SA01147WIOther aircraft modifications
Installation of Concorde FLA or VRSLA series batteries in Piper Light Airplanes.
FAA holder: Concorde Battery Corporation
Aircraft STC directory
Piper Aircraft PA-22-150 STCs
The Jun 30, 2026 FAA DRS snapshot contains 52 selected supplemental type certificates with status Current whose public applicability data names the Piper Aircraft PA-22-150. Use it to identify modification scope and recorded holders—not to determine serial-number effectivity, compatibility, installation approval, or commercial availability.
52
listed Current at snapshot
27
holder directories
8
modification categories
Jun 15, 2026
latest recorded revision
Modification demand surface
Other aircraft modifications20
Engine and powerplant7
Flight controls7
Landing gear and brakes6
Fuel systems5
Propellers4
Electrical systems2
Aircraft structures1
Recorded holders
Svenn s Aviation LLC9Rubbert Aircraft Services4Peter C. Morrison3Trimmer Marvin E/Trimmer Aviation LLC3Brittain Industries, Inc3Dakota Cub Aircraft, Inc.2CiES Inc.2Steve's Aircraft2Morfitt Jeffrey A.2Concorde Battery Corporation1B & C Specialty Products Inc.1Airframes Alaska LLC1Honeywell International Inc (Bendix King)1Avidyne Corporation1Steve Pierce1F. Atlee Dodge Aircraft Services, LLC1Silveraire LLC1KNR-Inc1Garmin International Inc1Univair Aircraft Corporation1
Recently revised PA-22-150 STCs
Showing the 52 most recently revised records. Each entry links to the FAA source and separates public approval data from private commercial claims.
View record
SA12025ATOther aircraft modifications
This STC allows the exchange of the valid Standard Airworthiness Certificate issued to aircraft serial number 22-2838, a Piper PA-22-150 aircraft registered as N2463P, which meets the requirements of 14 CFR Part 21.24(a)(1) for a Special Airworthiness - Primary Category Airworthiness Certificate, under the existing provisions of 14 CFR Part 21.184(c).
FAA holder: Christopher Allen Cox
SA11854CHEngine and powerplant
Installation of modified exhaust system in lieu of original components.
FAA holder: Dakota Cub Aircraft Inc.
SA01343WIElectrical systems
Installation of B&C Specialty Products BC400 alternator.
FAA holder: B & C Specialty Products Inc.
SA02511SE (2 OF 2)Fuel systems
Installation of replacement fuel quantity indicator sending unit(s).
FAA holder: CiES Inc.
SA02511SE (2 OF 3)Fuel systems
Installation of replacement fuel quantity indicator sending unit(s).
FAA holder: CiES Inc.
SA09150SCLanding gear and brakes
Replacement of Piper wheel assembly p/n 451-750 and brake assembly p/n 451-708 with Cleveland wheel assembly pn 40-86 and brake assembly pn 30-55.
FAA holder: Peter C. Morrison
SA8334SWFlight controls
Installation of dual toe brakes including rudder pedals, linkages and torque tubes.
FAA holder: Peter C. Morrison
SA8438SWFlight controls
Installation of dual toe brakes including rudder pedals, linkages and torque tubes.
FAA holder: Peter C. Morrison
SA02233AKFuel systems
Installation of high visibility fuel sight gauge.
FAA holder: Dakota Cub Aircraft Inc.
SA02534AKOther aircraft modifications
Installation of Airframes Alaska Aluminum Lift Struts.
FAA holder: Airframes Alaska LLC
SA11174SC PAGE 2Other aircraft modifications
Installation of BendixKing by Honeywell KSN 770 and KSN 765 WAAS LPV approach capable nav/comm systems.
FAA holder: Honeywell International Inc (Bendix King)
SA00401BO (PAGE 2)Other aircraft modifications
Installation of a SkyTrax100B UAT receiver.
FAA holder: Avidyne Corporation
SA04474CHEngine and powerplant
Installation of Rubbert Exhaust Assembly RR-1210, RR-1210-HR, RR-1212 and RR-1212-HR on Piper Aircraft models PA-12, PA- 14, PA-16, PA-18, PA-19, PA-20 and PA-22, in accordance with Installation Instructions, document number RR-120, revision Org., dated 04/24/2020 and Instruct 1201, revision Org., dated July 27, 2020 or later FAA approved revision.
FAA holder: Rubbert Aircraft Services
SA01863SEOther aircraft modifications
Installation of Niagara Oil Cooler in the above model aircraft.
FAA holder: Steve Pierce
SA02846CHPropellers
Installation of MT Propeller model MTV-15-B/210-58 on Piper Aircraft models PA-20 and PA-22,.
FAA holder: Svenn's Aviation LLC
SA819SWLanding gear and brakes
Installation of extended wings and fuselage, drooped wing tips (optional), and modified landing gear or Edo 89-2000 seaplane floats.
FAA holder: James August Smith
SA04121CHEngine and powerplant
Installation of Lycoming 0-320 engine.
FAA holder: Svenn s Aviation LLC
SA3606NMLanding gear and brakes
Installation of landing gear fueling step.
FAA holder: F. Atlee Dodge Aircraft Services, LLC
SA02483AKLanding gear and brakes
Installation of : (1) Cleveland 199-62 or 199-62A wheel and brake kit or ABI LLC AB-199-62 or ABI-199-62A wheel and brake kit on aircraft with 1.5" axles, OR (2) Cleveland wheel and brake kit 199-71 or ABI LLC ABI-199-71 kit on aircraft with 1.25" axles.
FAA holder: Trimmer Marvin E/Trimmer Aviation LLC
SA4-423Flight controls
Installed Brittain Industries, Inc., B2D Flight Control System.
FAA holder: Brittain Industries, Inc
SA02934CHLanding gear and brakes
Installation of the Custom Fiberglass Molding, Inc. (CFMI) Model Alaskan 2500 Main Landing Gear Skis.
FAA holder: Silveraire LLC
SA02734CHElectrical systems
Installation of Lightweight Battery and Circuit Breaker Master Switch in lieu of original components.
FAA holder: Svenn s Aviation LLC
SA02898CHEngine and powerplant
Installation of new engine baffling and rear mounted engine oil cooler.
FAA holder: Rubbert Aircraft Services
SA02899CHOther aircraft modifications
Installation of new lower cowling and carburetor air box.
FAA holder: Rubbert Aircraft Services
SA02929CHEngine and powerplant
Installation of Lycoming O-360 engine.
FAA holder: Rubbert Aircraft Services
SA02121SE (PAGE 2)Other aircraft modifications
Installation of Garmin GTS 825 (TAS) or GTS 855 (TCAS I) Traffic System.
FAA holder: Garmin International Inc
SA02128LAFlight controls
Installation of aileron and flap hinge repair bushings.
FAA holder: Univair Aircraft Corporation
SA278WEFlight controls
Installation of Brittain Model B2D Flight Control System.
FAA holder: Brittain Industries, Inc
SA1487WEFlight controls
Installation of Brittain Industries, Inc. Model B2C Flight Control System.
FAA holder: Brittain Industries, Inc
SA02751CHPropellers
Installation of McCauley Propeller model 1A200FA824X.
FAA holder: Svenn s Aviation LLC
SA536ALFuel systems
Fabrication and installation of Stoddard Aero Service wing auxiliary fuel tanks per Stoddard Aero Service Drawing List No. 12, dated February 7, 1975, or later Federal Aviation Administration approved revision. Stoddard Aero Service Airplane Flight Manual Supplement, dated January 29, 1969, is required with this installation.
FAA holder: Cub Crafters Inc
SA02858CHOther aircraft modifications
Installation of Piper Part Number 21242 and F. Atlee Dodge P/N 3143-12 float fittings in lieu of original components.
FAA holder: Svenn s Aviation LLC
SA02567CHOther aircraft modifications
Installation of Piper Part Number 12769 Stabilizer and Piper Part Number 12770 Elevators in lieu of original components.
FAA holder: Svenn s Aviation LLC
SA02790CHOther aircraft modifications
Installation of modified wingtips.
FAA holder: Svenn s Aviation LLC
SA557ALAircraft structures
Installation of left hand front door.
FAA holder: Aircraft Innovations, LLC
SA02672CHOther aircraft modifications
Installation of 8:50 tires and tubes in lieu of original components in accordance with installation instructions listed on AML No. SA02672CH.
FAA holder: Svenn s Aviation LLC
SA02345AKOther aircraft modifications
Installation of Piper PA-18 three-inch extended gear & Maule Oleo Strut.
FAA holder: TrimmerAviation LLC
SA02670CHPropellers
Installation of McCauley Propeller model 1A175GM824X.
FAA holder: Svenn s Aviation LLC
SA02306AKEngine and powerplant
Installation of a Lycoming O-360-A1A, A1D, A2A, A2D, A2E, A2F, A3A, A3D, A4A, A4M, A4N, or A4P engine on Piper PA-22, PA-20, and PA-16 airplanes.
FAA holder: Trimmer Marvin E/Trimmer Aviation LLC
SA01923LAOther aircraft modifications
Installation of the P-1000 Digital Electronic Tachometer.
FAA holder: Horizon Instruments Inc
SA02280AKFuel systems
Installation of a Maule Fuel Selector Valve.
FAA holder: Trimmer Marvin E/Trimmer Aviation LLC
SA241CHOther aircraft modifications
Install Ceconite 101 fabric.
FAA holder: Aviation Products Systems Inc.
SA01100ATOther aircraft modifications
Installation of Composite Spinner.
FAA holder: TCB Composite Co.
SA2167NMOther aircraft modifications
Installation of the Precise Flight stand-by vacuum system (SVS).
FAA holder: Precise Flight Inc
SA00866SELanding gear and brakes
Installation of 8.50x6, 8.00x6, or 7.00x6 tires and tubes in matched sets on the main landing gear. The tires used in this modification must be manufactured under a TSO authorization. This modification is valid only as long as the aircraft is modified to a tailwheel landing gear configuration. The operating pressure for the main landing gear tires remains unchanged.
FAA holder: Morfitt Jeffrey A.
SA00854SEOther aircraft modifications
Removal of upper cross bar from control yoke(s).
FAA holder: Morfitt Jeffrey A.