Aircraft STC directory
Cessna Aircraft P172D STCs
The Jun 30, 2026 FAA DRS snapshot contains 27 selected supplemental type certificates with status Current whose public applicability data names the Cessna Aircraft P172D. Use it to identify modification scope and recorded holders—not to determine serial-number effectivity, compatibility, installation approval, or commercial availability.
Modification demand surface
Recorded holders
Recently revised P172D STCs
Showing the 27 most recently revised records. Each entry links to the FAA source and separates public approval data from private commercial claims.
STOL kit installation (wing leading edge cuffs, drooped tips, stall fences, and aileron gap seals). (R172K LANDPLANE AND FLOATPLANE) (172RG LANDPLANE ONLY).
FAA holder: Curry Aviation LLC
Installation of a MT-Propeller model(s) MTV-15-B/[203-210]-58 or MTV-9-B/[198-200]-52 propeller with matching spinner assembly.
FAA holder: McFarlane Aviation LLC
Installation of Cleveland wheel No. 40-97A and brake No. 30-63A.
FAA holder: Kaman Corporation Aircraft Wheel & Brake LLC
Installation of a Three Point Torso Restraint System.
FAA holder: Alpha Aviation Inc
Installation of the True Lock Safety Retention Axle Lock Nut System.
FAA holder: True Lock LLC
Installation of Skymotive jump door model 62-500.
FAA holder: Sheridan Sky Sports
Installation of a Continental O-470 series engine, McCauley propeller, engine mount, cowling, baffles, and associated parts on the Cessna 175 and P172D series aircraft.
FAA holder: Mark Wiebe
Installation of Plane Booster Kit 101-C 1000 in accordance with Upper Valley Drawing 101-24250-6, dated January 10, 1965, and Installation Instructions, Revision 2, dated June 3, 1968.
FAA holder: Cub Crafters Inc
Installation of the Aero Vent Cabin Ventilation System.
FAA holder: Knots 2U Ltd.
Installation of airflow register into baggage compartment cover and insert a screened vent into empennage inspection plate.
FAA holder: Plane Plastics Ltd.
Installation of Lord Corporation nose wheel shimmy damper part number SE-1051-2/3.
FAA holder: Lord Corporation
Replace Cessna Sun Visor assemblies with Aircraft Replacement Fabricated Components tinted Sun Visor Assemblies.
FAA holder: Vantage Plane Plastic Ltd
Installation of an engine electronic tachometer, Model P-1000.
FAA holder: Horizon Instruments Inc
Superseded by STC SA01944CH. Modify airplane to fly on unleaded automotive gasoline, 87 minimum antiknock index.
FAA holder: EAA Aviation Foundation
Installation of Lompoc Aero Specialties inner plexiglass pane in swing out window frames presently employing a single window - in accordance with Lompoc Aero Specialties FAA sealed Eligibility List dated January 4, 1983, together with their FAA sealed Installation Instructions dated September 20, 1982, or later FAA approved revisions. Manufacturer of the windows is controlled by Lompoc Aero Specialties drawings LAS 1012 dated August 6, 1982, LAS 1013 dated October 5, 1982, and LAS 1014 dated October 6, 1982, or later FAA approved sealed revisions.I.
FAA holder: G & D Aero Products Inc.
Wet-to-dry vacuum pump conversion kit 300-2.
FAA holder: Parker Hannifin Corp
Cockpit sunvisor installation.
FAA holder: Rosen Sunvisor Systems LLC
Install a Lycoming O-360 series engine and Hartzell, McCauley, or Sensenich propeller.
FAA holder: Del-Air
Installation of airflow register into baggage compartment cover and insert a screened vent into empennage inspection plate.
FAA holder: Soros, Inc
: Installation of vacuum stall warning system as either the primary or as a secondary stall warning system in accordance with drawings and instructions listed in AML SA00919SE.
FAA holder: Inconceivable Aviation LLC
Installation of vortex generators on wings and tail surfaces.
FAA holder: Micro AeroDynamics Inc
Installation of tail floodlight.
FAA holder: DeVore Aviation Corporation of America, a New Mexico Corporation