SR00517ATAircraft structures
Installation of a Quick-Mount Kit for the FLIR Systems, Inc. Model 2000/2500/3000 Series thermal Imager and Model U6000 Series Thermal Imager, to mount to the lower fuselage.
FAA holder: Bell Helicopter Textron Inc.
FAA STC category
Aircraft structures STCs
Fuselage, wing, floor, door, window, frame, and other structural changes. This directory contains 1,149 selected records listed with status Current in the June 30, 2026 FAA DRS snapshot and links every entry to its source.
Showing 601–720 of 1,149Page 6 of 10
View record
SB03071CHAircraft structures
Replace the Cameron Balloons US burner with Thunder and Colt Stratus triple burner installed via the standard burner frame gimbal block.
FAA holder: Cameron Balloons US
SA161WEAircraft structures
Installation of door on the left side of airplane.
FAA holder: Univair Aircraft Corporation
SA00494SEAircraft structures
Replace existing fuselage stringers with Cub Crafters, Inc. Model 105700 stringers in accordance with Cub Crafters, Inc. Master Drawing List, MDL 105700, Revision B, dated January 8, 1998, and its listed date or later Federal Aviation Administration approved revision.
FAA holder: Cub Crafters Inc
SA00495SEAircraft structures
Replace existing floor boards with Cub Crafters, Inc. Model 102600 floor boards in accordance with Cub Crafters, Inc. Master Drawing List, MDL 102600, Revision E, dated December 15, 1997, and its listed data or later Federal Aviation Administration approved revision.
FAA holder: Cub Crafters Inc
SA00703SEAircraft structures
Install right side access door in accordance with Cub Crafters, Inc. Master Drawing List, MDL 105900, Revision B, dated May 25, 1999, and its listed data or later Federal Aviation Administration approved revision.
FAA holder: Cub Crafters Inc
SA01350SEAircraft structures
Install replacement wing assembly in accordance with Cub Crafters, Inc. Master Drawing List, 123400MDL, Revision C, dated December 8, 2003, and Installation Instructions Document CR123410II, Revision NC, dated September 23, 2003, or later Federal Aviation Administration approved revision.
FAA holder: Cub Crafters Inc
SA01378SEAircraft structures
Install replacement fuselage tube or tube reinforcement.
FAA holder: Cub Crafters Inc
SA460SWAircraft structures
Install wing tips in accordance with Cub Crafters, Inc. Master Drawing List., MDL102400, Revision C, dated May 30, 2001, or later FAA approved revision.
FAA holder: Cub Crafters Inc
SA708SWAircraft structures
Installation of Plane Booster Safe Flight Wing Tips 101-28 in accordance with date in Upper Valley Aviation Report 101-28-180, dated October 4, 1966.
FAA holder: Cub Crafters Inc
SA900CEAircraft structures
Replace round wingtips with constant-chord, square tips and wing splates per Flanagan Aircraft Drawing List No. 1 dated February 1, 1975, or later Federal Aviation Administration approved revision.
FAA holder: Cub Crafters Inc
SA00009SEAircraft structures
Fiberglass wing tips and wing tip landing lights.
FAA holder: Aircraft Lighting & Components
ST03042NYAircraft structures
Installation of Fuselage Side Fairings.
FAA holder: Northrop Grumman Systems Corporation
SR09318RCAircraft structures
Fabrication, modification, and installation of a new vertical fin spar in accordance with Global Helicopter Technology, Inc., Drawing number VTF-030-800, Revision, E, dated June 6, 2001, or later FAA approved revision.
FAA holder: Global Helicopter Technology Inc.
SA1045WEAircraft structures
Installation of door-mounted inflatable evacuation slides in accordance with United Air Lines Approved Drawing List COA 6-3072/COA 6-3087. United Air Lines Supplemental Revision No. 1 dated August 25, 1965, to Douglas Airplane Flight Manual SM-19501, or Supplemental Revision No. 1 dated June 10, 1966, to Douglas AFM SM-19544 is required.
FAA holder: United Airlines Inc
SA2730NM-DAircraft structures
Install fuselage-mounted white anti-collision strobe lights.
FAA holder: United Airlines Inc
SA2737NM-DAircraft structures
Replace and relocate crew rest seats at Door 4R and install storage unit for duty free carts.
FAA holder: United Airlines Inc
ST00005LB-DAircraft structures
Install curtains around three passenger seats directly forward of door 3 right hand side. Also, install placards for the curtains. The curtains consist of a forward transverse curtain, the longitudinal curtain and the aft transverse curtain. The curtains are attached to PSU panel, sidewalls and curtain tracks. This modification was accomplished in accordance with United Air Lines, DAS-1-WE, Approved Master Drawing List No. 00005 dated May 19, 1995, or later FAA approved revisions.
FAA holder: United Airlines Inc
ST00549LA-DAircraft structures
Modifies existing Flight Data Acquisition Management System (FDAMS) Flight Recorder frame format database and replaces Oil Pressure indicators.
FAA holder: United Airlines Inc
ST01182SEAircraft structures
Installation of a flight deck door in accordance with Duganair Technologies Inc., Index List, QS-00001-3A, Revision B, dated August 27, 2003, or later FAA approved revisions. FAA Approved Flight Manual Supplement No. QWC737101-4, Revision 1, dated December 16, 2004, or later FAA approved revision is required as part of this installation.
FAA holder: Quiet Wing Technologies, Inc.
ST01444LAAircraft structures
: Installation of reinforced cockpit door in accordance with FAA Approved Duganair Technologies, Inc. MDL QS-00003, Revision J, dated April 1, 2003, or FAA approved revision (for 727-200 series airplanes) or MDL QS-00003, Revision L, dated July 21, 2003, or later FAA approved revision for both 727-100 and -200 series airplanes).
FAA holder: Quiet Wing Technologies, Inc.
ST01798LAAircraft structures
Installation of a flight deck door.
FAA holder: Quiet Wing Technologies, Inc.
ST02241LAAircraft structures
ONE ONLY STC, SN 20512: Installation of Quit Wing Transient Suppression Device and Float Level Sensor Adapter.
FAA holder: Quiet Wing Technologies, Inc.
ST01326WIAircraft structures
Installation of an Aux Window Blower System Upgrade on Learjet Model 31A-144. Data required: 1) LJSC Ltd. Master Document List MDL4049-25207, Revision A, dated March 28, 2005; and 2) LJSC Ltd. Airplane Flight Manual Supplement FMS4049-25207, Revision IR, dated May 4, 2005; or later FAA approved revisions to (1) or (2).
FAA holder: Global Aviation Technologies
ST03026NYAircraft structures
Installation of the Cockpit Door Hold Open Latch.
FAA holder: Field Aviation Company Inc
SA02331AKAircraft structures
Installation of a Secondary Forward Baggage Door Latch in accordance with Plane Miracles LLC Master Data List, MDL1125AK, Revision IR, dated January 6, 2009, or later FAA approved revision.
FAA holder: Karl Zeiset
SR00860ATAircraft structures
Manufacture of Replacement Crew Door Window.
FAA holder: Bell Helicopter Textron Inc.
SR01076ATAircraft structures
Manufacture of crew logging bubble window.
FAA holder: Bell Helicopter Textron Inc.
SR01133ATAircraft structures
Manufacture of baggage floor protectors.
FAA holder: Bell Helicopter Textron Inc.
SR01134ATAircraft structures
Manufacture of replacement passenger door window.
FAA holder: Bell Helicopter Textron Inc.
SR01286ATAircraft structures
Manufacture of crew vertical slide window.
FAA holder: Bell Helicopter Textron Inc.
SR01287ATAircraft structures
Manufacture of passenger vertical slide window.
FAA holder: Bell Helicopter Textron Inc.
SR01315ATAircraft structures
Manufacture of replacement chin bubble window assemblies.
FAA holder: Bell Helicopter Textron Inc.
SR01316ATAircraft structures
Manufacture of replacement electronic bay access door window assemblies.
FAA holder: Bell Helicopter Textron Inc.
SR01337ATAircraft structures
Manufacture of rubber mounted chin bubble window.
FAA holder: Bell Helicopter Textron Inc.
SA100CEAircraft structures
Installation of Hoskins Supplemental Model A or B High Intensity Wing Tip Lights, Model C Tail Light, with or without Model 1 or 2 High Intensity Fuselage Lights.
FAA holder: BF Goodrich Aerospace
SA103CEAircraft structures
Installation of Hoskins Supplemental Model B High Intensity Wing Tip Lights, Model C Tail Light, with or without Models 1 or 2 High Intensity Fuselage Lights.
FAA holder: BF Goodrich Aerospace
SA104CEAircraft structures
Installation of Hoskins Supplemental Model B High Intensity Wing Tip Lights, Model C Tail Light, with or without Models 1 or 2 High Intensity Fuselage Lights.
FAA holder: BF Goodrich Aerospace
SA106CEAircraft structures
Install Hoskins Model F or B Wing Tip Lights and Model C or K Tail Lights, with or without two Model 1 or 2 Fuselage Lights.
FAA holder: BF Goodrich Aerospace
SA107CEAircraft structures
Installation of Hoskins Supplemental Model A high intensity wing tip lights, model C or K tail lights, with or without models 1 or 2 high intensity fuselage lights.
FAA holder: BF Goodrich Aerospace
SA123CEAircraft structures
Installation of Model B high intensity wing tip lights, Model C tail lights, with or without models 1 or 2 high intensity fuselage lights.
FAA holder: BF Goodrich Aerospace
SA125CEAircraft structures
Installation of Hoskins Supplemental Model B of F High Intensity Wing Tip Lights, Model C or 30-0329-3 Dual Tail Light, with or without Model 2 High Intensity Fuselage Lights.
FAA holder: BF Goodrich Aerospace
SA192CEAircraft structures
Installation of Hoskins Supplemental Model A High Intensity Wing Tip Lights, Model C Tail Light with or without Models 2 High Intensity Fuselage Lights.
FAA holder: BF Goodrich Aerospace
SA236CEAircraft structures
Installation of Hoskins Supplemental Model B High intensity wing tip lights, Model C tail lights, with or without Model 2 high intensity fuselage lights.
FAA holder: BF Goodrich Aerospace
SA249CEAircraft structures
Install supplementary lighting system using Model B or Model F Wing Tip Lights, Model C or Model K Tail Light. Optionally, two Model 2 fuselage lights may also be used with Model B Wing Tip Lights.
FAA holder: BF Goodrich Aerospace
SA253CEAircraft structures
Installation of Hoskins Supplemental, Model E, High Intensity Wing Tip Lights, Model C Tail Light, with or without Model 2 High Intensity Fuselage Lights.
FAA holder: BF Goodrich Aerospace
SA263CEAircraft structures
Installation of Hoskins Supplemental Model A High Intensity Wing Tip Lights, Model C Tail Light, with or without Model 2 High Intensity Fuselage Lights.
FAA holder: BF Goodrich Aerospace
SA3660SWAircraft structures
Installation of Floor Proximity Lighting System in accordance with Vista Manufacturing, Inc., Drawing List DC-9-1000, Revision C, Dated October 7, 1986 or later FAA approved revision.
FAA holder: BF Goodrich Aerospace
SA3665SWAircraft structures
: Installation of Floor Proximity Lighting System in accordance with Vista Manufacturing, Inc., Drawing List DH-8-1000, Revision D, Dated December 02, 1986 or later FAA approved revision.
FAA holder: BF Goodrich Aerospace
SA3686SWAircraft structures
Installation of floor proximity lighting system.
FAA holder: BF Goodrich Aerospace
SA3687SWAircraft structures
: Installation of Floor Proximity Lighting System in accordance with Vista Manufacturing, Inc., Drawing List G1-1000, Revision C, Dated December 02, 1986 or later FAA approved revision.
FAA holder: BF Goodrich Aerospace
SA3693SWAircraft structures
: Installation of Floor Proximity Lighting System in accordance with Vista Manufacturing, Inc., Drawing Number FF27-1000, Revision C, Dated December 02, 1986 or later FAA approved revision.
FAA holder: BF Goodrich Aerospace
SA3702SWAircraft structures
Installation of Floor Proximity Lighting System in accordance with Vista Manufacturing, Inc., Drawing List DH7-1000, Revision D, Dated December 02, 1986 or later FAA approved revision.
FAA holder: BF Goodrich Aerospace
SA3704SWAircraft structures
Installation of Floor Proximity Lighting System in accordance with Vista Manufacturing, Inc., Drawing Number F27-1000, Revisions B, Dated December 02, 1986.
FAA holder: BF Goodrich Aerospace
SA3705SWAircraft structures
Installation of Floor Proximity Lighting System in accordance with Vista Manufacturing, Inc. Drawing number SD3-1000, Revision B, dated December 2, 1986, or later FAA approved revision.
FAA holder: BF Goodrich Aerospace
SA3768SWAircraft structures
Installation of Floor Proximity Lighting System in accordance with Vista Manufacturing, Inc. Drawing Number 727-1100, Revision C, Dated May 1, 1987.
FAA holder: BF Goodrich Aerospace
SA378CEAircraft structures
Installation of Hoskins Supplemental Model (A) High Intensity Wing Tip Lights, Model (D) or (K) Tail Lights.
FAA holder: BF Goodrich Aerospace
SA392CEAircraft structures
Install Hoskins Twilighter Mk V supplementary lighting system including Model E wing tip lights and Model C tal lights.
FAA holder: BF Goodrich Aerospace
SA398CEAircraft structures
Install Hoskins Twilighter MK III Supplemental Lighting System consisting of Model F Wing Lights with Model P or K (dual) Tail Light.
FAA holder: BF Goodrich Aerospace
SA399CEAircraft structures
Installation of Hoskins Supplemental Position Light System which includes Model B (Dual) Wing Tip Light, Model C, D, or K Tail Light with or without Model 2 Fuselage Lights.
FAA holder: BF Goodrich Aerospace
SA404CEAircraft structures
Installation of Hoskins supplemental position light system which includes Model A wing tip lights and Model D or K(dual) tail light.
FAA holder: BF Goodrich Aerospace
SA406CEAircraft structures
Installation of Hoskins Supplemental Position Light System which includes Model (A) Wing Tip Lights, Model 2 Fuselage Light used as a Tail Light or the Model L Tail Light.
FAA holder: BF Goodrich Aerospace
SA407CEAircraft structures
Installation of Hoskins Twilighter Mark III High Intensity Lighting System consisting of Model A Wing Tip Lights and Model D or Model P Tail Light.
FAA holder: BF Goodrich Aerospace
SA416CEAircraft structures
Installation of Hoskins Supplementary Twilighter Mark III High Lighting System encompassing Model A Single Wing Tip Lights and Model D (Dual) Tail Light or Tail Light Assembly per Hoskins Drawings 30-0208-3..
FAA holder: BF Goodrich Aerospace
SA431CEAircraft structures
Installation of Hoskins Twilighter Mk III supplemental lighting system with Model F wing tip and Model P tail lights.
FAA holder: BF Goodrich Aerospace
SA451CEAircraft structures
Install Hoskins Twilighter MK III Supplementary lighting system with Model E, F or P wing tip and Model C tail lights.
FAA holder: BF Goodrich Aerospace
SA472CEAircraft structures
Install Twilight MKIII Supplementary lighting system with model A wing tip and Model L tail lights.
FAA holder: BF Goodrich Aerospace
SA527CEAircraft structures
Installation of Hoskins Twilighter Mark I High Intensity Light System consisting of a Single Condenser Discharge (Strobe) Model 3 Fuselage Light.
FAA holder: BF Goodrich Aerospace
SA600CEAircraft structures
Install Hoskins Twilighter Mark III Supplemental Lighting System with Model P Wing Tip and Model K Tail Light. Data Required: Hoskins Specified Sheet P/N 65-0056 Dated March 5, 1968.
FAA holder: BF Goodrich Aerospace
SA90CEAircraft structures
Installation of Hoskins Supple- mental Model A or B, high intensity wing tip lights, Model C tail light, with or without Models 1 or 2 high intensity fuselage lights.
FAA holder: BF Goodrich Aerospace
SA91CEAircraft structures
Installation of Hoskins Supple- mental Model A or B high intensity wing tip lights.
FAA holder: BF Goodrich Aerospace
SA93CEAircraft structures
Installation of Model B High intensity wing tip lights, Model C Tail Light, with or without model 1 or 2 high intensity fuselage lights.
FAA holder: BF Goodrich Aerospace
SA97CEAircraft structures
Installation of Hoskins Supplemental High Intensity Position Light System consisting of Model A or B Wing Tip Lights, Model C or D Tail Lights with or without Model 1 or 2 Fuselage Lights.
FAA holder: BF Goodrich Aerospace
SA98CEAircraft structures
Installation of Hoskins Supplemental Model A, B, E high intensity wing tip lights, Model C tail light, with or without Model 2 high intensity fuselage light.
FAA holder: BF Goodrich Aerospace
SA99CEAircraft structures
Installation of Hoskins Supplemental Model A or B High Intensity Wing Tip Lights, Model C Tail Light, with or without Model 1 or 2 High Intensity Fuselage Lights.
FAA holder: BF Goodrich Aerospace
SA1649CEAircraft structures
Installation of either the tail safe support angles or a stub spar at the 3% chord station on the root rib of horizontal stabilizer.
FAA holder: D'Shannon Products Ltd.
SA1650CEAircraft structures
Installation of either the Tail Safe support angles or a Stub Spar at the 3% chord station on the root rib of the horizontal stabilizer per Smith Speed Conversions Drawing List No. 1006 with an FAA approved date of May 8, 1981, or later.
FAA holder: D'Shannon Products Ltd.
ST00734DEAircraft structures
Installation of three (3) fuselage optical window assemblies to support atmospheric research and meteorological observations in accordance with National Center for Atmospheric Research Optical Window Project Drawing List DL-100-09, Revision A, dated May 26, 2010 or later FAA approved revision. This installation is complemented by STC No. ST03056AT that provides the fuselage view port locations for the optical window assemblies.
FAA holder: National Science Foundation
ST03004NYAircraft structures
Installation of new MIL-C-5015 connectors at the wing to fuselage interface must be in accordance with Kelowna Flightcraft Ltd.Master Drawing List K116-00002 Revision NC, dated March 20, 2009 or later Transport Canada approved revision.
FAA holder: Kelowna Flightcraft Ltd
SA930SOAircraft structures
Installation of Beech Aircraft wing tip assemblies in accordance with Beryl D Shannon Aviation Specialties, Inc., Drawing B1990, dated December 15, 1976, or later FAA approved revision.
FAA holder: D'Shannon Products Ltd.
SA02183LAAircraft structures
Installation of Door Gas Springs in accordance with FAA approved Master Drawing List FIV-1000 Revision B dated March 13, 2010 or later FAA approved revision.
FAA holder: Fly In Vacations
SR01462ATAircraft structures
Manufacture of Door Openers in accordance with Aeronautical Accessories, Inc. Report No. AA-97046, Revision A, dated April 28, 1997 or later FAA approved revisions and installation per Report No. AA-96108, Revision A, dated June 25, 1996, or Report No. AA-96064, Revision C, dated April 15, 1997, or Report No. AA-95051, Revision B, dated April 10, 1997, or later FAA approved revisions.
FAA holder: Bell Helicopter Textron Inc.
SR01495ATAircraft structures
Manufacture of Baggage Floor Protectors in accordance with Aeronautical Accessories, Inc. Report No. AA-97051, no revision, dated March 27, 1997 or later FAA approved revisions and installation per Report No. AA-95046, Revision A, dated March 13, 1997, or later FAA approved revisions.
FAA holder: Bell Helicopter Textron Inc.
SA942SOAircraft structures
Installation of Adjustable Directional Trim Device on lower aft fuselage (ventral Location) in accordance with Beryl D Shannon Aviation Specialties, Inc., drawing B15001, dated May 30, 1977, or later FAA approved revision.
FAA holder: D'Shannon Products Ltd.
SB02996CHAircraft structures
Replace the Cameron Balloons US burner with Thunder & Colt (B2EU) and (B3EU)) Stratus double burner via standard burner frame gimbal block.
FAA holder: Cameron Balloons US
SB02997CHAircraft structures
Replace the Cameron Balloons US burner with Thunder & Colt (B2EU) and (B3EU)) Stratus double burner via standard burner frame gimbal block.
FAA holder: Cameron Balloons US
ST03924ATAircraft structures
Installation of Powertech Electronic Powered Window Shades in accordance with Aerospace Technologies Group (ATG) Engineering Drawing List LIEDL30001, Revision A, Dated October 20, 2008, or later FAA approved revision.
FAA holder: Aerospace Technologies Group Inc.
ST02994NYAircraft structures
a. Fuselage and wing Fatigue Life Expended (FLE) based on Quest s usage profile and recorded flight data. b. Fabrication and installation of the fuselage and wing identification placards in accordance with Quest Diagnostics document No.QDTBM-2010-007, Rev.A. c. The aircraft must be maintained in accordance with Section 6 (Instructions for Continued Airworthiness) of the Maintenance Plan for Continued Airworthiness, QDTBM-2010-006, Rev.A and dated June 13, 2011.
FAA holder: Quest Diagnostics
SA09145SCAircraft structures
Installation of vortex generators on wing upper surfaces in accordance with J.V.E., Inc. Drawing List JVE-501, Revision IR, dated 01/05/96, and Installation Manual JVE-0596, Revision IR, dated 01/05/96, or later FAA approved revisions.
FAA holder: D'Shannon Products Ltd.
SA02676CHAircraft structures
Installation of left and right hand fuselage external doublers per attached FAA Approved Model List (AML) No SA02676CH, issued June 8, 2011, or later FAA approved revision.
FAA holder: SRS Aviation LLC
SR01922ATAircraft structures
Manufacture of Locking Door Handle.
FAA holder: Bell Helicopter Textron Inc.
SR02021ATAircraft structures
Manufacture of Replacement Locking Door Handle in accordance with Aeronautical Accessories, Inc. Report No. AA-98026, no revision, dated February 11, 1998 or later FAA approved revisions and installation per Report No. AA-96072, Revision D, dated February 11, 1998, or later FAA approved revision.
FAA holder: Bell Helicopter Textron Inc.
SR02027ATAircraft structures
Manufacture of Replacement Crew Door Window Assembly in accordance with Aeronautical Accessories, Inc. Drawing List Report No. AA-99027, no revision, dated March 23, 1999, or later FAA approved revision, and installation per Report No. AA-99029, no revision, dated March 18, 1999, or later FAA approved revision.
FAA holder: Bell Helicopter Textron Inc.
SR02070ATAircraft structures
Manufacture of Baggage Floor Protector in accordance with Aeronautical Accessories, Inc. Drawing List Report No. AA-98097, no revision, dated October 2, 1998, or later FAA approved revisions, and installation per Aeronautical Accessories, Inc. Report AA-98091, no revision, dated July 27, 1998, or later FAA approved revisions.
FAA holder: Bell Helicopter Textron Inc.
SR02071ATAircraft structures
Manufacture of Replacement Crew Window in accordance with Aeronautical Accessories, Inc. Drawing List Report No. AA-98145, no revision, dated October 5, 1998, or later FAA approved revisions, and installation per Aeronautical Accessories, Inc. Report AA-98111, no revision, dated July 20, 1998, or later FAA approved revisions.
FAA holder: Bell Helicopter Textron Inc.
SR02072ATAircraft structures
Manufacture of replacement passenger window.
FAA holder: Bell Helicopter Textron Inc.
SR02074ATAircraft structures
Manufacture of Automatic Door Opener in accordance with Aeronautical Accessories, Inc. Drawing List Report AA-98109, no revision, dated October 30, 1998, or later FAA approved revisions, and installation per Aeronautical Accessories, Inc. Report AA-98099, no revision, dated July 7, 1998, or Report AA-98100, no revision, dated August 14, 1998, or Report AA-98105, no revision, dated July 9, 1998, or later FAA approved revision.
FAA holder: Bell Helicopter Textron Inc.
SR09320RC-DAircraft structures
Installation of the Right or Left Passenger Sliding Door Kit in accordance with drawings listed on Aeronautical Accessories, Inc. Drawing List Report AA-01080, Revision H, dated March 8, 2006, or later FAA approved revision and Instillation Instructions Report No. AA-01039, Revision E, dated February 10, 2006 or later FAA approved revision.
FAA holder: Bell Helicopter Textron Inc.
SA4942SWAircraft structures
Installation of Vortex control wing tip in accordance with Frakes Aviation Drawing No. FA-7042 dated 11/24/82, or later FAA approved revision.
FAA holder: Turbine Conversions Ltd
ST02984NYAircraft structures
Installation of Cockpit Floor Mounted Push to Talk Switch in accordance with ACS-NAI Ltd Modification Data Summary Number G987000 Revision N/C, dated March 4, 2011, or later Transport Canada approved revision.
FAA holder: Bombardier Aerospace
ST02954NYAircraft structures
Equipment Bay Access Door Steps Installation in accordance with ACS-NAI Modification Data Summary Number G743000, Revision A dated September 01, 2010 or later Transport Canada approved revision.
FAA holder: Flying Colours Corp
SR03806ATAircraft structures
Installation of Replacement Door Locking Handle in accordance with Aeronautical Accessories, Inc., Master Document List (MDL), Report No. AA-09012, Rev. F, dated September 13, 2010, or later FAA approved revision.
FAA holder: Bell Helicopter Textron Inc.
SR09252RCAircraft structures
Manufacture of Crew Photo Window in accordance with Aeronautical Accessories, Inc., Drawing List, Report No. AA-00032, Revision -, dated April 17, 2000, and installation of Crew Photo Window in accordance with Aeronautical Accessories Report No. AA-00022, Revision -, dated March 23, 2000, or later FAA approved revisions.
FAA holder: Bell Helicopter Textron Inc.
SA00857NYAircraft structures
Installation of a new Advanced Wing Technologies (AWT) wing and increase in gross weight to 6000 pounds.
FAA holder: Avionnerie Valdor Inc.
ST00719DEAircraft structures
Installation of structural fittings in the wing as provisions to accommodate future external stores in accordance with Sierra Nevada Corporation Drawing List, Report No MDL-0142-25-9316, Revision A, dated February 15, 2011, FAA approved March 29, 2011, or later FAA approved revision.
FAA holder: Sierra Nevada Corporation
SR02933NYAircraft structures
Installation of Automatic Door Opener Kits in accordance with Dart Aerospace Ltd. Installation Instructions IIN-D407-802 Revision A, dated October 13, 2010, TCCA approved November 19, 2010, or later TCCA approved revision.
FAA holder: Dart Aerospace Limited
SA02379AKAircraft structures
Installation of structural provisions for a fuselage top deck X-brace in accordance with F. Atlee Dodge Aircraft Services, LLC, drawing number 8031, Revision - , dated June 8, 2010 or later FAA approved revision.
FAA holder: F. Atlee Dodge Aircraft Services, LLC
SA02378AKAircraft structures
Installation of structural provisions for a fuselage side mounted baggage door in accordance with Alaska Aircraft Products, LLC drawing number 8029, Revision - , dated May 27, 2010 or later FAA approved revision.
FAA holder: Alaska Aircraft Products LLC.
SR09324RC-DAircraft structures
Installation of Passenger Photo Window in accordance with Aeronautical Accessories, Inc. Drawing List, Report No. AA-01095, Revision B, dated March 19, 2003, or later FAA/DAS approved revision.
FAA holder: Bell Helicopter Textron Inc.
SR09326RCAircraft structures
Development and Installation of High Visibility Crew Door in accordance with Aeronautical Accessories, Inc. Drawing List, Report No. AA-01073, No Revision, Dated July 20, 2001, or later FAA approved revision.
FAA holder: Bell Helicopter Textron Inc.
SR09338RC-DAircraft structures
Installation of passenger photo window in accordance with Aeronautical Accessories, Inc. Drawing List AA-02013, Revision F, dated October 14, 2005, or later DAS approved revision.
FAA holder: Bell Helicopter Textron Inc.
SR09372RC-DAircraft structures
High Visibility Crew Door Kits in accordance with Aeronautical Accessories, Inc. Drawing List, Report No. AA-03141, Revision B, dated March 4, 2004, or later DAS approved revisions; and installation per Report No. AA-03137, Revision A, dated February 9, 2004, and AA-03145, Revision A, dated February 25, 2004 or later DAS approved revisions.
FAA holder: Bell Helicopter Textron Inc.
SR09376RC-DAircraft structures
High Visibility Door Kits in accordance with Aeronautical Accessories, Inc. Drawing List, Report No. AA-05155, Revision G, dated January 25, 2007, or later DAS approved revision; and Installation Instructions Report No. AA-06086, Revision D, dated January 25, 2007 or later DAS approved revision.
FAA holder: Bell Helicopter Textron Inc.
SR09395RCAircraft structures
Installation of Supplemental Baggage Compartment Floor in accordance with Aeronautical Accessories, Inc., Drawing List Report No. AA-03047, Revision A, dated September 4, 2003, or later Federal Aviation Administration (FAA) approved revision.
FAA holder: Bell Helicopter Textron Inc.
SH1366SOAircraft structures
Installation of a step-handle on upper fuselage.
FAA holder: Bell Helicopter Textron Inc.