SA2558CEElectrical systems
Replace the lead acid battery with a Concorde RG 24-11M lead acid battery.
FAA holder: Aero-Mach Wilco LLC
Aircraft STC directory
Cessna Aircraft P210N STCs
The Jun 30, 2026 FAA DRS snapshot contains 49 selected supplemental type certificates with status Current whose public applicability data names the Cessna Aircraft P210N. Use it to identify modification scope and recorded holders—not to determine serial-number effectivity, compatibility, installation approval, or commercial availability.
49
listed Current at snapshot
29
holder directories
10
modification categories
Sep 20, 2022
latest recorded revision
Modification demand surface
Other aircraft modifications19
Engine and powerplant7
Fuel systems7
Avionics5
Flight controls4
Landing gear and brakes2
Cabin and interiors2
Electrical systems1
Aircraft structures1
Propellers1
Recorded holders
Brittain Industries, Inc7Javelin Conversions Inc.5Griggs Aircraft Refinishing LLC3Aero-Mach Wilco LLC2RAM Aircraft Limited Partnership2Flint Aero Inc2Kaman Corporation Aircraft Wheel and Brake LLC1Flight Boss Ltd.1Air Comm Corporation1McFarlane Aviation Inc1CAV Ice Protection Inc1Horsham Aviation Services1Glen A Florence, Aero Technologies, Inc.1Teledyne Controls1BAS Inc1Aero Safe Corporation1Shadin Avionics1Air Plains Services Corporation1SMR Technologies Inc1Chelton Aviation Corporation1
Recently revised P210N STCs
Showing the 49 most recently revised records. Each entry links to the FAA source and separates public approval data from private commercial claims.
View record
SA2749CELanding gear and brakes
Installation of wing mounted convex mirror, for inspection of nose and main landing gear position.
FAA holder: Aero-Mach Wilco LLC
SA52GLLanding gear and brakes
On all models listed above, except P210N, install Cleveland Wheel & Brake Conversion Kit P/N 199-60.
FAA holder: KAMAN Corporation Aircraft Wheel and Brake LLC
SA02415CHFlight controls
Installation of Flight Boss LTD S-RPE-CN Rudder Pedal Extensions.
FAA holder: Flight Boss Ltd.
SA71RMOther aircraft modifications
Installation of air conditioning system.
FAA holder: Air Comm Corporation
SA785GLEngine and powerplant
Installation of a cooling shroud on engine driven dry air pumps.
FAA holder: McFarlane Aviation Inc
SA01447LAAircraft structures
Installation of Pilot Door Window Lock, Pilot Door and Baggage Door Locks.
FAA holder: CWL Aero, LLC
SA00606NYFuel systems
Installation of O & N Aircraft Modifications low fuel warning device.
FAA holder: Griggs Aircraft Refinishing LLC
SA1003NEEngine and powerplant
Configuration 1: Installation of an Allison 250-B17F Turboprop Engine (450Hp), (TCDS. E10CE) Hartzell HC-B3TF-7A/ T9212NK-2, Constant Speed reversing propeller, and, a 27.7 gallon Auxiliary Fuel Tank in the fuselage aft, baggage compartment. Configuration 2: Installation of a Rolls Royce Corporation, 250-B17F/2 engine (450Hp), (TCDS. E10CE). and Hartzell HCB3TF- 7A/T9212NK-2, Constant Speed reversing propeller.
FAA holder: Griggs Aircraft Refinishing LLC
SA3753NMFlight controls
Installation of stiffening ribs in the aileron and rudder surfaces and redistribution of the mass balance in the aileron, rudder and elevator surfaces.
FAA holder: Griggs Aircraft Refinishing LLC
SA02918CHEngine and powerplant
Replace original Teledyne Continental Motors (TCM) TSIO-520 engine with TCM IO-550-P model aircraft engine; turbo normalized not to exceed the rating of 310 BHP Maximum Continuous Power for both the aircraft and engine.
FAA holder: Vitatoe Aviation
SA00172WIOther aircraft modifications
Installation of TKS anti-icing system components, with placard stating 'Flight into known icing conditions is prohibited.'.
FAA holder: CAV Ice Protection Inc
SA01744WIFuel systems
Installation of an Induction Manifold Fuel Drain Line Filter.
FAA holder: Horsham Aviation Services
SA1305WEOther aircraft modifications
Installation of Brittain Model PCA-1 Pitch Assist with Altitude Hold.
FAA holder: Brittain Industries, Inc
SA469WEOther aircraft modifications
Installation of Brittain Model PC-1 Pitch Assist and Model AH-1 Altitude Hold (optional).
FAA holder: Brittain Industries, Inc
SA1343WEFlight controls
Installation of Brittain Industries Model B-4 Flight Control System.
FAA holder: Brittain Industries, Inc
SA618WEAvionics
Installation of Brittain Industries, Inc. Model B-4 Flight Control System, including PC-1 Pitch Assist, AH-1 Altitude Hold and NAV-1 Navigation Coupler.
FAA holder: Brittain Industries, Inc
SA627WEAvionics
Installation of Brittain Industries, Inc. Model B-4 Flight Control System, including PC-1 Pitch Assist, AH-1 Altitude Hold and NAV-1 Navigation Coupler.
FAA holder: Brittain Industries, Inc
SA674WEAvionics
Installation of Brittain Model B-4 Flight Control System including PC-1 Pitch Assist, AH-1 Altitude Hold and NAV-1 Navigation Coupler.
FAA holder: Brittain Industries, Inc
SA2568NMEngine and powerplant
Installation of an Avco Lycoming TI0-540-V2AD engine Hartzell HC-F4YR-IRF/7663DB-6Q four bladed propeller and associated changes.
FAA holder: Javelin Conversions Inc.
SA2570NMFlight controls
Installation of stiffening ribs in the aileron and rudder surfaces and redistribution of the mass balance in the aileron, rudder and elevator.
FAA holder: Javelin Conversions Inc.
SA341NEFuel systems
Installation of an Aft Baggage Compartment Auxiliary Fuel Tank and Transfer System to the Right Wing Tank.
FAA holder: Javelin Conversions Inc.
SA404NEOther aircraft modifications
Installation of a Garrett Pressurization Control System.
FAA holder: Javelin Conversions Inc.
SA441NEOther aircraft modifications
Installation of vapor-cycle air conditioning system.
FAA holder: Javelin Conversions Inc.
SA1230GLCabin and interiors
Install SAF-T-STOP auxiliary seat stop device.
FAA holder: Glen A Florence, Aero Technologies, Inc.
SA2274CEOther aircraft modifications
Installation of B&D Instruments, Inc. Electronic Tachometer System. Data required: (1) B&D Instruments, Inc. Drawing List No. 0530-010-001, Rev. H, dated August 20, 1987, or B&D Instruments, Inc. Installation Manual Part No. 0530-010-011, Rev. A, or later FAA Approved revision; and (2) copy of this certificate.
FAA holder: Teledyne Controls
SA00855SEOther aircraft modifications
Installation of BAS, Inc. duel belt shoulder harness with inertia reel in accordance with BAS Report 1002, dated April 1, 2000, or later FAA approved revision.
FAA holder: BAS Inc
SA00272WIOther aircraft modifications
Replacement of hydraulic system pressure switch.
FAA holder: APPH Wichita Inc.
SA4626SWOther aircraft modifications
Electrically driven vacuum pump as a standby auxiliary pump to existing pump.
FAA holder: Aero Safe Corporation
SA639GLFuel systems
Installation of a Shadin Company Fuel Flow Indicating System.
FAA holder: Shadin Avionics
SA00426WIPropellers
Installation of McCauley Propeller Model D3A34C402/90DFA -8, -10 and associated changes.
FAA holder: Air Plains Services Corporation
SA02007NYOther aircraft modifications
Installation of SMR Technologies pneumatic deicer models.
FAA holder: SMR Technologies Inc
SA10285SCAvionics
Installation of a Chelton Aviation Corp (CAC) AP-3C autopilot.
FAA holder: Chelton Aviation Corporation
SA2456CEFuel systems
Installation of fuel inlets and and caps. (210R S/N 21058819 THRU 21064950) (P210R S/N P21000001 THRU P21000867) (T210R S/N T210-0198 THRU 21064950).
FAA holder: Hartwig Aircraft Fuel Cell Repair
SA2602NMOther aircraft modifications
Installation of Precise Flight, Inc. 100 Series Speedbrake System in accordance with Precise Flight, Inc. Speedbrake Installation Drawing No. 210S006A, dated October 17, 1988, and Drawing List No. 210S008A, dated October 20, 1988, or later FAA approved revisions. Or Installation of Precise Flight, Inc. Speedbrake 2000 System in accordance with Precise.
FAA holder: Precise Flight Inc
SA3696NMOther aircraft modifications
Cockpit Sun Visor installation in accordance with FAA approved Rosen Drawing List Number RCS-00DL, dated December 17, 1986, or later FAA approved revisions.
FAA holder: Rosen Sunvisor Systems LLC
SA01780CHOther aircraft modifications
Replacement of certain BFGoodrich pneumatic deicer boots per SMR Technologies, Inc. Installation Instructions as listed on AML No. SA01780CH latest FAA approved revision.
FAA holder: SMR Technologies
SA5821NMEngine and powerplant
Installation of an electronic digital engine tachmoter, Model P-1000.
FAA holder: Horizon Instruments Inc
SA3728SWOther aircraft modifications
Install vacuum pump cooling shroud.
FAA holder: RAM Aircraft Limited Partnership
SA4578SWEngine and powerplant
Installation of an auxiliary engine driven vacuum pump system.
FAA holder: RAM Aircraft Limited Partnership
SA00941SEOther aircraft modifications
Installation of vortex generators on wings and tail surfaces in accordance with Drawing Package MA2156, Revision IR, dated April 18, 2001, and Installation Manual MA2157, Revision IR, dated July 3, 2001, or later FAA approved revision to either of these documents. If more than five vortex generators are damaged or missing, the aircraft is not airworthy.
FAA holder: Micro AeroDynamics Inc
SA00426DECabin and interiors
Installation of Model FB-01 "Swing Arm" Pilot Arm Rest System on R/H side of pilot seat.
FAA holder: Quality Aircraft Components LC
SA8405SW-DOther aircraft modifications
Installation of S-TEC System 55/55X two axis automatic flight guidance system, Model ST-553.
FAA holder: S-TEC Corporation
SA3312WEOther aircraft modifications
Installation of recognition lights on horizontal stabilizer.
FAA holder: DeVore Aviation Corporation of America, a New Mexico Corporation
SA2590NMEngine and powerplant
Installation of Pratt & Whitney PT6A-34, PT6A-135, or PT6A-135A engine and other necessary modifications.
FAA holder: Basler Turbo Conversions
SA3226NMFuel systems
Installation of 16.25 gallon usable fuel-containing lightning resistant wing tips.
FAA holder: Flint Aero Inc
SA4300WEFuel systems
Installation of a 16.25 gallon usable fuel-containing wing tips.
FAA holder: Flint Aero Inc
SA00368DEOther aircraft modifications
Installation of an Aircraft Noise Control System.
FAA holder: Quiet Flight LLC