SA403CEOther aircraft modifications
Installation of Wipaire Skis Inc. Model A-2000A (Aircraft Skis) (FluiDyne) (Federal) Main and NA-800 Nose Skis.
FAA holder: F.Atlee Dodge Aircraft Services
Aircraft STC directory
Cessna Aircraft 150G STCs
The Jun 30, 2026 FAA DRS snapshot contains 52 selected supplemental type certificates with status Current whose public applicability data names the Cessna Aircraft 150G. Use it to identify modification scope and recorded holders—not to determine serial-number effectivity, compatibility, installation approval, or commercial availability.
52
listed Current at snapshot
36
holder directories
12
modification categories
Feb 9, 2023
latest recorded revision
Modification demand surface
Other aircraft modifications16
Aircraft structures7
Engine and powerplant7
Electrical systems4
Fuel systems4
Flight controls3
Landing gear and brakes3
Avionics2
Cabin and interiors2
Aircraft connectivity2
Cargo and special mission1
Safety and emergency equipment1
Recorded holders
Del-Air4Curry Aviation LLC2Quantum Swiss LLC2Avidyne Corporation2Bogert Aviation2Steve's Aircraft2Stene Aviation Inc2Hartzell Engine Technologies, LLC2S-TEC Corporation2F.Atlee Dodge Aircraft Services1Athena Aircraft, LLC1Flight Boss Ltd.1Ballistic Recovery Systems Inc.1PECO Inc1Airwolf Filter Corporation1Brittain Industries, Inc1Concorde Battery Corporation1Airglas Inc.1Precise Flight Inc1Southeast Aerospace Inc1
Recently revised 150G STCs
Showing the 52 most recently revised records. Each entry links to the FAA source and separates public approval data from private commercial claims.
View record
SA00709SEFlight controls
Installation of replacement control surface skin panels.
FAA holder: Athena Aircraft, LLC
SA909CEFlight controls
Install STOL kit (wing leading edge cuffs, drooped tips, stall fences and aileron gap seals). (152 LANDPLANE).
FAA holder: Curry Aviation LLC
SA1034SWEngine and powerplant
Installation of Lycoming O-320-E2D engine and Sensenich 74DM or McCauley 1C172TM propeller.
FAA holder: Quantum Swiss LLC
SA1052SWEngine and powerplant
Installation of Lycoming O-320-E2D engine according to STC SA1034SW on floatplane version.
FAA holder: Quantum Swiss LLC
SA64CHCargo and special mission
Install the BRS-150 Parachute Recovery System.
FAA holder: Ballistic Recovery Systems Inc.
SA02013CHOther aircraft modifications
Installation of Avidyne Corporation Traffic Advisory System (TAS).
FAA holder: Avidyne Corporation
SA3687WEOther aircraft modifications
Installation of an air/oil separator.
FAA holder: Airwolf Filter Corporation
SA1433WEOther aircraft modifications
Installation of Brittain Industries Model CSA-1 Stability Augmentation System.
FAA holder: Brittain Industries, Inc
SA01118WIOther aircraft modifications
Installation of the Concorde FLA or VRSLA RG series batteries.
FAA holder: Concorde Battery Corporation
SA01768SEOther aircraft modifications
Installation of an oil cooler system.
FAA holder: Steve's Aircraft
SA02069AKLanding gear and brakes
Fabrication and Installation of the Airglas Inc Landes PA32-206LA Nose Fork equipped with up to a 8.50 x 6 tire.
FAA holder: Airglas Inc.
SA02049SEAircraft structures
Installation of Stene Aviation, Inc. Wing Tips with LED lights.
FAA holder: Stene Aviation Inc
SA10921SCElectrical systems
Installation of an alternator and regulator as a replacement to existing OEM generators and mechanical voltage regulators.
FAA holder: Hartzell Engine Technologies, LLC
SA2162NMOther aircraft modifications
Installation of the Precise Flight stand-by vacuum system (SVS).
FAA holder: Precise Flight Inc
SA3531NMElectrical systems
Installing copper electrical cables. (182 S/N 33000 THRU 33842) (8E 833 and UP).
FAA holder: Bogert Aviation
SA971WEElectrical systems
Installation of a Jasco #6540 (35a.) Alternator Kit or a Jasco #6555 (50a.) Alternator Kit.
FAA holder: Hartzell Engine Technologies, LLC
SA02262SEAircraft structures
Installation of split seam wing strut cuff as replacement parts for the strut fairings.
FAA holder: Stene Aviation Inc
SA03984ATAvionics
Installation of a FreeFlight Systems Universal Access Transceiver - Automatic Dependent Surveillance Broadcast Class B1 System (UAT-ADS-B) Out.
FAA holder: Southeast Aerospace Inc
SA1270GLCabin and interiors
Install SAF-T-STOP auxiliary seat stop device.
FAA holder: Glen A Florence, Aero Technologies, Inc.
SA00281BOAircraft connectivity
Installation of Avidyne Corporation MLX770 MultiLink Broadcast Transceiver P/N 700-00163-( ), Sensor Systems Inc. Antenna P/N S67-1575-109, or equivalent, and optional Avidyne Mounting Tray P/N 700-00165-000.
FAA holder: Avidyne Corporation
SA2048CEOther aircraft modifications
Operation of airplane on unleaded automotive gasoline.
FAA holder: Petersen Aviation Inc
SA02434NYEngine and powerplant
Installation of a Digital Engine Monitoring system.
FAA holder: Ultra Electronics Flightline Systems
SA527CEAircraft structures
Installation of Hoskins Twilighter Mark I High Intensity Light System consisting of a Single Condenser Discharge (Strobe) Model 3 Fuselage Light.
FAA holder: BF Goodrich Aerospace
SA2687WEFuel systems
Installation of protective device on fuel tank vent line.
FAA holder: ROBERTSON FUEL SYSTEMS LLC
SA2219WEEngine and powerplant
Installation of Filtrator Company Engine Crankcase Breather and Vacuum Pump Air-Oil Separator in accordance with the applicable FAA sealed drawing listed on the attached Master Eligibility List Number SA2219WE.Installation of Filtrator Company engine crankcase breather and vacuum pump air-oil separator.
FAA holder: D'Shannon Products Ltd.
SA3851NMAircraft structures
Installation of a BAS tail pull handle in the aft fuselage.
FAA holder: BAS Inc
SA6037SW-DOther aircraft modifications
Installation of S-TEC System 40/50, single and two axis automatic flight guidance system, Model ST-298-40/50.
FAA holder: S-TEC Corporation
SA06037SW-DOther aircraft modifications
Installation of S-TEC System 40/50 Single and Two Axis Automatic Flight Guidance Systems.
FAA holder: S-TEC Corporation
SA917EAAircraft structures
Installation of Grimes aviation white anti-collision strobe light system two light or three light series 555 for wing tips and tail, P/N 30-0555-( ).
FAA holder: Honeywell International Inc.
SA3659SWOther aircraft modifications
Installation of Jetton Alert II alarm system.
FAA holder: Jetton Aircraft
SA1809WEFuel systems
Installation of one twelve-gallon auxiliary fuel tank in each outboard wing panel.
FAA holder: Flint Aero Inc
SA02137ATLanding gear and brakes
Installation of the Lord Corporation Nose Wheel Shimmy Damper P/N SE-1051.
FAA holder: Lord Corporation
SA01487SE (5 OF 5Aircraft connectivity
Installation of a GDL 69 or GDL 69A XM Satellite Receiver in accordance with Garmin Supplemental Type Certificate Master Data List, P/N 005-C0217-00, Revision A, dated December 20, 2004, or later FAA approved revision.
FAA holder: Garmin AT Inc.
SA633GLOther aircraft modifications
Superseded by STC SA01944CH. Modify airplane to fly on unleaded automotive gasoline, 87 minimum antiknock index.
FAA holder: EAA Aviation Foundation
SA02795ATCabin and interiors
Installation of a PXE7300SR, In-Flight Entertainment System.
FAA holder: PS Engineering Incorporated
SA2846SWOther aircraft modifications
Conversion from trigear to conventional gear configuration.
FAA holder: Del-Air
SA3788NMEngine and powerplant
Installation of Sensenich 74DM6S5 Propeller; Elano Exhaust System, P/N EL 099001-063 and -060; and Cessna Muffler, P/N 0454011-1, in accordance with FAA Approved ACT Report No. 104, dated February 10, 1992, or later FAA approved revisions. STC SA4795SW for the installation of Lycoming 0-320-E2D engine is required as part of this installation.
FAA holder: Del-Air
SA4795SWEngine and powerplant
Installation of an Avco Lycoming O-360 or O-320 engine and increase airplane gross weight.
FAA holder: Del-Air
SA1814NMAircraft structures
Installation of Lompoc Aero Specialties inner plexiglass pane in swing out window frames presently employing a single window plexiglass in accordance with Lompoc Aero Specialties FAA sealed Eligibility List dated January 4, 1983, together with their FAA sealed Installation Instructions dated September 20, 1982, or later FAA approved revisions. Manufacturer of the windows is controlled by Lompoc Aero Specialties drawings LAS 1012 dated August 6, 1982, LAS 1013 dated October 5, 1982, and LAS 1014 dated October 6, 1982, or later FAA approved sealed revisions.
FAA holder: G & D Aero Products Inc.
SA2105NMLanding gear and brakes
Modification of the landing gear system form a tricycle to a convetional (tail dragger).
FAA holder: Air Classics, Inc
SA326EAOther aircraft modifications
Wet-to-dry vacuum pump conversion kit 300-3.
FAA holder: Parker Hannifin Corp
SA01065SEOther aircraft modifications
Installation of vortex generators on the wings and vertical tail surfaces of the above model aircraft per Drawing Package MA2081, Revision IR, dated January 15, 2002, and Installation Manual MA2082, Revision IR, dated February 13, 2002, or later FAA approved revision of either of these documents.NOTE: If more than five vortex generators are damaged or missing, the aircraft is not airworthy.
FAA holder: Micro AeroDynamics Inc
SA572CEEngine and powerplant
Installation of Lycoming 150 or 160 hp Model O-320 engine.
FAA holder: Williams Robert or Barbara
SA09491SCSafety and emergency equipment
Installation of a low voltage warning system.
FAA holder: Stark's Aviation
SA71GLOther aircraft modifications
Installation of air filters.
FAA holder: Brackett Aero Filters Inc.