Aircraft STC directory
Cessna Aircraft 182R STCs
The Jun 30, 2026 FAA DRS snapshot contains 112 selected supplemental type certificates with status Current whose public applicability data names the Cessna Aircraft 182R. Use it to identify modification scope and recorded holders—not to determine serial-number effectivity, compatibility, installation approval, or commercial availability.
Modification demand surface
Recorded holders
Recently revised 182R STCs
Showing the 100 most recently revised records. Each entry links to the FAA source and separates public approval data from private commercial claims.
Installation of Teledyne Continental Motors Model IO-520-D engine and either a McCauley Model D3A34C401/90DFA-10 or Hartzell Model PHC-C3YF-1RF/F8468A( )-6R or PHC-C3YF-1RF/F7691( ) or PHC-G3YF-1RF/F8468A( )-6Ror PHC-G3YF-1RF/F7691( ) 3-blade propeller.
FAA holder: Air Plains Services Corporation
Installation of a Teledyne Continental Motors Model IO-550-D engine and either a Hartzell Model PHC-C3YF-1RF/F8468A( )-6R or PHC-C3YF-1RF/F7691( ) or PHC-G3YF-1RF/F8468A( )-6R or PHC-G3YF-1RF/F7691( )or McCauley Mod D3A34C401/90DFA-10 3-blade propeller.
FAA holder: Air Plains Services Corporation
Installation of alternate avionics support assembly.
FAA holder: Radiorax Aviation Systems LLC
Installation of replacement flap trailing edge bulbs with AOG Drawing.
FAA holder: Athena Aircraft, LLC
Replace existing horizontal stabilizer skins.
FAA holder: Athena Aircraft, LLC
Installation of FlightLogic Synthetic Vision Electronic Flight Information System (EFIS-SV).
FAA holder: Genesys Aerosystems Inc.
Installation of Flight Boss LTD S-RPE-CN Rudder Pedal Extensions.
FAA holder: Flight Boss Ltd.
Install BRS-182 parachute recovery system.
FAA holder: Ballistic Recovery Systems Inc.
Installation of Airwolf Filter Corp. Air Oil Separator.
FAA holder: Airwolf Filter Corporation
Installation of Airwolf Filter Corp. Air Oil Separator.
FAA holder: Airwolf Filter Corporation
Installation of a Left Hand Aft removable window.
FAA holder: Textron Aviation Inc
Installation of Brittain Pneumatic Pitch Assist.
FAA holder: Brittain Industries, Inc
Installation of Dynamic Propellers carburetor heat air box top skin.
FAA holder: Dynamic Propeller
Installation of Dynamic Propellers support brackets.
FAA holder: Dynamic Propeller
Installation of Brittain Industries Pitch Assist Model PC-1 with Altitude Hold.
FAA holder: Brittain Industries, Inc
Installation of Brittain Pneumatic Pitch Assist Model PC-1.
FAA holder: Brittain Industries, Inc
Autopilot and optional nav-coupler 'add-on' BI-300, BI-301, or BI-304.
FAA holder: Brittain Industries, Inc
Installation of Brittain Industries Model CSA-1 Stability Augmentation System.
FAA holder: Brittain Industries, Inc
Installation of Brittain Industries Model B2C Flight Control System.
FAA holder: Brittain Industries, Inc
Installation of Brittain Industries Model B-5 Flight Control System.
FAA holder: Brittain Industries, Inc
Installation of Inline Air Filter Kit, P/N CV1J4-C.
FAA holder: Aerotech Components Inc
Install SAF-T-STOP auxiliary seat stop device.
FAA holder: Glen A Florence, Aero Technologies, Inc.
Installation of Becker Avionics SAR DF-517 Search and Rescue Direction Finding System.
FAA holder: Rhotheta USA Inc.
Installation of Doyn fiberglass wheel fairings.
FAA holder: D'Shannon Products Ltd.
Installation of a McCauley C234C204/90DCB-8 propeller to a Teledyne Continental Motors Model O-470-U modified.
FAA holder: John Jewell Aircraft Inc
Installation of a McCauley C234C204/90DCB-8 propeller to a Teledyne Continental Motors Model O-470-U modified.
FAA holder: John Jewell Aircraft Inc
Installation of a pair of fixed, extended flap with tab, cowl cooling flaps in lieu of the movable cowl flaps.
FAA holder: Horsham Aviation Services
Installation of two tinted, flush cockpit skylights.
FAA holder: Yingling Aircraft Inc
Fabrication and installation of F. Atlee dodge Aircraft Services, Cessna Tie-Down clamp.
FAA holder: F. Atlee Dodge Aircraft Services, LLC
Install Aero Fabricators shoulder harness and seat belt assembly.
FAA holder: Aero Fabricators Co
Installation of North American Surveillance Systems Strut Mount and Optional Cloud Cap Technologies TASE / TASE Dou Gimbals.
FAA holder: North American Surveillance Systems LLC
Installation of an external infrared imaging system.
FAA holder: Paravion Technology Inc
Installation of Knots 2U, Ltd Wheel and Body Fairings.
FAA holder: Knots 2U Ltd.
Installation of the Aero Vent Cabin Ventilation System.
FAA holder: Knots 2U Ltd.
Installation of a BAS, Inc., or a Blancher Model 101 stowable seat.
FAA holder: Lake Vue Aeronautics
Installation of the Courtesy Light Kit.
FAA holder: Knots 2U Ltd.
Installation of MT-Propeller Model MTV-9-D/195-18b hydraulic 3-blade constant speed propeller.
FAA holder: MT- Propeller Entwicklung GmbH
Installation of vapor cycle air conditioning system.
FAA holder: Flightcool Inc.
Installation of NPX138N-XXX FM Transceiver.
FAA holder: Northern Airborne Technology Ltd
Installation of VENTUBE pilot/co-pilot overhead fresh air valves. (195 SERIES LC-126A; LC-126B; LC-126C).
FAA holder: Soros Inc. a Texas Corporation
Installation of the Knots 2U Flight Lite System.
FAA holder: Knots 2U Ltd.
Installation of McCauley propeller model D3A36C435/80VEA-0.
FAA holder: McCauley Propeller Systems
Installation of flap gap seal per Aircraft Development Co. Drawing List 114-1 stamped FAA approved with a date of April 27, 2005 or later. Conformity data for Drawing List 114-1 is derived from Drawing List 114-1 Revision C and STC s SA1484CE, SA1490CE, SA1491CE, SA1492CE, SA1493CE, SA1494CE, and SA1495CE.
FAA holder: Aircraft Development Co
Installation of aileron gap seal per Aircraft Development Co. Drawing List 115-1 stamped FAA approved with a date of April 27, 2005 or later. Conformity data for Drawing List 115-1 is derived from Drawing List 115-1 Revision D and STC s SA1484CE, SA1490CE, SA1491CE, SA1492CE, SA1493CE, SA1494CE, and SA1495CE.
FAA holder: Aircraft Development Co
Modification of right hand side door to provide an openable window.
FAA holder: Ellis & Associates CADD/Technical Illustrations
Installation of Wulfsberg P-2000 and/or C-2000-RT-2000 transceiver system.
FAA holder: Wulfsberg Electronics Division
Installation of the Aerocet 3400 Amphibious Float conversion.
FAA holder: Seaplanes West Inc.
Installation of Chelton Aviation Corp. AP-3C autopilot in accordance with Master Drawing List No. MS-008-12, Rev I.R., dated March 31, 2004, or later FAA approved revision. FAA approved Airplane Flight Manual MS-008-14, Rev. I.R., dated July 26, 2004, or later approved revision is required.
FAA holder: Chelton Aviation Corporation
Installation of fuel inlets and caps. (TR182 S/N R18200584 THRU R18202032) (T182 S/N 18266591 THRU18268542).
FAA holder: Hartwig Aircraft Fuel Cell Repair
Installation of canvas hammock seat.
FAA holder: Stoots Aviation/David A. Stoots
Installation of Precise Flight Model 100(electric) Speedbrake System.
FAA holder: Precise Flight Inc
Installation of Seaplanes West Replacement Engine Mount.
FAA holder: Seaplanes West Inc.
Installation of Fibre Glass Reinforced Plastic Nacelle Fairing, Trade Name 'Exhaust Fairing".
FAA holder: Maple Leaf Aviation Ltd
Installation of Texas Skyways engine mount.
FAA holder: Texas Skyways Inc
Installation of modified engine and propeller system.
FAA holder: Texas Skyways Inc
Installation of Technisonic Industries Ltd OSAT-100 Airborne Position/Data Communicator.
FAA holder: Technisonic Industries Limited
Replacement of right front seat with stretcher.
FAA holder: Aviation Fabricators Inc
Installation of Airborne Position/Data Communicator.
FAA holder: Technisonic Industries Limited
Installation of model FB-02 'Fixed Arm' Pilot Arm Rest on R/H side of pilot seat and optional GPS Support Arm System.
FAA holder: Quality Aircraft Components LC