheels and Brakes.
FAA holder: F Atlee Dodge Aircraft Service
Installation of a BAS, Inc., or a Blancher Model 101 stowable seat.
FAA holder: Lake Vue Aeronautics
Installation of windshield P/Ns W-2056, W/T-2056 or W/G-2056.
FAA holder: Great Lakes Aero Products Inc
Installation of vortex generators on wings, horizontal and vertical tail surfaces.
FAA holder: Micro AeroDynamics Inc
Installation of an engine electronic tachometer, Model P-1000.
FAA holder: Horizon Instruments Inc
Installation of flap gap seal per Aircraft Development Co. Drawing List 114-1 stamped FAA approved with a date of April 27, 2005 or later. Conformity data for Drawing List 114-1 is derived from Drawing List 114-1 Revision C and STC s SA1484CE, SA1490CE, SA1491CE, SA1492CE, SA1493CE, SA1494CE, and SA1495CE.
FAA holder: Aircraft Development Co
Installation of a PXE7300SR, In-Flight Entertainment System.
FAA holder: PS Engineering Incorporated
Wet-to-dry vacuum pump conversion kit 300-2.
FAA holder: Parker Hannifin Corp
Installation of Lycoming model O-360-A4M engine, McCauley model 1A200/DFA8242 propeller, two oil coolers, engine exhaust system, four NACA scoops for cabin and oil cooler ram air and a triple banner tow/release mechanism. Limited to installation on Cessna 175, serial number 55238 ONLY.
FAA holder: Bruckner William M. Jr.
Cockpit sunvisor installation.
FAA holder: Rosen Sunvisor Systems LLC
Installation of McFarlane Aviation Flap Roller Assembly Service Kit MCSK100.
FAA holder: McFarlane Aviation, Inc.
Replacement of right front seat with stretcher.
FAA holder: Aviation Fabricators Inc
Installation of engine cowling and firewall fasteners.
FAA holder: Skybolt Aeromotive Corp
Replace existing engine induction air filter with AC Spark Plug filter.
FAA holder: Brackett Aero Filters Inc.