Aircraft STC directory
Cessna Aircraft 172Q STCs
The Jun 30, 2026 FAA DRS snapshot contains 92 selected supplemental type certificates with status Current whose public applicability data names the Cessna Aircraft 172Q. Use it to identify modification scope and recorded holders—not to determine serial-number effectivity, compatibility, installation approval, or commercial availability.
Modification demand surface
Recorded holders
Recently revised 172Q STCs
Showing the 92 most recently revised records. Each entry links to the FAA source and separates public approval data from private commercial claims.
Installation of alternate avionics support assembly.
FAA holder: Radiorax Aviation Systems LLC
Installation of John Deere AGRI Services, Inc. JD3 Aerial Imaging System,.
FAA holder: Aeroptic LLC
Installation of replacement flap trailing edge bulbs with AOG Drawing.
FAA holder: Athena Aircraft, LLC
Installation of replacement control surface skin panels.
FAA holder: Athena Aircraft, LLC
Installation of wing leading edge cuffs, drooped tips, stall fences and Aileron gap seals. (172, 172Q LANDPLANE) (172P LANDPLANE AND FLOATPLANE).
FAA holder: Curry Aviation LLC
Installation of FlightLogic Synthetic Vision Electronic Flight Information System (EFIS-SV).
FAA holder: Genesys Aerosystems Inc.
Installation of Baumann Model BF-2550 floats.
FAA holder: Baumann Floats LLC
Installation of Baumann Model BF2550A floats. For models 172I through 172P, a gross weight of 2350 lbs. at a center of gravity range of plus 39.5 inches to plus 45.5 inches is approved. For models R172K and R172K with STCs SA1436CE and SA1437CE, the maximum gross weight is limited to 2550 lbs. at a center og gravity range of plus 39.5 inches to plus 45.5 inches.
FAA holder: Baumann Floats LLC
Installation of Flight Boss LTD S-RPE-CN Rudder Pedal Extensions.
FAA holder: Flight Boss Ltd.
Install BRS-172 parachute recovery system.
FAA holder: Ballistic Recovery Systems Inc.
Installation of Airwolf remote mounted engine oil filter model AFC-500 or AFC-600 on multi engine fixed wing light aircraft incorporating Franklin reciprocating engines of 450 horsepower or less.
FAA holder: Airwolf Filter Corporation
Installation of a cooling shroud on engine driven dry air pumps.
FAA holder: McFarlane Aviation Inc
Installation of an 18 gallon fuel tank in the aft baggage compartment and fuel transfer system.
FAA holder: Griggs Aircraft Refinishing LLC
Installation of the True Lock Safety Retention Axle Lock Nut System.
FAA holder: True Lock LLC
Installation of the Concorde FLA or VRSLA RG series batteries.
FAA holder: Concorde Battery Corporation
Incorporation of bushing on carburetor hot air box control arm.
FAA holder: Dynamic Propeller
Fabrication and Installation of the Airglas Inc Landes PA32-206LA Nose Fork equipped with up to a 8.50 x 6 tire.
FAA holder: Airglas Inc.
Installation of the Precise Flight stand-by vacuum system (SVS).
FAA holder: Precise Flight Inc
Installation of a Jasco #6540 (35a.) Alternator Kit or a Jasco #6555 (50a.) Alternator Kit.
FAA holder: Hartzell Engine Technologies, LLC
Installation of Sensor Pod and wiring for a passenger operated monitoring system.
FAA holder: Sky IMD Inc
Installation of Brittain Model CSA-1 Stability Augmentation System.
FAA holder: Brittain Industries, Inc
Installation of Brittain Industries Model B2C Autopilot System.
FAA holder: Brittain Industries, Inc
Installation of a silicone rubber wingtip device intended as a provision for mounting battery powered devices such as strobes or air temperature sensor.
FAA holder: CarpenterDev, LLC
Installation of GX50/60 GPS Navigator, Capstone configured MX20 Multi-Function Display and UAT transceiver.
FAA holder: Garmin International Inc
Installation of split seam wing strut cuff as replacement parts for the strut fairings.
FAA holder: Stene Aviation Inc
Installation of Inline Air Filter Kit, P/N CV1J4-C.
FAA holder: Aerotech Components Inc
Installation of a FreeFlight Systems Universal Access Transceiver - Automatic Dependent Surveillance Broadcast Class B1 System (UAT-ADS-B) Out.
FAA holder: Southeast Aerospace Inc
Installation of BAS, Inc. TSO Shoulder Harness and BAS Inc. Harness System.
FAA holder: BAS Inc
Install SAF-T-STOP auxiliary seat stop device.
FAA holder: Glen A Florence, Aero Technologies, Inc.
Installation of Becker Avionics SAR DF-517 Search and Rescue Direction Finding System.
FAA holder: Rhotheta USA Inc.
Installation of a Digital Engine Monitoring system.
FAA holder: Ultra Electronics Flightline Systems
Installation of Doyn fiberglass wheel fairings.
FAA holder: D'Shannon Products Ltd.
Installation of Doyn Kit No. 1400 Swept-Tail Assembly per Doyn Drawing No. 1400, Revision B, dated August 18, 1961.
FAA holder: D'Shannon Products Ltd.
Installation of BAS, Inc. tail pull handle in the aft fuselage.
FAA holder: BAS Inc
Installation of an engine electronic digital tachometer, Model P-1000.
FAA holder: Horizon Instruments Inc
Installation of the VNS 1000 Voice Navigation System.
FAA holder: VNS Incorporated
Installation of FlightLogic Synthetic Vision Electronic Flight Information System (EFIS-SV).
FAA holder: Chelton Flight Systems Inc.
Fabrication and installation of F. Atlee dodge Aircraft Services, Cessna Tie-Down clamp.
FAA holder: F. Atlee Dodge Aircraft Services, LLC
Installation of North American Surveillance Systems Strut Mount and Optional Cloud Cap Technologies TASE / TASE Dou Gimbals.
FAA holder: North American Surveillance Systems LLC
Installation of the High Intensity Discharge Light Assembly Kit.
FAA holder: Knots 2U Ltd.
Installation of Glareshield per FAA Approved Ashby Glareshield Master Drawing List.
FAA holder: Aircraft Spruce and Specialty Co.
Installation of EDO 89-2000 floats modified.
FAA holder: X-Winds S.T.O.L. Inc.
Installation of Knots 2U, Ltd Wheel and Body Fairings.
FAA holder: Knots 2U Ltd.
Installation of the Aero Vent Cabin Ventilation System.
FAA holder: Knots 2U Ltd.
Installation of external aerodynamic Vortelator Kit on airplanes.
FAA holder: Aircraft Development Co
Installation of Cleveland Main Wheels and Brakes.
FAA holder: F Atlee Dodge Aircraft Service
Installation of airflow register into baggage compartment cover and insert a screened vent into empennage inspection plate.
FAA holder: Plane Plastics Ltd.
Installation of Bendix/King KMD 550/850 Multi-Function Display System with Optional Traffic, Terrain and Weather Sensors. This STC also is approved for some single-engine aircraft. See SA01105WI-D (2 of 2).
FAA holder: Honeywell International Inc.
Installation of the Courtesy Light Kit.
FAA holder: Knots 2U Ltd.
Installation of electrically driven vacuum pump.
FAA holder: Aero Safe Corporation
Installation of NPX138N-XXX FM Transceiver.
FAA holder: Northern Airborne Technology Ltd
Installation of VENTUBE pilot/co-pilot overhead fresh air valves. (195 SERIES LC-126A; LC-126B; LC-126C).
FAA holder: Soros Inc. a Texas Corporation
Installation of one 12-gallon auxiliary fuel tank in each outboard wing panel.
FAA holder: Flint Aero Inc
Installation of FMK Light Emitting Diode (LED) Instrument Panel Lights.
FAA holder: Forest Kirst
Installation of Lord Corporation nose wheel shimmy damper part number SE-1051-2/3.
FAA holder: Lord Corporation
Installation of Graphic Engine Monitors (GEM) Models GEM-610 and GEMINI 1200.
FAA holder: Insight Instrument Corporation
Replace Cessna Sun visor assemblies with Aircraft Recycled Flying controls tinted Sun Visor Assemblies.
FAA holder: Plane Plastic Ltd
Installation of Technisonic Industries Limited TFM-138, A, and B (does not include TFM-138, s/n 1540 and up, TFM-138B, s/n 1500 and up).
FAA holder: Technisonic Industries Limited
Installation of Electronics International model UBG-16 or UBG-16T bar graph engine analyzer.
FAA holder: Electronics International
Installation of flap gap seal per Aircraft Development Co. Drawing List 114-1 stamped FAA approved with a date of April 27, 2005 or later. Conformity data for Drawing List 114-1 is derived from Drawing List 114-1 Revision C and STC s SA1484CE, SA1490CE, SA1491CE, SA1492CE, SA1493CE, SA1494CE, and SA1495CE.
FAA holder: Aircraft Development Co
Installation of aileron gap seal per Aircraft Development Co. Drawing List 115-1 stamped FAA approved with a date of April 27, 2005 or later. Conformity data for Drawing List 115-1 is derived from Drawing List 115-1 Revision D and STC s SA1484CE, SA1490CE, SA1491CE, SA1492CE, SA1493CE, SA1494CE, and SA1495CE.
FAA holder: Aircraft Development Co
Modification of right hand side door to provide an openable window.
FAA holder: Ellis & Associates CADD/Technical Illustrations
Installation of Wulfsberg P-2000 and/or C-2000-RT-2000 transceiver system.
FAA holder: Wulfsberg Electronics Division
Installation of decorative fiberglass fairing in accordance with Texas Skyways, Inc. Master Drawing No. TSFG-100-1, dated November 18, 2004, or later FAA approved revisions.
FAA holder: Texas Skyways Inc
Installation of Garmin AT Model GDL90 UAT Data Link System, in accordance with Garmin AT, Inc., GDL 90 UAT Master Data List, P/N 560-0278-01, Revision A, dated November 12, 2004, or later FAA approved revision.
FAA holder: Garmin AT Inc.
Installation of canvas hammock seat.
FAA holder: Stoots Aviation/David A. Stoots
Installation of Aero Advantage ADV200 series vacuum pump per Aero Advantage Drawing Number ADVMSI 500 latest FAA approved revision.
FAA holder: Aero Holdings Ltd. a Texas limited partnership
Installation of CO Guardian Remote Carbon Monoxide Detector Instrument.
FAA holder: CO Guardian LLC
Installation of J.P. Instruments (JPI) Primary Temperature Indicating System in accordance with JPI Installation Manual for the EDM 711, Report 106P, Revision B, dated August 2, 2001, or later FAA approved revision.
FAA holder: J P Instruments
Modification of the Union Aviation Supplemental Type Certificate No. SA860SO for portable rudder/brake hand control by adapting the control to 'Nyla fill' rudder pedals.
FAA holder: Flock Dave
Installation of the following Aerospace Logic aircraft instruments: EGT-100 Exhaust Gas Temperature Indicator, CHT-100 Cylnder Head Temperature INdicator, FL-100 Dual Fuel Level Indicator, FP-100 Fuel Pressure and Ammeter Indicator, OL-100 Oil Pressure and Temperature Indicator, and VA-100 Voltmeter and Ammeter Indicator.
FAA holder: Aerospace Logic Inc.
Cockpit sunvisor installation.
FAA holder: Rosen Sunvisor Systems LLC
Installation of CO Guardian Carbon Monoxide Detector Instrument.
FAA holder: CO Guardian LLC
Installation of Fibre Glass Reinforced Plastic Nacelle Fairing, Trade Name 'Exhaust Fairing".
FAA holder: Maple Leaf Aviation Ltd
Installation of airflow register into baggage compartment cover and insert a screened vent into empennage inspection plate.
FAA holder: Soros, Inc
Installation of control wheel. Includes provisions only for a push-to-talk (PTT) switch. Separate FAA approval of PTT switch is required.
FAA holder: Trevor Burward-Hoy
Installation of Technisonic Industries Ltd OSAT-100 Airborne Position/Data Communicator.
FAA holder: Technisonic Industries Limited
Replacement of right front seat with stretcher.
FAA holder: Aviation Fabricators Inc
Installation of Accessory Power Receptable in accordance with FAA Approved Master Drawing List, Document No. 172-APR-100, Rev IR, dtd 8/15/00 or later FAA approved revision.
FAA holder: Premier Aviation
Installation of 55 two-axis automatic flight guidance system, Model ST-563, with optional automatic electric trim system.
FAA holder: S-TEC Corporation
Installation of vortex generators on wings and tail surfaces.
FAA holder: Micro AeroDynamics Inc
Installation of fiberglass replacement wing tips.
FAA holder: Aircraft Development Co
Installation of S-TEC System 40X/50X Single and Two-Axis Automatic Flight Guidance Systems, Model ST-868-40X/50X.
FAA holder: S-TEC Corporation