FAA-listed STC holder
AeroMech Incorporated STCs
The Jun 30, 2026 FAA DRS snapshot lists 166 selected supplemental type certificates with status Current under AeroMech Incorporated. The records span 223 public aircraft directories and 3 modification categories. This is a research directory, not a claim that any specific kit or service is currently offered.
Modification mix
Aircraft represented
Recently revised records
Showing the 100 most recently revised records. Category directories provide the complete paginated discovery path.
Installation of Starlink Aviation System.
FAA holder: AeroMech Incorporated
Installation of Gogo AVANCE L3 Inflight Connectivity System.
FAA holder: AeroMech Incorporated
Installation of Starlink Aviation System.
FAA holder: AeroMech Incorporated
Installation of Starlink Aviation System.
FAA holder: AeroMech Incorporated
Installation of Starlink Aviation System.
FAA holder: AeroMech Incorporated
Installation of Starlink Aviation System.
FAA holder: AeroMech Incorporated
Installation of Starlink Aviation System.
FAA holder: AeroMech Incorporated
Installation of Starlink Aviation System.
FAA holder: AeroMech Incorporated
Non-Group Reduced Vertical Separation Minimum (RVSM) airworthiness approval.
FAA holder: AeroMech Incorporated
Non-Group Reduced Vertical Separation Minimum (RVSM).
FAA holder: AeroMech Incorporated
Non-Group Reduced Vertical Separation Minimum (RVSM) airworthiness approval.
FAA holder: AeroMech Incorporated
Installation of the Starlink Aviation System.
FAA holder: AeroMech Incorporated
Installation of an Improved Radio Altimeter System.
FAA holder: AeroMech Incorporated
Group Reduced Vertical Separation Minimum (RVSM) airworthiness approval.
FAA holder: AeroMech Incorporated
Group Reduced Vertical Separation Minimum (RVSM).
FAA holder: AeroMech Incorporated
Group Reduced Vertical Separation Minimum (RVSM) airworthiness approval.
FAA holder: AeroMech Incorporated
Non-Group Reduced Vertical Separation Minimum (RVSM) airworthiness approval.
FAA holder: AeroMech Incorporated
Group Reduced Vertical Separation Minimum (RVSM) airworthiness.
FAA holder: AeroMech Incorporated
Non-Group Reduced Vertical Separation Minimum (RVSM) airworthiness approval.
FAA holder: AeroMech Incorporated
Non-Group Reduced Vertical Separation Minimum (RVSM) airworthiness approval.
FAA holder: AeroMech Incorporated
Non-Group Reduced Vertical Separation Minimum (RVSM).
FAA holder: AeroMech Incorporated
Group Reduced Vertical Separation Minimum (RVSM) airworthiness approvaL.
FAA holder: AeroMech Incorporated
Non-Group Reduced Vertical Separation Minimum (RVSM).
FAA holder: AeroMech Incorporated
Group Reduced Vertical Separation Minimum (RVSM).
FAA holder: AeroMech Incorporated
Group Reduced Vertical Separation Minimum (RVSM).
FAA holder: AeroMech Incorporated
Non-group Reduced Vertical Separation Minimum (RVSM) airworthiness approval.
FAA holder: AeroMech Incorporated
Installation of the Garmin G950 Integrated Avionics and Display System.
FAA holder: AeroMech Incorporated
Non-group Reduced Vertical Separation Minimum (RVSM) airworthiness approval.
FAA holder: AeroMech Incorporated
Non-group Reduced Vertical Separation Minimum (RVSM) airworthiness approval.
FAA holder: AeroMech Incorporated
Installation of dual Garmin GTX3000 transponders with ADS-B Out.
FAA holder: AeroMech Incorporated
Installation of Pitot-Static probes with their associated Pitot and static system modifications.
FAA holder: AeroMech Incorporated
Requirements for establishing the group approval basis for Reduced Vertical Separation Minimum (RVSM). Responsible ACO is Los Angeles, NM-L.
FAA holder: AeroMech Incorporated
Installation of a Thrane & Thrane Aero-HSD+ or Aviator 700D satellite communications (SATCOM) systems per Master Data List document AM0255-DL02-00, Revision A, dated February 24, 2012, or later Federal Aviation Administration (FAA) approved revision.
FAA holder: AeroMech Incorporated
Installation of a Compressor Drain Wash in accordance with Master Data List, document AM0249-DL02-00 Revision -, dated November 30, 2011, or later FAA-approved revision.
FAA holder: AeroMech Incorporated
Installation of a Thrane & Thrane Aero-HSD+ satellite communications (SATCOM) system per Master Data List document AM0254-DL02-00, Revision , dated October 13, 2011 or later FAA approved revision.
FAA holder: AeroMech Incorporated
Installation of a Thrane & Thrane AVIATOR 300 (Aero-SB Lite) system with Master Data List document AM0225-DL02, Revision D, dated May 24, 2011, or latest FAA-approved revision.
FAA holder: AeroMech Incorporated
Group aircraft approval for Reduced Vertical Separation Minimum (RVSM) in accordance with the Master Data List, document AM0114-DL02-00, Rev. , dated 29 April 2011 (or later FAA-approved revision).
FAA holder: AeroMech Incorporated
Non-Group aircraft approval for Reduced Vertical Separation Minimum (RVSM) in accordance with the Master Data List, document No. AM0226-DL02-00, Rev. , dated 18 February 2011 (or latest FAA-approved revision). Mystere-Falcon 20-C5, Serial Number 117.
FAA holder: AeroMech Incorporated
Group aircraft approval for Reduced Vertical Separation Minimum (RVSM).
FAA holder: AeroMech Incorporated
Installation of Dual Innovative Solutions & Support Air Data Modules with Master Data List document AM0231-DL02, Revision , dated 01 February 2010 or latest FAA-approved revision.
FAA holder: AeroMech Incorporated
Group aircraft approval for Reduced Vertical Separation Minimum (RVSM) in accordance with AeroMech Document No. AMI-QD-GAC-0331, Rev. D , dated December 04, 2009 (or latest FAA-approved revision).
FAA holder: AeroMech Incorporated
ONE ONLY STC, Serial Number 284: Non-Group (Individual) aircraft approval for Reduced Vertical Separation Minimum (RVSM).
FAA holder: AeroMech Incorporated
ONE-ONLY STC, S/N 004: Non-Group aircraft approval for Reduced Vertical Separation Minimum (RVSM) in accordance with AeroMech Document No. AM0224-QD01, Rev. , dated September 22, 2009 (or latest FAA-approved revision).
FAA holder: AeroMech Incorporated
Group aircraft approval for Reduced Vertical Separation Minimum (RVSM) in accordance with AeroMech Document No. AMI-QD-CS-0307, Rev. F , dated September 9, 2009 or latest FAA-approved revision.
FAA holder: AeroMech Incorporated
Installation of Innovative Solutions and Support (IS&S) Air Data Display Units.
FAA holder: AeroMech Incorporated
Group aircraft approval for Reduced Vertical Separation Minimum (RVSM).
FAA holder: AeroMech Incorporated
Group aircraft approval for Reduced Vertical Separation Minimum (RVSM).
FAA holder: AeroMech Incorporated
Group aircraft approval for Reduced Vertical Separation Minimum (RVSM).
FAA holder: AeroMech Incorporated
Non-group (individual aircraft) approval for Reduced Vertical Separation Minimum (RVSM).
FAA holder: AeroMech Incorporated
ONE ONLY STC, NC-51: Non-group aircraft approval for Reduced Vertical Separation Minimum (RVSM).
FAA holder: AeroMech Incorporated
Non-group aircraft approval for Reduced Vertical Separation Minimum (RVSM).
FAA holder: AeroMech Incorporated
Non-group aircraft approval for Reduced Vertical Separation Minimum (RVSM).
FAA holder: AeroMech Incorporated
Group approval for Reduced Vertical Separation Minimum are contained in AeroMech Document No AMI-QD-JS-0019, dated May 10, 2002, or later FAA-approved revisions.
FAA holder: AeroMech Incorporated
One Only STC; SN 181: Non-Group (Individual) aircraft approval for Reduced Vertical Separation Minimum (RVSM).
FAA holder: AeroMech Incorporated
ONE ONLY STC, S/N 5213: Non-Group approval for Reduced Vertical Separation Minimum are contained in AeroMech Document No AMI-QD-JS-0023, Rev. A, dated February 1, 2008, or later FAA-approved revisions.
FAA holder: AeroMech Incorporated
ONE ONLY STC, S/N 025: Non-group individual aircraft approval for Reduced Vertical Separation Minimum (RVSM.
FAA holder: AeroMech Incorporated
Installation of a Pilots and Co-Pilots Upgraded Altimeter System.
FAA holder: AeroMech Incorporated
ONE ONLY STC. SN 5213: Non-Group approval for Reduced Vertical Separation Minimum are contained in AeroMech Document No AMI-QD-JS-0023, Rev. A, dated February 1, 2008, or later FAA-approved revisions.
FAA holder: AeroMech Incorporated
Group aircraft approval for Reduced Vertical Separation Minimum (RVSM) in accordance with AeroMech Document No. AMI-QD-H700-0010, Rev. New, dated May 19, 2004 (or later FAA-approved revision).
FAA holder: AeroMech Incorporated
One Only STC-Serial Number NC-50: Non-group (individual) aircraft approval for Reduced Vertical Separation Minimum (RVSM).
FAA holder: AeroMech Incorporated
Group approval for Reduced Vertical Separation Minimum (RVSM).
FAA holder: AeroMech Incorporated
Group approval for Reduced Vertical Separation Minimum (RVSM).
FAA holder: AeroMech Incorporated
ONE-ONLY: Non-Group (Individual) aircraft approval for Reduced Vertical Separation Minimum (RVSM), S/N 1006.
FAA holder: AeroMech Incorporated
Installation of a Pilot and Co-Pilot Digital Air Data Display Unit.
FAA holder: AeroMech Incorporated
ONE-ONLY: Non-Group (Individual) aircraft approval for Reduced Vertical Separation Minimum (RVSM).
FAA holder: AeroMech Incorporated
ONE-ONLY: Non-Group (Individual) aircraft approval for Reduced Vertical Separation Minimum (RVSM), S/N 25150.
FAA holder: AeroMech Incorporated
ONE-ONLY: Non-group (individual aircraft) approval for Reduced Vertical Separation Minimum (RVSM), S/N 36-036.
FAA holder: AeroMech Incorporated
ONE-ONLY: Non-group (individual aircraft) approval for Reduced Vertical Separation Minimum (RVSM), S/N 36-008.
FAA holder: AeroMech Incorporated
Installation of Innovative Solutions & Support (IS&S) Integrated Air Data Display Units (IADDU).
FAA holder: AeroMech Incorporated
ONE-ONLY: Non-group approval for Reduced Vertical Separation Minimum, S/N 5150.
FAA holder: AeroMech Incorporated
ONE-ONLY: Non-Group (Individual) aircraft approval for Reduced Vertical Separation Minimum (RVSM), S/N 25032.
FAA holder: AeroMech Incorporated
ONE-ONLY: Non-Group (Individual) aircraft approval for Reduced Vertical Separation Minimum (RVSM), S/N 25101.
FAA holder: AeroMech Incorporated
ONE-ONLY: Non-group (individual aircraft) approval for Reduced Vertical Separation Minimum (RVSM), S/N BAC 120. (BAC 1-11 419/EP).
FAA holder: AeroMech Incorporated
Group aircraft approval for Reduced Vertical Separation Minimum (RVSM).
FAA holder: AeroMech Incorporated
Requirements for establishing the group approval basis for Reduced Vertical Separation Minimum (RVSM).
FAA holder: AeroMech Incorporated
ONE-ONLY: Non-Group aircraft approval for Reduced Vertical Separation Minimum (RVSM), S/N 45811.
FAA holder: AeroMech Incorporated
Non-group aircraft approval for Reduced Vertical Separation Minimum (RVSM).
FAA holder: AeroMech Incorporated
ONE-ONLY: Non-group approval for Reduced Vertical Separation Minimum (RVSM), S/N 089.
FAA holder: AeroMech Incorporated
ONE-ONLY: Non-Group (Individual) aircraft approval for Reduced Vertical Separation Minimum (RVSM), S/N 344.
FAA holder: AeroMech Incorporated
Group aircraft approval for Reduced Vertical Separation Minimum (RVSM) are contained in AeroMech Document No. AMI-QD-LJ-0416 Rev. New, dated April 8, 2005 or latest FAA approved revision.
FAA holder: AeroMech Incorporated
Non-Group (individual) aircraft approval for Reduced Vertical Separation Minimum (RVSM).
FAA holder: AeroMech Incorporated
Non-Group (Individual) aircraft approval for Reduced Vertical Separation Minimum (RVSM).
FAA holder: AeroMech Incorporated
Descriptive data pertaining to this design change are considered inadequate for duplication on other products. This approval is limited to Lockheed Model 1329-23E, Serial Number 5099 only. Non-group approval for Reduced Vertical Separation Minimum.
FAA holder: AeroMech Incorporated
Installation of a Co-Pilot's Digital Air Data Display Unit and relocation of Standby Pneumatic Altimeter. For installation on models 650, Citations III and Citation VI.
FAA holder: AeroMech Incorporated
Installation of a pilot's and co-pilot's digital air data display unit.
FAA holder: AeroMech Incorporated
Non-group (individual aircraft) approval for Reduced Vertical Separation Minimum (RVSM). Descriptive data pertaining to this design change are considered inadequate for duplication on other products. This approval is limited to Learjet Model 35A, Serial Number 183 only.
FAA holder: AeroMech Incorporated
Requirements for establishing group approval basis for Reduced Vertical Separation Minimum (RVSM) are contained in AeroMech Document No. AMI-QD-DC8-0006 dtd 9/15/00 or later approved FAA revisions.
FAA holder: AeroMech Incorporated
Non-group aircraft approval for Reduced Vertical Separation Minimum (RVSM). Limited to installation on Cessna 501, serial number 501-0116 ONLY.
FAA holder: AeroMech Incorporated
Descriptive data pertaining to this design change are considered inadequate for duplication on other products. This approval is limited to the Hawker Siddeley Model HS.125-600A, Serial Number 256029 only. Non-Group (Individual) aircraft approval for Reduced Vertical Separation Minimum (RVSM).
FAA holder: AeroMech Incorporated
Non-Group (Individual) aircraft approval for Reduced Vertical Separation Minimum (RVSM).
FAA holder: AeroMech Incorporated
Group aircraft approval for Reduced Vertical Separation Minimum (RVSM).
FAA holder: AeroMech Incorporated
Descriptive data pertaining to this design change are considered inadequate for duplication on other products. This approval is limited to Gulfstream Model G-1159B, serial number 255 only. Non-group approval for Reduced Vertical Separation Minimum (RVSM).
FAA holder: AeroMech Incorporated
Group aircraft approval for Reduced Vertical Separation Minimum (RVSM).
FAA holder: AeroMech Incorporated
Group aircraft approval for Reduced Vertical Separation Minimum (RVSM) in accordance with AeroMech Document No. AMI-QD-C650-0415 Rev. New, dated December 3, 2004 or latest FAA approved revision.
FAA holder: AeroMech Incorporated
Group approval for Reduced Vertical Separation Minimum (RVSM).
FAA holder: AeroMech Incorporated
Descriptive data pertaining to this design change are considered inadequate for duplication on other products. This approval is limited to Sabreliner Corporation Model NA-265-60, Serial Number 306-98 only.
FAA holder: AeroMech Incorporated
Descriptive data pertaining to this design change are considered inadequate for duplication on other products. This approval is limited to the McDonnell Douglas Model DC-9-15 Serial Number 47152 only. Non-group (individual) aircraft approval for Reduced Vertical Separation Minimum (RVSM).
FAA holder: AeroMech Incorporated
Descriptive data pertaining to this design change are considered inadequate for duplication on other products. This approval is limited to the McDonnell Douglas Model DC-9-15 Serial Number 45826 only. Non-group (individual) aircraft approval for Reduced Vertical Separation Minimum (RVSM).
FAA holder: AeroMech Incorporated
Descriptive data pertaining to this design change are considered inadequate for duplication on other products. This approval is limited to Dassault Mystere Falcon 20-F5, Serial Number 430 only. Non-Group (Individual) aircraft approval for Reduced Vertical Separation Minimum (RVSM).
FAA holder: AeroMech Incorporated