Aircraft STC directory
Cessna Aircraft 175C STCs
The Jun 30, 2026 FAA DRS snapshot contains 56 selected supplemental type certificates with status Current whose public applicability data names the Cessna Aircraft 175C. Use it to identify modification scope and recorded holders—not to determine serial-number effectivity, compatibility, installation approval, or commercial availability.
Modification demand surface
Recorded holders
Recently revised 175C STCs
Showing the 56 most recently revised records. Each entry links to the FAA source and separates public approval data from private commercial claims.
Installation of Aqua Model 2200 floats.
FAA holder: Outpost X Aviation Inc.
Installation of replacement control surface skin panels.
FAA holder: Athena Aircraft, LLC
STOL kit installation (wing leading edge cuffs, drooped tips, stall fences, and aileron gap seals). (R172K LANDPLANE AND FLOATPLANE) (172RG LANDPLANE ONLY).
FAA holder: Curry Aviation LLC
Installation of a MT-Propeller model(s) MTV-15-B/[203-210]-58 or MTV-9-B/[198-200]-52 propeller with matching spinner assembly.
FAA holder: McFarlane Aviation LLC
Installation of Cleveland wheel No. 40-97A and brake No. 30-63A.
FAA holder: Kaman Corporation Aircraft Wheel & Brake LLC
Installation of FlightLogic Synthetic Vision Electronic Flight Information System (EFIS-SV).
FAA holder: Genesys Aerosystems Inc.
Installation of Flight Boss LTD S-RPE-CO Rudder Pedal Extensions.
FAA holder: Flight Boss Ltd.
Remove drain plug, Cessna Part Number MS20913-10 or MS20913-1D, from the fuel selector valve, and replace with CAV-110D (MT-1075) or CAV-110H-4D (CM-1075).
FAA holder: Saf-Air Products Inc.
Installation of SDI CFS-1000, CFS-1001, or FT-100 fuel flow indicating system and facet P/N 480543 auxiliary fuel pump. (175C LANDPLANE ONLY).
FAA holder: Del-Air
Installation of a Three Point Torso Restraint System.
FAA holder: Alpha Aviation Inc
Installation of Brittain Industries Model B2C Flight Control System.
FAA holder: Brittain Industries, Inc
Installation of the True Lock Safety Retention Axle Lock Nut System.
FAA holder: True Lock LLC
Fabrication and Installation of interior fiberglass trim panels.
FAA holder: Selkirk Aviation
Fabrication and Installation of the Airglas Inc Landes PA32-206LA Nose Fork equipped with up to a 8.50 x 6 tire.
FAA holder: Airglas Inc.
Installation of Stene Aviation, Inc. Wing Tips with LED lights.
FAA holder: Stene Aviation Inc
Installation of the Precise Flight stand-by vacuum system (SVS).
FAA holder: Precise Flight Inc
Installation of Skymotive jump door model 62-500.
FAA holder: Sheridan Sky Sports
Installation of a Jasco #6540 (35a.) Alternator Kit or a Jasco #6555 (50a.) Alternator Kit.
FAA holder: Hartzell Engine Technologies, LLC
Installation of Domed (Bubble) Window.
FAA holder: Great Lakes Aero Products Inc
Installation of split seam wing strut cuff as replacement parts for the strut fairings.
FAA holder: Stene Aviation Inc
Installation of a Continental O-470 series engine, McCauley propeller, engine mount, cowling, baffles, and associated parts on the Cessna 175 and P172D series aircraft.
FAA holder: Mark Wiebe
Installation of BAS, Inc. TSO Shoulder Harness and BAS Inc. Harness System.
FAA holder: BAS Inc
Install SAT-T-STOP auxiliary seat stop device.
FAA holder: Glen A Florence, Aero Technologies, Inc.
Installation of a Digital Engine Monitoring system.
FAA holder: Ultra Electronics Flightline Systems
Installation of Plane Booster Kit 101-C 1000 in accordance with Upper Valley Drawing 101-24250-6, dated January 10, 1965, and Installation Instructions, Revision 2, dated June 3, 1968.
FAA holder: Cub Crafters Inc
Replacement of tricycle landing gear with conventional (tail-wheel) landing gear.
FAA holder: Stoots Aviation David S. Stoots
Installation of BAS, Inc. tail pull handle in the aft fuselage.
FAA holder: BAS Inc
Installation of the Aero Vent Cabin Ventilation System.
FAA holder: Knots 2U Ltd.
Installation of Cleveland Main Wheels and Brakes.
FAA holder: F Atlee Dodge Aircraft Service
Installation of a BAS, Inc., or a Blancher Model 101 stowable seat.
FAA holder: Lake Vue Aeronautics
Installation of airflow register into baggage compartment cover and insert a screened vent into empennage inspection plate.
FAA holder: Plane Plastics Ltd.
Installation of windshield P/Ns W-2056, W/T-2056 or W/G-2056.
FAA holder: Great Lakes Aero Products Inc
Installation of one 12-gallon auxiliary fuel tank in each outboard wing panel.
FAA holder: Flint Aero Inc
Replace Cessna Sun Visor assemblies with Aircraft Replacement Fabricated Components tinted Sun Visor Assemblies.
FAA holder: Vantage Plane Plastic Ltd
Installation of an engine electronic tachometer, Model P-1000.
FAA holder: Horizon Instruments Inc
Installation of Hartzell HC-C2YR-1BF/F8477-4 or HC-C2YK-1BF/F8477-4 propeller and Hartzell model C1576 damper assembly.
FAA holder: Hartzell Propeller Inc
Superseded by STC SA01944CH. Modify airplane to fly on unleaded automotive gasoline, 87 minimum antiknock index.
FAA holder: EAA Aviation Foundation
Installation of a PXE7300SR, In-Flight Entertainment System.
FAA holder: PS Engineering Incorporated
Installation of Lompoc Aero Specialties inner plexiglass pane in swing out window frames presently employing a single window - in accordance with Lompoc Aero Specialties FAA sealed Eligibility List dated January 4, 1983, together with their FAA sealed Installation Instructions dated September 20, 1982, or later FAA approved revisions. Manufacturer of the windows is controlled by Lompoc Aero Specialties drawings LAS 1012 dated August 6, 1982, LAS 1013 dated October 5, 1982, and LAS 1014 dated October 6, 1982, or later FAA approved sealed revisions.I.
FAA holder: G & D Aero Products Inc.
Wet-to-dry vacuum pump conversion kit 300-2.
FAA holder: Parker Hannifin Corp
Cockpit sunvisor installation.
FAA holder: Rosen Sunvisor Systems LLC
Install a Lycoming O-360 series engine and Hartzell, McCauley, or Sensenich propeller.
FAA holder: Del-Air
Replacement of right front seat with stretcher.
FAA holder: Aviation Fabricators Inc
Installation of S-TEC System 55/55X Two Axis Automatic Flight Guidance System, Model ST-633,.
FAA holder: S-TEC Corporation
Installation of engine cowling and firewall fasteners.
FAA holder: Skybolt Aeromotive Corp
: Installation of vacuum stall warning system as either the primary or as a secondary stall warning system in accordance with drawings and instructions listed in AML SA00919SE.
FAA holder: Inconceivable Aviation LLC
Installation of vortex generators on wings and tail surfaces.
FAA holder: Micro AeroDynamics Inc
Replace existing engine induction air filter with AC Spark Plug filter.
FAA holder: Brackett Aero Filters Inc.